• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Show us your Technics stuff

You're welcome :)

As for the zener, well, I haven't tested this one, but I think it'll be working fine.
 
While certainly not a sexy unit by any means, I just sold a Technics SA-626 about an hour ago. It was used for a while for a bedroom system, and it served me well. I found the treble quality and soundstage width were only "okay", and the bass was not quite as defined as I'd like, but it had very good clarity and had great depth to its sound. And at 65 wpc, it also had TONS of power. It sounded more like 130W rather than 65W. This was probably due to these receivers being biased hotter for a more powerful, livelier sound. Whether for good or bad, it worked. TBH, I only bought it because it had halfway decent internals; much better than the SA-424 and 222 models below it. At the time it was one of those silly impulse buys, but for the $30 I spent on it, I was surprised by its sound.
 

Attachments

  • IMG_0781.jpg
    IMG_0781.jpg
    56.2 KB · Views: 91
  • IMG_0782.jpg
    IMG_0782.jpg
    51.4 KB · Views: 66
  • IMG_0785.jpg
    IMG_0785.jpg
    50 KB · Views: 59
  • IMG_0786.jpg
    IMG_0786.jpg
    102.5 KB · Views: 92
  • IMG_0787.jpg
    IMG_0787.jpg
    80 KB · Views: 75
Last night I picked up an SU-8088 in excellent condition for a good price. I already knew it was fairly well regarded, but I was very surprised upon opening it to discover that it has discreet output transistors. It was made in 1979, and I figured by that point all the manufacturers had switched to the Darlingtons.

One thing I noticed is that it runs pretty warm, even when just using headphones. The guy who sold it to me says it's normal, whatever that's worth. I haven't connected it to my speakers yet.

Another interesting thing about the transaction. The only source he had hooked up for the demo was a CD player. (He had an impressive vinyl collection in another room.) He said, "Hope it's OK to use a CD for this." I took that to mean, sorry I don't have a turntable connected so we could demo some vinyl. It's just incredible to me how things have changed, how vinyl has become the dominant medium for so many hi-fi enthusiasts.
 
Last night I picked up an SU-8088 in...

One thing I noticed is that it runs pretty warm, even when just using headphones. The guy who sold it to me says it's normal, whatever that's worth.

It shouldn't run (too) hot.

This is a very nice amp, but it very often suffers from bad electrolytics, if you can look into that, you will probably solve the heat issue and keep it playing for the next 25 years.
 
what i have atm
the SA 340 is like new
 

Attachments

  • IMG_2103.jpg
    IMG_2103.jpg
    55.1 KB · Views: 49
  • IMG_0996.jpg
    IMG_0996.jpg
    73.8 KB · Views: 44
  • IMG_1082.jpg
    IMG_1082.jpg
    50.3 KB · Views: 50
  • IMG_1004.jpg
    IMG_1004.jpg
    58.2 KB · Views: 52
I saw this system selling on Ebay so bought it the hole lot was £50 so seems an OK price as it all goes great.
Have only had a few weeks but I think the amp is fine.

18749243878_f169e80e3d_c.jpg


For a bigger image

https://www.flickr.com/photos/30539771@N00/18749243878/sizes/l
 
It shouldn't run (too) hot.

This is a very nice amp, but it very often suffers from bad electrolytics, if you can look into that, you will probably solve the heat issue and keep it playing for the next 25 years.

Funny you should say that. I wonder if the electrolytics aren't stellar on mine. I'm less than thrilled with its sound. I connected it to my speakers, and it works OK, but my Sanyo DCA 611 beats it in terms of sound quality. The Sanyo is clearer and crisper in the highs, and the bass is more controlled. The Technics just isn't as lively, and I wonder if that's because of failing components.

Do you think recapping the thing would fix the unimpressive sound? The heat I notice is coming directly from the area of the output transistors. It creates heat even when it's completely idling.

It certainly has plenty of power. The weird thing I noticed is that many of the selectors have mechanical linkages. I never thought I would see that in a solid state device from this era. Why would they do that??
 
The mechanical links to the actual switches in fact is good engineering, it takes care that the actual switching takes place with as little "wiring" as possible, keeping the signal paths short, which will help reduce signal losses and distortion.

It might be bad capacitors prohibit the amp from sounding good, but it might as well be that the "sound" was designed in this way. In the era the 8077/88/99 were produced it was common to produce "neutral" sounding amplifiers. I did some tests comparing amplifiers and for instance an SU-8099 sounded a lot less "warm" than a Luxman SQ-507X, but by just moving the bass knob 3 clicks to the right it sounded exactly the same. But these differences are very difficult to notice, unless you have the option to use a switch and to directly compare the sounds.

Noticing the heat at idle might just be normal, but again, it shouldn't be too much. The only way to find out for sure is to measure the bias voltage of the power transistors, which is not too hard if you know how to use a multi meter. But if you're not experienced, you'd better leave it to someone who is, to avoid personal injury and/or damage to the amp.

I did some rebuilds of SU-8088's and 99's, to get an idea, for instance look here; http://www.audiokarma.org/forums/showthread.php?t=608272

(Some of the pics are gone, I will try to put these back).
 
I have nothing awe-inspiring, but I do like the equipment.

SA-404 in situ in my classroom
_DSC1741_zpsc1cdexev.jpg


SA-303 at home.
IMG_1800-1.jpg


_DSC0074_zps129d6604.jpg


The 1300 in the 303 system.
_DSC0103_zps6874df30.jpg
 
I think this is the only Technics component I own at this time, might be more stuff buried in the garage. I have since gotten the correct metal 45rpm adapter

sBiSPjJ.jpg


1q1byZL.jpg


sT3SoVk.jpg
 
Technics SU-3602 Refurb

I wanted to share my expereince of this amp - Jpn only (I think) 100VAC unit. Rated at 50W PC into 8 ohms, from approx 1972. As you can see it is quite lovely. Came to me not working. Complicating factors included that I could only find a service manual for a 3600 - which had a non-complementary output stage but which was otherwise identical in the powersupply, phono preamp & pre/control circuit stages. Otherwise the manual had no details on the poweramp stage or protect circuit. On powering up, "protect circuit" was playing up - this is a weird little circuit that doesnt switch the speaker outputs on and off, but which seems to short the AC secondaries of the poweramp powersupply (presumably if it detects DC) and thereby blowing a fuse. Replaced the relay driver transistor and this seemed to sort it. One output was also blown. After a total recap (which included some silmics) - replaced all outputs with new MJ's (24 and 25 types). Replaced DC offset and bias trimpots, after a while I got DC offset and bias levels sweet as. Got her going and she sounded fine, altho with some of that characteristic early Technics "mudiness" in the upper lows. Replaced all 2SA666's in the preamp circuit with new BC's - much better. Also replaced all the NPN & PNP pre-drivers in the power amplifier boards (3 on each board) with new MJE 150030 & 150031) - much more open, sweet and and more refined soundstage. I am never disappointed with the sound of Technics amps, and this one is no exception. Truly great sound.
 

Attachments

  • P1050072.jpg
    P1050072.jpg
    47.4 KB · Views: 77
  • P1050073.jpg
    P1050073.jpg
    47.1 KB · Views: 54
  • P1050069.jpg
    P1050069.jpg
    55.6 KB · Views: 60
  • P1050070.jpg
    P1050070.jpg
    46 KB · Views: 57
Last edited:
TECHNICS SB-6000A time-aligned stereo speakers

I love these speakers!
 

Attachments

  • 00o0o_kXJu22oXOzR_600x450.jpg
    00o0o_kXJu22oXOzR_600x450.jpg
    20.3 KB · Views: 35
Technics SA-600

Picked this up from a co-worker recently, immaculate, and with owners manual too!
 

Attachments

  • IMG_6244.jpg
    IMG_6244.jpg
    76.6 KB · Views: 58
  • IMG_6243.jpg
    IMG_6243.jpg
    49.6 KB · Views: 58
  • IMG_6241.jpg
    IMG_6241.jpg
    57.5 KB · Views: 59
  • IMG_6240.jpg
    IMG_6240.jpg
    73.7 KB · Views: 109
  • IMG_6245.jpg
    IMG_6245.jpg
    74.9 KB · Views: 67
Picked this up from a co-worker recently, immaculate, and with owners manual too!

The X00 series receivers are so nice looking and sound great. I had a 600 and for some odd reason I sold it. I've regretted it ever since I did. But at least I know the couple I sold it to is thrilled to have it. I've heard many compliments from them. If i find another 600 or happen to find a 700 I will definately keep it.

If you don't mind me asking how much did you give for the 600?
 
Back
Top Bottom