SX-D7000 Replacement Buttons

[jackattack13]

Hey All, I recently acquired a very clean (No banged up aluminum faceplate) and fully operational SX-D7000. The only thing it needs is a pot cleaning and the replacement of two missing buttons on the tuner. Can anyone recommend a source of 2 plastic rectangular buttons for the tuner section (Station Call 6 and Manual/Auto tuning buttons).

Thanks!

 

[markthefixer]

your only option is salvaged parts from a (dead) donor unit.

There are a few online seller sources , and then there's ePrey.

If you were a subscriber you could put in a (free) WTB notice in barter town...

 

[SimplerTimes]

Mark is correct. I have been looking for a bass knob and lever assembly for mine for over a year with no luck so far. I check the interweb auction site regularly. I even tried Barter Town to no avail.

 

[jackattack13]

your only option is salvaged parts from a (dead) donor unit.

There are a few online seller sources , and then there's ePrey.

If you were a subscriber you could put in a (free) WTB notice in barter town...

That's what I figured. I will keep an eye out on Ebay. Thanks.

Mark is correct. I have been looking for a bass knob and lever assembly for mine for over a year with no luck so far. I check the interweb auction site regularly. I even tried Barter Town to no avail.

That's a drag. I have a feeling I will be waiting a while too.

I pulled my face place apart to clean the pots and found that those are some specialty buttons. Cast metal with metal pins for the buttons. Different length pins for different functions. I can see why parts are a pain to find, not interchangeable with other models of the Era. Thanks for the reply.