• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

parts

  1. njappboy

    Vintage Parts Vendors 2026

    It would seem that we have lost some key vintage and substitution parts vendors due to various reasons and I was thinking it might be time for an updated list: - kpcomponents (Canada) - webspareparts (Portugal) - mouser (USA) - digiKey (USA) - jotrin (Hong Kong and Mainland Taiwan) - Moyer...
    • njappboy
    • Thread
    • parts repair parts restoration substitutes
    • Replies: 15
    • Forum: Solid State
  2. A

    Good place to find IC IG02970 for Yamaha CR-840

    Trying to find an IC for my Yamaha receiver. Anybody know any resources that might have them? The only ones I can find are in China.
    • ajiblock
    • Thread
    • diy integrated circuit parts yamaha
    • Replies: 14
    • Forum: Yamaha
  3. A

    Is there a known good source for SPEC parts?

    Hi, Recently bought a Spec-1 that was on a tech's bench used as a switching device (as I understand). This unit appears to have been a donor unit used to keep other units in service as various parts are missing. The unit is operational and rather well. Great!!! But I want to restore it as...
  4. raddy

    AKAI Reel to Reel Plastic Reel Retainer/Stopper

    Dear all, I am currently in dire need of a one of the plastic spring loaded reel retainers for my AKAI X165D since mine broke, along with the spring and C-clip (as my spring and C clip are deformed). They should be standard on every AKAI reel to reel that does not use the loose rubber stoppers...
    • raddy
    • Thread
    • akai help parts reel to reel reel to reel akai tape
    • Replies: 0
    • Forum: Tape
  5. D

    Pioneer PL-A45D - Sourcing Microswitch(es)

    Good morning all, I've had a Pioneer PL-A45D for a while now and it's in *mostly* good shape. Could use some lubing up and all, but the auto return works and the sound is good. Nice! Problem is, it suffers from that intermittent buzzing issue that many of these units exhibit. This has been...
  6. G

    Replacement part for SC-5330

    I’m hoping you can help me out with something. I need to find a replacement cover for the bottom of my Sansui tape deck, but I’m not sure if there’s a specific model that fits the same dimensions as the 5330. Or, is there another Sansui tape deck that has the same dimensions and I could just use...
  7. N

    Garrard 3D Printer Parts

    Hi, Just wanted to pass along that I have developed and posted some Garrard turntable parts that you can download and print from the MakerWorld web site. They're FREE. Garrard Zero 100 Stylus Gauge https://makerworld.com/en/models/561775?from=search Garrard Zero 100 Spare Cartridge Holder...
  8. Wilburchubs

    Nakamichi RX-505 spares needed

    Hi folks I have a RX-505 with a couple of problem switches,on the Dolby/Bias&EQ switch board,rather than replace individual switches,i think its best to change the whole thing,as i think individual switches will be tricky to find.If anyone has a BA05166A board on a parts machine,id be very...
    • Wilburchubs
    • Thread
    • nakamichi parts rx-505
    • Replies: 1
    • Forum: Tape
  9. M

    ESS 500a parts needed

    Good day everyone, hopefully someone will be able to help me . I'm looking to find a front button for my ESS 500a amplifier, and a blue bulb for lighting the meters
  10. Klebby

    Is this part difficult to find? (RCA solder board)

    I done goofed chasing down a buzzing sound in my speakers… struggled to get the wire tension relief opened and this (pcb?) board holding the solder joints for the RCA cables snapped in half… I’ve spent the past month working on this inherited turntable and my final issue was the buzzing… it...
  11. W

    What's This from a HK 730

    Recently received my NEW/OLD Harman Kardon 730. I'm pretty adept at mechanical and electrical. I needed to take off the front in order to get to the push button switches which were in poor shape and were causing dropouts and noise. Lamps were out as well and function selector switch needed a...
  12. Gerge_Sletar

    Pioneer A-6 faulty function switch

    Hello I'm looking for a replacement parts for a Pioneer A-6 doesn't seem to be many of them online other wise I would buy one for parts. The part in question is ASG-408 a bank of 5 switches 12 pins on each switch, they switch the inputs. One of the switches has worn out the plastic latch and...
  13. tutor_turtle

    AU-999 button needed

    I recently restored an AU-999 utilizing all the wonderful knowledge members here have on circuit mods and transistor substitutions. It came out outstanding. That said, the only short coming is the high filter toggle switch is missing the button. I can't really tell, but the shaft itself might be...
  14. wantmoretoys

    Looking for top cover metal forKR-9400 receiver

    OK, so I bought this older kenwood KR-9400 off a guy. Missing the top metal cover, and both wood end plates. I think I can make the wood parts, ok. I would like a top cover that is original, if that is possible. LMK
  15. J

    SX-D7000 Replacement Buttons

    Hey All, I recently acquired a very clean (No banged up aluminum faceplate) and fully operational SX-D7000. The only thing it needs is a pot cleaning and the replacement of two missing buttons on the tuner. Can anyone recommend a source of 2 plastic rectangular buttons for the tuner section...
  16. AkanameJones

    Forum section for parts?

    Hey everybody, hope you are all doing well. Is there a section of the site dedicated to parts? Caps, resistors, inductors, etc. I have some cap and other part ID questions. Been digging on the web but can't find what I am looking for. Thank you! Jeremy
  17. Willemdb

    Sony mini set CD drive sourcing. Where?

    I have been repairing 90's Sony minisets for a while. I like them and they're very easy to take apart. All screws. Now I have one that is particularly nice, it's got tape, minidisc and CD. The CMT-CP500MD, or HCD-CP500MD. Minidisc's got MDLP and double speed copy. Anyway, all that tape and MD...
    • Willemdb
    • Thread
    • cd parts sony
    • Replies: 0
    • Forum: DIY
  18. diddlebunk

    Technics SP-15 drive coil cover parts replacement?

    I just discovered that the drive coil cover around the spindle of my SP-15 is cracked. https://ibb.co/DgsPZLJ I spotted this available part (SFMGQ20-01) but neither the SP-15 nor the SP-10 are listed, so I’m not sure that it is compatible. The SP-15 service manual does not appear to specify...
  19. M

    Westinghouse Record Player Identifying

    Hello, I am hoping someone might be able to assist me in identifying the Westinghouse player in the photos. It looks a lot like a Westinghouse Rainbow Toner but the face appears to be more up to date and more of a replica of older models. Also, you will see that it is missing dials and knobs...
    • Matty Matt
    • Thread
    • diy fix help ideas identify parts record player restore westinghouse
    • Replies: 4
    • Forum: Dollars and Sense
  20. Will Gregory

    SX-1280 Tone control variable resistors

    Hi folks, I am a brand new member and have just acquired an SX-1280. The unit works ok but has a couple broken tone control shafts an I am hoping someone can help point me in the right direction to get them replaced. Do any of you have the Bass 50hz ACW-101(ACV-165) and the Treble 10khz...
  21. Megaladoink

    CARVER CT-17 PreAmplifier Part Needed - Power Button

    I am looking for a power button for my CT-17 PreAmplifier. Ive been pushing the little button with the tip of my finger and have some time to get to the little tasks Ive been meaning to do. Anybody know who would have those? or if somebody has an extra. I actually bought one years ago and cant...
    • Megaladoink
    • Thread
    • carver diy parts
    • Replies: 3
    • Forum: DIY
  22. C

    Looking for a part

    I have a JVC QL-Y55F turntable, I saved it from being tossed in the dump, but it is missing the Tonearm and the dust cover other than that everything seems to function.. My question is two part where can I get the tonearm? I saw a couple on eBay for crazy prices. Are their other models that can...
  23. C

    Replacement Parts

    Where do you find is a good online resource for replacement parts? I have a ‘77 JVC receiver that is missing the correct knob for the on/off switch. I have checked eBay and googled the part by part number, etc. What is my best option for getting replacements for model specific parts?
    • CS Borger
    • Thread
    • knobs parts repair replacement part restoration
    • Replies: 6
    • Forum: DIY
  24. LesE

    Pioneer Parts Database

    Pioneer Parts Database This is a project that I've been working at off and on for the past few years. I started it because of concerns related to the database on the Pioneer Electronics site. I began by scraping whatever I could get out of the Pioneer Electronics Database. I then added to...
  25. C

    KT-5300 Faceplate Foam

    Hi, Folks, I recently picked up a KA-5700 along with a KT-5300. I shipped the 5700 to a tech for repair, and kept the 5300 on my bench for some cleaning. The interior of the 5300 is immaculate. It looks brand new. The outside needs some cleaning and touch-up, but nothing a little soap and...
Back
Top Bottom