• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

parts

  1. M

    Vinyl Nirvana and Shipping to the UK

    Hi Everyone Vinyl Nirvana has stopped shipping from the USA to the UK because of lack of clarity of the rules post BREXIT. As I continue my rebuild of a TD 160 I wanted to buy a set of the Vinyl Nirvana Springs. Has anyone else encountered this problem and found a cost effective way to...
  2. ASRHTB

    Akai GX 600-DB Playback Components

    Hello, I am new at the forum; forgive me in case of any misunderstanding. I have Akai GX 600-DB, and working on replacing parts of * Semi-fixed / vol v8k4-1 50kB * inductor RX 22 mh * headphone trans. N16 - 535S I could not find these three components. Could you suggest to me where to find...
  3. B

    McIntosh mx110 bottom plate part

    Hello, I have an mx110 but the bottom mounting plate is missing. I have looked on the internet but I can’t seem to find one anywhere. I was hoping someone in the community would have any ideas on where to find one. thanks, Blake
  4. funkingkyle

    Where to get Denon DP-62L arm tube fixing screw?

    Hi all, I recently picked up this table and I'm really enjoying it. It is missing what the manual calls the "arm tube fixing screw" -- you can see in the photo I am pointing to the threaded hole. Does anyone know where to get a replacement or if there is something generic I can use? Seems to...
  5. VintageDutch

    Might have found a STK Module source

    Hi, Today I went to a local electronic parts shop where I buy lots of "run of the mill transistor and other brand new "e-waist" :) The owner had a bit of spare time And he told he might have a nice stack of ORIGINAL **N.O.S** STK Power AMP modules Might be coming up for sale. There are some...
  6. VintageDutch

    Parts supplier who knows this Site

    Hi all, Just wandering... does anyone has experience with Instrumental Parts? Hunting for some old headphone parts and they claim to have them but now picture is shown ... Prices seem reasonable... Any one a good idea about these guy's?
  7. VintageDutch

    SONY STR-6046 repair..

    Hi I got my 5th receiver in .... It is a nice little SONY STR 6046 Goal is to restore it to be functional and keep it in my personal collection. Upon first check The Amp does run fine, but the reciver part (AM a FM) is not functioning. Also AUX and Phono only give one channel.. On further...
  8. M

    Sony TC-377 Parts Help

    Hi All, I've come across a Sony TC-377 tape deck which is cosmetically in superb condition. I am familiar with these decks and have serviced them before. It looks as if someone was part way through servicing the unit when it was abandoned for whatever reason. All parts are there except for the...
  9. John Killian

    Pioneer (2) HPM-100 & (2) HPM-40 Repair Recommendations

    Just got my hands on these today and I'm really excited. I definitely paid more than I wanted but considerably less than they're worth,from what I have researched. I'm a total rook in the world of vintage gear in mostly all aspects..full disclosure lol My father's always had 70s era gear so I...
  10. B

    Replacement parts for SL-3200

    Hi, first time owner and was looking for parts to fix up a Technics SL-3200, specifically the rubber feet and headshell. I was looking through the service manual and for the rubber feet the PN seems to match those of the SL-220, but it the springs in the feet seem to differ between the front and...
  11. Z

    Hitachi HA-5300 speakers relay

    Hi Everyone. I am learning from all of You from some time but this is my first post. I have stumbled upon a problem for which I did not found an answer. I am during restoration of Hitachi HA-5300 and the mentioned speakers relay is in quite bad state (see the attached photos) it don't even have...
  12. B

    Pioneer cs 99a Speakers (need mid-range replacement speakers)

    Just grabbed a pair at a vintage store, $300.00, they look sharp and the base sounds good, but 3 of the 4 midrange have issues and need replacing. Anyone have suggestions for replacement speakers? PS I looked through 6 pages for this or similar topic, I did not find nor can I find an advanced...
  13. D

    Parts Magnavox W747-01 Made in England

    I am looking for a donor turntable chassis to scavenge parts for the W747-01. The plastic gear is missing some teeth. Or, a source for the part. I could also use a service manual.
  14. dastinger

    Are these parts compatible?

    Hey guys, I have a Denon 3803 that needs a new PCB. The one that it needs is the 1U-3473-2 (page 46 on the service manual). Now, there's one from a Denon 2803, part number 1U-3486-2 available on eBay (page 41 on the service manual). They use the same chips and look exactly the same on the...
  15. otodus

    Hard to find headshell (PL-41)

    Hi all! Hoping the AK community can help me out. Been slowly fixing up/re-repairing an old Pioneer PL-41. I’ve had a janky headshell for a while and would like to finally get the real deal. Problem is it’s hard to find the original headshell these days. Newer ones are also far too light for the...
  16. OLLIE31770

    ISO Magnavox Micromatic mounting hardware screws

    I recently was gifted a portable suitcase style Magnavox Micromatic turntable in need of repair. Upon inspection it only needed minor repair, but I found all 3 of the strange shaped mounting screws had snapped. The weight and jostling of the turntable in an upright position had caused the...
  17. J

    ISO Marantz 2265 selector switch?

    hello, Im needing a selector switch for my 2265. Part # SR10060150. Fedex busted mine off during shipping, not having any luck tracking one down. Any help is appriciated.
  18. M

    Source for Magnavox parts

    I'm new to vantage audio equipment and was looking for some advice. I just acquired a 1969 Magnavox Asto Sonic console. The original turntable mat isn't correct, so I'm wanting to change it to the original. Is there a source for original parts or do you guys just watch Ebay for parts?
  19. Stink Bear

    RS-2004A parts / project?

    Hello, Looking for RS2004A parts at a reasonable cost. I have a unit that is cosmetically decent, but it has a shorted STK-0500, is missing the antenna, and a couple of equalizer knobs are not the correct ones. I like the looks of the unit and would like to get it working but I don't want to put...
  20. Ste d

    Noob with a question Denon DP 45F

    I just bought this tt at Goodwill for $8.00:banana:. Great deal, but... I need a platter and mat before I can find out what else it needs. If anyone can help by pointing me in the right direction, I would surely appreciate it. Thanks, Steve
  21. Mike Sweeney

    Fakes on eBay.. just how bad are they?

    I picked up four Elana 10,000uf 80 volt caps as part of a project I have. I've been getting an assortment of caps for fitting into a replacement package for a 2285B Marantz and I have been trying different brands and types. But, I ordered these off my phone while at a event and bored. Got to...
  22. Nemo bit

    In need of parts for a Sansui g-9700

    I was lucky (At least I thought) that a good friend bartered a Sansui g-9700 To me. I was told by his son in law that it had a board split that appears to me what ever runs length on back of reciever in cab opposite of rear heat sink . Unfortunately I have yet to see the board or ? As it is...
  23. B

    Onkyo M-510 Grand Integra Parts...

    Hello looking for the power supply board for my M510... please advise is you know of any place to buy this part (used i guess) it can be 100volt or 230volt thanks albert
  24. Ronito6

    IDK video - The company that officially offers parts and service for vintage Sansuis

    ...and they make little to no profit doing it. While taking another stab at locating an AU-X11 service manual I was lead to this video. It was produced by NHK World and is used for English language education. So it is a bit odd and not very polished in many ways...
  25. M

    RSE and Ohm B bookshelf speaker advice

    Hey all, been lurking for a while, but my first post. I came in to a set of RSE's with EMIT tweeters for the lovely price of $0. Finally got a chance to test them out and uh oh... no foam surrounds and what looks like a blown voice coil to my untrained eye. I did something I know I shouldn't...
Back
Top Bottom