• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

parts

  1. S

    replacement for SX-1250 antenna

    Hi All, I'm restoring a Pioneer SX-1250. Very much appreciating the restoration thread on the forum. On my particular unit the antenna mount is broken and one of the wires (red) has been yanked out of the antenna. There is not any slack on the antenna side to splice it. I haven't been able to...
  2. oldboats

    KR-8050 / KR-9050 Interchange?

    I am asking here as it seems the most likely place for anyone to know the answer and some of you have actually been in the guts of several pieces of equipment. Does anybody have any idea if the following parts on a KR-9050 and a KR-8050 are the same (part numbers where provided taken from the...
  3. Kecap Manis

    Parts Supplier

    Hi. I need to buy some Toshiba transistor parts for an amplifier made in 90s. Some of the parts are found at B+D Enterprises in Florida. Can anybody give feedback regarding their product reputation? Thanks.
    • Kecap Manis
    • Thread
    • parts toshiba transistor
    • Replies: 2
    • Forum: DIY
  4. Wlporter

    In search of woofers/hexagon marantz DS 900

    hello, I just bought a pair of Marantz DS 900s and it was missing the original woofers and hexagon plates. Does anyone know of where I can get these or does anyone have them from maybe speakers they are parting out thank you
  5. Vashane

    Denon DP-61F tone arm

    I heard these are good TT's and would like to get this one repaired. The tone arm is broken and did a lot of searching for replacement arms....found nothing. So am asking if anyone could get me going in the right direction on finding a replacement or in contact with anyone who might have parts...
    • Vashane
    • Thread
    • denon dp-61f help parts turntable
    • Replies: 7
    • Forum: Turntables
  6. GAP_FL

    Pioneer A-88x Bass Pot & Knob

    Just had my Pioneer A-88x repaired and refreshed. It's back in its hole, driving a pair of Boston A-150s quite nicely, thank you very much. Unfortunately, my FedEx driver apparently used to work for Samsonite as a luggage tester. I need a Bass adjustment pot and knob (upper left in the pic)...
  7. D

    Tonearm socket

    Made a post a while ago inquiring as to the name of a certain part on my turntable. What I am looking for is a tonearm socket for the Toshiba SR-A200. Do I need the exact same socket or can I just buy one off ebay?
    • data_lore
    • Thread
    • parts repair socket sr-a200 tonearm toshiba turntable
    • Replies: 1
    • Forum: Turntables
  8. D

    Toshiba SR-A200 HELP

    Ok so I recently found a toshiba sr-a200 while digging through all the junk in my garage. It's pretty complete EXCEPT it's missing a part that connects the headshell to the tone arm or arm tube not sure what it's technically called (i'm new to turntables sorry). Anyway I cant seem to find this...
    • data_lore
    • Thread
    • diy headshell parts repair tonearm toshiba turntable
    • Replies: 0
    • Forum: Turntables
  9. FRANKRAUSE

    Mystery Knobs

    Hi everybody, I've been trying to track down some knobs for a restoration, and I can't seem to find any information or suitable replacements. The knobs are black anodized aluminum, and they're 7/8" x 5/8" or 21.75mm x 16mm. They have a single setscrew and are made to fit a 1/4" shaft...
    • FRANKRAUSE
    • Thread
    • fixing knob parts project reciever restoration stereo vintage
    • Replies: 3
    • Forum: Tuners
  10. adrian78m

    Pioneer SX-939 Recap

    Hello all, I want to do a full recap of my sx-939, including transistors, and whatever other parts that should be replaced. Can someone point my in the direction of a full list of the parts I should get for this? What should be replaced? Thanks.
  11. D

    Yamaha D71 Counterweight Replacement...

    My Dad's D71 is missing it's Counterweight after moving across the country, we have no idea how. So far I've come up with no leads other than an item on EBay that has since been sold. Yamaha does not have this part in stock anymore and none of the manuals give a part number, weight or diameter...
    • Dr. Floyd
    • Thread
    • counterweight d71 help parts yamaha
    • Replies: 11
    • Forum: Turntables
  12. momosween

    Help identifying AKAI GX 365D Components (diodes)

    I'm in the process of taking apart my Akai deck to recap and replace some diodes. The ones I'm focusing on are on the main control board since those caps appear to be the leakiest...however, my multimeter doesn't have a function to test diodes and I can't tell what their values are because the...
    • momosween
    • Thread
    • akai akai gx 365d diode mouser parts reel to reel restoration
    • Replies: 0
    • Forum: Tape
  13. Ronito6

    Name that part

    Trying to find this online is no treat. Could someone please tell me what search terms or where to use to find these? Here is what I do know: The pins are 1.8 mm thick. The pins are 14.5 mm long. The top / plug portion is 8.5 mm long and the bottom/solder portion is about 3.5 mm. The pitch...
  14. J

    C-70 Repair - Pre out jacks are bad -

    Hi It appears my Pre out jacks are bad. It's not a broken solder joint on the board. 1. Does anyone have this part? 2. Are their excellent techs here who provide restoration on the M/C/T - 70 's??? What does it entail and idea of cost. Yes I know Legendary is an option.
    • JoeMt
    • Thread
    • jacks parts pre out repair restoration
    • Replies: 20
    • Forum: Yamaha
  15. Almiscarado

    Wanted - Elac Miracord / Miraphon Counter-weight and head

    Hi there! A friend of mine got me an Elac Miraphon 22H in very nice cosmetic status, but unfortunately the counter-weight and the whole head and cartridge are missing. Also the small metal disc on top of the platter is also missing. Does anyone have an Elac for parts that is willing to part...
  16. Franco989

    Pioneer sx xx50 Parts (switch cap)

    Hi fellow AKer's I was wondering if anyone out there has source for getting pioneer sx parts, what I'm mainly looking for is a switch cap for an sx-750. From my understanding the whole 50 series use the same cap. Already tried eBay but nothing is coming up. If any of you out there has one that...
  17. S

    Is a Technics SA 5370K worth it?

    I have the opportunity to get this thing for about 55$ and usually gear like this costs double or more on the auction sites in my country(even lo-fi gear is terribly overpriced). It looks good, no scratches, no dents. The add says that some stations do not come in in stereo all the time. It...
  18. C

    Been a while from my last post, but it seems like I picked up a bit of an rare little odd duck...

    I saw the speakers yesterday at a rummage sale and they were listed at $650 and spent a little time looking then over and the guy in charge of the electronics told me that everything was going to be 50% of today. then I spent some time looking at the other junk at the sale and circled back to...
  19. RawWattage

    Yamaha CR-2020 Power Board & Electrolytic Cap. Board Kits?

    Hello all, Been rehabilitating the old YamaHamma as best I can but these boards are just falling apart. I know these components are famous time-bombs. Lets say I had brand new boards and all the upgraded components, would any body be interested in buying these as a do-it-yourself kit...
    • RawWattage
    • Thread
    • cr-2020 parts power board yamaha
    • Replies: 32
    • Forum: Yamaha
  20. Baker_86

    Sansui G8000 parts

    Hey guys, Just picked up a Sansui G8000 today. It is missing a back "bumper" that keeps one from bumping the heat sinks. Does anyone know where I can get parts or if there are any out there? Thanks Ross
  21. R

    Marantz SR 6000 / Marantz SR 7000

    Have a question, are the SR 6000 and SR 7000 Marantz stereo's the same electronics internally ? I cannot seem to find the slide switch mounted on the PC board anywhere so thought if the SR 7000 is basically the same machine I would purchase one and remove the parts required. Thank you
  22. Kahoona

    Mitsubishi DA-A7DC help needed

    Hi I am hoping that some kind soul can offer some help. I have a DA-A7DC that I picked up recently. I wanted to set the bias and DC offset.I found this thread and I have set DC on many amps. http://www.audiokarma.org/forums/index.php?threads/mitsubishi-da-a7dc-bias-and-dc-questions.441384/ I...
    • Kahoona
    • Thread
    • bias da-a7dc mitsubishi offset parts
    • Replies: 28
    • Forum: DIY
Back
Top Bottom