Name that part

[Ronito6]

Trying to find this online is no treat.

Could someone please tell me what search terms or where to use to find these?

Here is what I do know:

• The pins are 1.8 mm thick.
• The pins are 14.5 mm long. The top / plug portion is 8.5 mm long and the bottom/solder portion is about 3.5 mm.
• The pitch is 5 mm for the 2 pins but 7.4 mm for the last.
• The pins are round.
• They seem to be gold plated

Hoping also to source the matching connectors too.

Here are pics

"male"

"Female"

All input appreciated!

 

[Hipocrates]

male----> PCB header
female--> PCB receptacle

But I would like to find the part number

 

[Hyperion]

male----> PCB header
female--> PCB receptacle

But I would like to find the part number

+1 me too!

 

[Hipocrates]

Challenge accepted!!

 

[petehall347]

molex springs to mind .. not sure if it is molex though

 

[Hipocrates]

maybe something molex kk 508 or similar can fit...

searching....

 

[Ronito6]

+1 me too!

I thought I was the only one with this problem. There is always just soldering wires directly to the board...but...hassle.

maybe something molex kk 508 or similar can fit...

searching....

WOW!! Thanks for the effort.

I pray your process bears fruit.

Mine hasn't...yet.

 

[Hipocrates]

There is always just soldering wires directly to the board

After all, the best connector is no connector at all, right?... but shhh John can hear us, and then we will be in problems ...

No luck yet.

 

[petehall347]

i remember using solder turrets ..

 

[Ronito6]

i remember using solder turrets ..

These things?

Ugh. Double the work and fuss. BUT... Looks like a very solid way forward though if needed.

A lot more solid than soldering wire to pad.

Thanks for the tip!

 

[avionic]

^
Turrets

 

[petehall347]

These things?

Ugh. Double the work and fuss. BUT... Looks like a very solid way forward though if needed.

A lot more solid than soldering wire to pad.

Thanks for the tip!

yes them are those . some have a slot cut in the top to solder the wire into .

 

[Ronito6]

yes them are those . some have a slot cut in the top to solder the wire into .

Thanks again!

As it seems the kind of connector I'm looking for is hard to come by, turrets seem at this point a great second choice.

If the real deal comes up to me first I will post the details here.

Anyone out there...feel free to beat me to it.

 

[Willy6]

These things?

Ugh. Double the work and fuss. BUT... Looks like a very solid way forward though if needed.

A lot more solid than soldering wire to pad.

Thanks for the tip!

Prabably get a better connection with those..

 

[Ronito6]

Prabably get a better connection with those..

Absolutely. Despite the drawbacks of going this route, the problems of iffy connections and corrosion are best sorted using these.