No tone controls on the Technics ?
There are & I'm going to have to fiddle w them to tame the beast down.
I'm going to switch out the CD player too.
I have a Sony thats less bright than the player I'm using.
No tone controls on the Technics ?
I have a Khozmo and also a Nobsound. They both are transparent and smoother than my active pre's. My amp has a high input impedance too so they match well. The Nobsound is only a bout $60 while the Khozmo has their own ladder resistor volume control so it costs a bit more.What exactly are you using for a "passive switcher"?
The Khozmo looks like a nice well made little unit. I have a "chi-fi" piece someone gave me, an FX-AUDIO TUBE-03 that is billed as a "mini hifi audio preamplifier". It has tone controls, a volume control, and two chinese 6K4 tubes. I'm assuming this is not passive though, and I didn't even consider running it between the Dac and the power amp. While awaiting my selection of a preamp, I've just been running the preamp section in the DAC itself.I have a Khozmo and also a Nobsound.
The Khozmo does sound a little better than the Nobsound in the high frequencies mainly. Cymbals have better resolution and extension. I would guess that a quality analog volume control would sound better than the DAC.s control. I haven't heard the little Chi pre's.The Khozmo looks like a nice well made little unit. I have a "chi-fi" piece someone gave me, an FX-AUDIO TUBE-03 that is billed as a "mini hifi audio preamplifier". It has tone controls, a volume control, and two chinese 6K4 tubes. I'm assuming this is not passive though, and I didn't even consider running it between the Dac and the power amp. While awaiting my selection of a preamp, I've just been running the preamp section in the DAC itself.
I got a quote from Yellow Freight to ship the Moab from Denver to Tekton and it's way less than I thought. Around $380 including insurance. So I'll probably roll the dice and give them a try.
Interested to know your thoughts on the PL-300 and the Tektons. I’m looking at the same Amp.Exactly my experience. When I first got the Tektons, all I had was a little Topping headphone amp borrowed from a friend. I expected nothing, and yet it was listenable. Then I excitedly plugged in the Rogue Cronus Magnum II I borrowed from a dealer. Of course, the sound opened up, there was tight lean bass, and a big sound, but the midrange was dreadful for voices and choruses, or massed violins. This was with many reference sources and tracks with which I had become familiar. I am assuming that it's not a question of the Cronus being a bad piece, but a mismatch between the Tekton 7-tweeter array and the fiercely pushed KT120 tubes at 100 watts. When I got my old broken B&K ST-140 back from repair, while awaiting the PrimaLuna demo unit, I hooked it up and all the Cronus problems were GONE. Now..I had the strong coloration that I know to be characteristic of the ST-140. A very relaxing and listenable musicality, without the detail and clarity that the Cronus had provided. Although listenable, the midrange now sounds veiled and dark. At times, even a bit mushy. The wonderful spatial placement and some of the soundstage of the Tektons were still there however. I began to have a sense of 1) what the Cronus was contributing, 2) what the ST-140 was contributing, and 3) what these speakers are capable of. I can't wait to get some decent electronics behind them. I have high hopes for the PL 300. This weekend will tell.....
Since I got the Tektons back in late December it has been an interesting journey. There are many things I love about these speakers: soundstage, imaging, transparency, speed. Lower midrange instruments in small combos are great. Where I am having a problem is a sense of constriction in the harmonics of the upper midrange: specifically, female voices, large chorus, solo and grouped violins. They can sound "nasal" and edgy to the point of annoyance. Whereas, the cello range is sublime. Nice tight bass. They are superb with rock and electronic music. But I listen mostly to acoustic music, and the human voice is very important to me: Schubert lieder, Mozart masses and that sort of thing. I have actually come to dread shrieky violins listening on these speakers.Interested to know your thoughts on the PL-300 and the Tektons. I’m looking at the same Amp.
Where I am having a problem is a sense of constriction in the harmonics of the upper midrange: specifically, female voices, large chorus, solo and grouped violins. They can sound "nasal" and edgy to the point of annoyance. Whereas, the cello range is sublime. Nice tight bass. They are superb with rock and electronic music. But I listen mostly to acoustic music, and the human voice is very important to me: Schubert lieder, Mozart masses and that sort of thing. I have actually come to dread shrieky violins listening on these speakers.
A Denafrips Pontus is on the way. But since they got hit pretty badly with Covid-19 in Singapore, it's possible it may be delayed. But I am certainly hoping that will make a significant difference when it arrives.A better DAC helped smooth things out for me and I was amazed at the difference a good DAC could make
Yes quite a bit. Toe-out from the standard position is better. Obviously there are positions that are much better than others. But it looks like that alone will not be enough to correct the problem.Have you tried messing around with positioning? Specifically toe in/ toe out?
That's another issue for me. Because of the way my furniture is laid out, my listening position is only 7-8 feet from the speakers. Even the the length of the "Great Room" is 24 feet. Of course, I could throw out my modular furniture and make a huge listening room. The harpsichord is already occupying the normal 'dining' area. Who needs a living room?my listening position is about 12 feet from the speakers
I have Electron SE's, which are very different in design than the Lore's. I would be interested in any info about speaker cables with Tektons as well, but I haven't gotten there yet. Need to get by new DAC delivered, and still swapping amps for a final decision. I will say that in general, I have heard that the silver makes the cables more "detailed" but can be colder and more "analytical". If that's the case, I myself will go with copper, because I already have plenty of "detail" and transparency in the upper midrange. I need a little more warmth. I doubt anyone can tell you which "is better", it depends on your whole system chemistry, not just the speakers. Even your acoustics and room reflections can drive the choice. As always, if you can find a cable dealer that will let your trial both at home with your equipment, that's the way to go. I'm doing that now with StraightWire...they're going to send me a bunch on trial.What I would like to know from the Tekton-wielding masses is this: Do these things shine brighter with copper or silver-plated copper speaker cables?
I have Electron SE's, which are very different in design than the Lore's. I would be interested in any info about speaker cables with Tektons as well, but I haven't gotten there yet. Need to get by new DAC delivered, and still swapping amps for a final decision. I will say that in general, I have heard that the silver makes the cables more "detailed" but can be colder and more "analytical". If that's the case, I myself will go with copper, because I already have plenty of "detail" and transparency in the upper midrange. I need a little more warmth. I doubt anyone can tell you which "is better", it depends on your whole system chemistry, not just the speakers. Even your acoustics and room reflections can drive the choice. As always, if you can find a cable dealer that will let your trial both at home with your equipment, that's the way to go. I'm doing that now with StraightWire...they're going to send me a bunch on trial.
I will be posting as the journey continues. In the meantime, here are some pictures to whet your appetite.
Tekton Enzo XL
![]()
I have the Enzo XL's in Ferrari red, like this picture, and I love them!!
The new design should be even better.
They are a little shorter due to the fact that they now have only 1 front port.
Unfortunately, that option is rather limited where I live (middle of nowhere). I have heard the same comparisons re: silver vs. copper, but I've wondered if silver-plated copper might be the best of both worlds, and if the Lores have a certain bias toward a particular cable. I know Eric recommends Mogami (and sells it on his site), but I have no experience with those cables. I guess I'll just have to see for myself.
Also, I know this might be unorthodox, but has anyone tried Zu cables with Tektons? There are quite a few for sale on eBay right now, and I wonder if that might be a more economical approach.
Unfortunately, that option is rather limited where I live (middle of nowhere). I have heard the same comparisons re: silver vs. copper, but I've wondered if silver-plated copper might be the best of both worlds, and if the Lores have a certain bias toward a particular cable. I know Eric recommends Mogami (and sells it on his site), but I have no experience with those cables. I guess I'll just have to see for myself.
Also, I know this might be unorthodox, but has anyone tried Zu cables with Tektons? There are quite a few for sale on eBay right now, and I wonder if that might be a more economical approach.
I wouldn't sweat the cables until the listening space is treated. Its not as sexy as cool new stuff but it has alot more effect on what you hear.
I have Lore S's (no longer available - Lore w Seas drivers) & they were fabulous in the treated room.
We just moved & the listening space is not treated yet...... the difference is obvious.
Best of Luck w the Lores.