• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

I've been eyeing Mini Lores or Lore references, but...

I heard recently from someone with a pair of Lore References that their one weakness is that they're not great at low volume. I find myself listening at low volumes more and more often lately, so this could be a problem. To those who own the Mini Lore or Lore reference, how do you find they do at low volumes?

I'm surprised to hear that. I have Lore S (Lore w Seas drivers) & they sound great at low volumes. You might want to turn up the bass a bit but its not really necessary. Maybe if you're a hip hop guy or listen to super thumpy dance music but (IMO) the Lores would be a poor choice for that regardless.
 
I've been eyeing Mini Lores or Lore references, but...

I heard recently from someone with a pair of Lore References that their one weakness is that they're not great at low volume. I find myself listening at low volumes more and more often lately, so this could be a problem. To those who own the Mini Lore or Lore reference, how do you find they do at low volumes?

I've owned both speakers and never found this to be an issue, but what is low volumes to you? To me its in the 60s to 70s db wise. I do recommend if you like to listen at low volumes to have a loudness circuit in the mix. It will make the sound fuller.
 
Last edited:
I'm owned both speakers and never found this to be an issue, but what is low volumes to you? To me its in the 60s to 70s db wise. I do recommend if you like to listen at low volumes to have a loudness circuit in the mix. It will make the sound fuller.
Ohhh loudness, yes! That's a great point, and I think might be his problem!

The guy who told me this is using a PassDIY amp and preamp that don't have tone controls. He mentioned he used to have a Schiit Loki (equalizer) that he took out of his system because he found himself always always leaving the EQ flat once he did room treatments. But that is probably his low-volume issue.

Anyway, I checked while listening at my "low volumes" last night and I was at like 50-60 dB. Yes I have an NAD 1600 preamp/tuner that has both a loudness switch and bass/treble controls. I listen with the loudness on almost all the time. I'm highly in favor of tone controls, and the tendency of audiophile quipment to omit them in the past 20 years or so years drives me crazy. But I'm glad that trend is starting to reverse more recently. Hopefully by the time I get around to building PassDIY preamp there'll be one with tone controls...though with Pass' minimalist philosophy, I may be dreaming. We'll see.
 
Last edited:
Ohhh loudness, yes! That's a great point, and I think might be his problem!

The guy who told me this is using a PassDIY amp and preamp that don't have tone controls. He mentioned he used to have a Schiit Loki (equalizer) that he took out of his system because he found himself always always leaving the EQ flat once he did room treatments. But that is probably his low-volume issue.

Anyway, I checked while listening at my "low volumes" last night and I was at like 50-60 dB. Yes I have an NAD 1600 preamp/tuner that has both a loudness switch and bass/treble controls. I listen with the loudness on almost all the time. I'm highly in favor of tone controls, and the tendency of audiophile quipment to omit them in the past 20 years or so years drives me crazy. But I'm glad that trend is starting to reverse more recently. Hopefully by the time I get around to building PassDIY preamp there'll be one with tone controls...though with Pass' minimalist philosophy, I may be dreaming. We'll see.

And there are plenty of units with a defeat or bypass for the tone controls if you want them out of the circuit..... so you can have it both ways.
 
Tekton double impact owner here. I have a question about adding a resistor to take the edge off the treble. This was mentioned in a youtube video but I am unsure as to how to properly hook up the resistor. It sounded like it goes + resistor to + speaker terminal.- resistor to - speaker terminal. But I would think it would go +amp to + resistor then - resistor to + speaker
 
I've been listening to my Tekton Lores for a bit less than a year now, in 2 different rooms. Normally they are powered by my Fisher X-100-B which is heavily modified and upgraded (PIO caps, zener mod, updated power supply, diodes, retuned RIAA circuit, and to top it off, I have a drawer with 20 or so 7868s, and 30 pairs of 12ax7 variants to choose from) though I also rotate in whatever amps I have recently restored for a week or two at a time to ensure my work is up to snuff. The Lores are incredibly good. I have a pair of Thiel CS2s that do certain things a bit better, but they also lack the extension and front-end versatility of the Tektons, and adjusted for inflation, their new cost is well over 3x the price of the Lores. The Lores produce effortless deep bass that stays in time with the music better than almost any other speaker I have heard, no doubt due to the single full range driver. They are perhaps not the last word in vocal reproduction, but I have never felt they were weak, either. And they are probably the best speaker I have encountered when it comes to fun. Funk, blues, rock, big classical scores, jazz and big band... On these speakers, it all makes my head nod, my toes tap and really brings the fun.

In my new space, I'm having trouble dialing in the best sound from them. They seem to have liked the larger room that I used to have them in, but it could just be ME and not the speakers that prefer the larger space. (I was in an apartment where these were in the living room, but that's not practical since moving in with my lovely lady in her townhouse, so they're in a dedicated extra bedroom that I've converted to my listening room and electronics repair shop.) I would like to improve the sound staging if I can, and I sometimes feel that the response above 14kHz is somewhat rolled off even when using quality solid state gear. The sound stage is decent, but not especially wide, and lacks precision.
Front-end includes a Project Debut Carbon DC with ortofon 2m blue, Schit Bifrost DAC fed by various sources, and the Fisher FM-100-B tuner. My cabling is mid and high level audioquest interconnects and bettercable speaker cables.

My space is a carpeted 12'x 11'6" room, couch on one wall with the stereo opposite, as pictured. To the left, out of the frame, is a closet (mostly soft items inside) with sliding doors that I normally keep open. Out of the frame to the right is my electronics repair bench, in front of a window with curtains. That effectively manages 1st reflections, I would say. Since the photo was taken, a portion of the the blank wall space above my FM-100-B tuner is now decorated with fabric wall art from my cousin, which covers some egg-crate foam pinned to the wall. The corners are occupied by a pair of gutted ESS AMT1s that are in the rehab queue, with house plants and foam rollers atop those (we're both endurance athletes so foam rollers and trigger point massage stuff litters every room of the house). The rear wall is mostly blank, though I usually put the couch pillows along it behind my head when listening. The corners are occupied by a low metal file cabinet with a nice sized house plant atop it, and the other corner must remain open for the door swing area.

When listening, my ears are 24" from the rear wall, with 8 or so feet of open floor between me and the speakers, which are separated by about 7.5'. They are currently about 6-8" out from the wall, and toe in angle is roughly half way between pointing straight forward, and pointing straight at me.

Have any of you put the Lores on platforms that were, say... 3" to 6" tall? Maybe even slightly taller?
How do you feel they do as far as toe, and distance from rear wall? Distance from side walls?
Has anyone done any modifications of their Tektons, such as additional internal dampening or adding weight?
I'm willing to do a bit more in the room treatment area, but I think that the overwhelming majority of the "traps" and "diffuser panels" are god-awfully ugly, nevermind the absurd prices. Ideas there need to be aesthetically and acoustically beneficial.
 

Attachments

  • 20200403_110309.jpg
    20200403_110309.jpg
    65.2 KB · Views: 46
[bunch of stuff]
I'm no expert, but I've read that square rooms don't make the best listening rooms, and your room is nearly square. I'd say the best first step is to experiment with speaker placement. A lot.

Maybe even try this http://noaudiophile.com/speakercalc/

If there's another room that's not quite so close to a square that you can use for your listening room, I'd move your system to that room. But I'm guessing that's probably not an option.
 
I built stands for the Lore S so that the tweeter would point to my ears/ the speakers leaned back just a bit.
You might hang a carpet or something a few inches from the rear wall too. Tame the reflection's off the rear wall.
In our last place, I struggled with rear wall reflections until we finally moved (altho, thats not why).
 
I'm joining the Tekton club! Ordered a pair of Moabs in 8 ohm in charcoal grey. Should be here in 4 weeks. Eric is very busy. A good sign, people want his products. I currently have a pair of Thiel 2.3's that are 20 years old. Will be driving them with a Bryston 4bsst and a Woo Audio Wa5. Room is a little small at 16x11 but is well treated and is a dedicated room.
 
I'm joining the Tekton club! Ordered a pair of Moabs in 8 ohm in charcoal grey. Should be here in 4 weeks. Eric is very busy. A good sign, people want his products. I currently have a pair of Thiel 2.3's that are 20 years old. Will be driving them with a Bryston 4bsst and a Woo Audio Wa5. Room is a little small at 16x11 but is well treated and is a dedicated room.

Welcome to AK!
 
I'm joining the Tekton club! Ordered a pair of Moabs in 8 ohm in charcoal grey. Should be here in 4 weeks. Eric is very busy. A good sign, people want his products. I currently have a pair of Thiel 2.3's that are 20 years old. Will be driving them with a Bryston 4bsst and a Woo Audio Wa5. Room is a little small at 16x11 but is well treated and is a dedicated room.


you'll need to report back once you get those big bad boys...
Not too many of them out there yet.
 
Double Impact SE - anybody heard a pair?
I'm assuming the "upgraded" drivers are Seas drivers which are very nice.
Just not certain how audible the $1000 upcharge is.
I have not seen a professional review.
The SEs intrigue me which is dangerous.
 
Double Impact SE - anybody heard a pair?
I'm assuming the "upgraded" drivers are Seas drivers which are very nice.
Just not certain how audible the $1000 upcharge is.
I have not seen a professional review.
The SEs intrigue me which is dangerous.
I just bought these yesterday. Spoke to Eric briefly yesterday and he suggested that I buy the DI with the $300 upgrade. I chose to upgrade the drivers( do not know what the upgraded drivers areand the website has no details), but he did not say they sounded a lot better. Same applies to the BE upgrade. He said he does not have the time to elaborate on the BE upgrade, since there is a lot of discussions on the internet about the topic.
I am curious what people are using to drive these speakers. I am not sure I understand reviewers who say that these speakers love a lot of muscle. The sensitivity on these speakers(99dB 2.83V@1m sensitivity) are so high, so it should be easy to drive..right?
 
Last edited:
I just bought these too yesterday. Spoke to Eric briefly yesterday and he suggested buy the DI with the $300 upgrade. I chose to upgrade the drivers but he did not say they sounded a lot better. Same applies to the BE upgrade.
I am curious what people are using to drive these speakers. I am not sure I understand reviewers who say that these speakers love a lot of amp power, because the sensitivity on these speakers are so high.

Jit
Welcome to AK.
I have 2 pair of Tektons; Lore S & Impacts (not DI or Impact monitor). Both models I have are discontinued.
Regardless, they both sound fine with low power amps but are more powerful with higher watt SS power. So, if you listen to jazz combos, small ensembles or folk, they will sound great with lower power.
If you listen to large orchestral works, very dynamic music, or music with thumping bass, more watts are better.
I'm driving mine w a 150 watt Onkyo Integra amp & they sound wonderful.

Please post your impressions of the DI SE's.
The price differential between DI w upgrade ($3300) & DI SE ($4000) is not that great.
Do the SE have the upgraded caps, posts, etc?
 
6CE18E56-2B18-476D-B537-D40DF4723B10.jpeg 4B40E525-F622-4B6A-BEA4-A5944DBD7D23.jpeg
I just bought these too yesterday. Spoke to Eric briefly yesterday and he suggested buy the DI with the $300 upgrade. I chose to upgrade the drivers but he did not say they sounded a lot better. Same applies to the BE upgrade.
I am curious what people are using to drive these speakers. I am not sure I understand reviewers who say that these speakers love a lot of amp power, because the sensitivity on these speakers are so high.
I have the DI’s with the 300 dollar upgrade and a biwire hookup in the back. They are amazing!
 
I just bought these too yesterday. Spoke to Eric briefly yesterday and he suggested buy the DI with the $300 upgrade. I chose to upgrade the drivers but he did not say they sounded a lot better. Same applies to the BE upgrade.
I am curious what people are using to drive these speakers. I am not sure I understand reviewers who say that these speakers love a lot of amp power, because the sensitivity on these speakers are so high.

Eric said the $300 upgrade is a no-brainer- 9 out of 10 pairs he sells have the upgrade. It was an easy decision.
I don't think you need gobs of power to run them, but some say they open up at 200 WPC. I have 500 WPC and only go over 5 watts when no one is in the house, and at 10 watts I can't hear the wife yelling at me. They are reportedly not as efficient as advertised, but I dunno.
 
Eric said the $300 upgrade is a no-brainer- 9 out of 10 pairs he sells have the upgrade. It was an easy decision.
I don't think you need gobs of power to run them, but some say they open up at 200 WPC. I have 500 WPC and only go over 5 watts when no one is in the house, and at 10 watts I can't hear the wife yelling at me. They are reportedly not as efficient as advertised, but I dunno.

You'd need a cavern sized room to run 200 Watts thru them & not go deaf.
 
Hey! I just joined AK and have a new pair of Lore’s. I am pretty excited about them, and some more people to talk to about them! My wife is tired of hearing about them
Well, tell us more then! :-) what do you like about them? Are they as good as people say they are? I’m strongly considering getting the Lore References later this year.

How/why’d you pick the regular Lores over the Lore Reference or one of the slightly bigger Tektons?
 
Well, tell us more then! :) what do you like about them? Are they as good as people say they are? I’m strongly considering getting the Lore References later this year.

How/why’d you pick the regular Lores over the Lore Reference or one of the slightly bigger Tektons?
So far i love them. I was really surprised by the amount of detail. Also, if you do get a pair, be forewarned, they stink like paint, right out of the box. It goes away with some ventilation.

They have definitely shown me the weak points in my system. I went from sony core series bookshelves to the Lores, so it’s a huge change.

My room needs some treatment and i will be looking for an amp next. I am going settle in on this setup for awhile though.

I landed and on the Lores because i started looking to add subs to my setup, which is going to be two channel. As i looked at subs, I realized that I would be spending at least $600-$800 on one Hsu or one Tekton or two RSL speed woofers. That made spending $1k on the Lores make sense. More $ upfront, but less to spend in the future (on speakers)

So far, i am stoked, I love live music and these make it so you hear the music and the space it was played in, chill inducing... they are also great for movies and tv!
 
Back
Top Bottom