• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

Regarding the Double Impacts 4 way design, this would appear to be a departure from Eric's previous designs, which seemed to rely more on wide range drivers to cover the audio spectrum. From what Mac was describing, it would appear that the transition points were handled very smoothly through the multiple crossovers. Kudos to Eric for continuing to "push the envelope"!
 
Here you go dylster.......the double impacts in their setting. At least for now, I'm starting construction on a dedicated listening room next month.

It is amazing that Eric personally answers the phone all the time, I just hope he isn't biting off more than he can chew. Between designing new speakers, personally painting and assembling the speakers and taking care of orders and customer service he must be burning the midnight oil quite a bit. I don't know how he does it.

View attachment 813772
Thanks Mac...Thats SWEET looking.... im kinda wondering...with ur gear right in between those big 'muthas... no issues with feedback/vibration ?
 
Here you go dylster.......the double impacts in their setting. At least for now, I'm starting construction on a dedicated listening room next month.

It is amazing that Eric personally answers the phone all the time, I just hope he isn't biting off more than he can chew. Between designing new speakers, personally painting and assembling the speakers and taking care of orders and customer service he must be burning the midnight oil quite a bit. I don't know how he does it.

View attachment 813772
P.S...was on the Tekton site yesterday...read the review and knew it was you...cant wait to see the new dedicated listening room... happy Construction !
 
Noticed there was some utah members here that wanted to listen to a set, I'm based in Utah and would be willing to demo my pendragons. mostly directed @rickallen81

My set of pendragons is 4ohm so not sure how well it would work with your tube setup, but you're welcome to lug them over.

Currently debating whether to banish the pendragons to "rear" duty and getting a set of Double Impacts for the fronts. Decisions, decisions.
 
Noticed there was some utah members here that wanted to listen to a set, I'm based in Utah and would be willing to demo my pendragons. mostly directed @rickallen81

My set of pendragons is 4ohm so not sure how well it would work with your tube setup, but you're welcome to lug them over.

Currently debating whether to banish the pendragons to "rear" duty and getting a set of Double Impacts for the fronts. Decisions, decisions.

Now that would be awesome!
 
Thanks dylster. Obviously the worst location for the equipment is between the speakers but trying to incorporate an audio system into a family room consists of many compromises. I know my system could sound much better in a dedicated room built specifically for audio and I can't wait to move my system into one. Construction starts tomorrow!
 
Last edited:
Mgb, I don't know how Eric did it but he managed to come up with a seamless four way design that's even more efficient than his simpler two way designs. The Legacy Focus SE's impressed me with how seamless they were from top to bottom and was expecting the Double Impacts to be less so but find them equally seamless.
 
Just thought I'd share, finally received my matching Lore Reference center channel Eric built for me, came out really nice. Still has very low hours but what a drastic improvement over using a 'phantom center'! Dialogue sounds so natural and clear. Such a simple design but gets the job done so well. Kudos to Eric.


You probably want the tweeter centered, whether you go 90 degrees or not.
 
Mgb, I don't know how Eric did it but he managed to come up with a seamless four way design that's even more efficient than his simpler two way designs. The Legacy Focus SE's impressed me with how seamless they were from top to bottom and was expecting the Double Impacts to be less so but find them equally seamless.
Well, it sounds as though he has another winner on his hands! As soon as I find a buyer for my Maggies, I'll give Eric a call. Hopefully, the waiting list won't be too long as your pics have me stoked!
 
I have the privilege of living in Utah I drove down and met Eric two years ago and bought the pendragons he is a genius.
I have been into his shop where he creates his master peaces. I went down their a month ago and had him upgrade the crossovers on my pendragons and he had a pair of double impacts kinda of a orange color I was very impressed and they were not broken in. He played the 1812s for me they are very crisp and also could make your ears bleed. I picked up my pendragons and took them home my pendragons were the first pair with this crossover he put in them I came home and listened and I was floored they
were not the same speakers but I felt that I really wanted to get the double impacts. So I found a buyer for my pendragons and sold them. I went up their last week and dropped off a deposit for the double impacts and dropped my pendragon center for a upgrade,he is working on some great stuff. I am so excited to get the impacts and get my
center channel back with the crossover upgrades. Utah has a few company's that make high end audio Wilson audio also in Orem Utah and Kimber Cable in Ogden Utah. I think he is giving some of these audio giants a run for their money I have been in a few high and shops in the valley one had Mcintosh amps and pre-amps and 12k of transparent cables hooked up to it i do not want to mention the speakers 30k a pair so over 60k worth of electronics and I kid you not my pendragons sounded better. I have a rotel solid state amp 200 watts per chanel with 2 turoidel transformers a 80 pound monster with 12 conductor kimber they sounded amazing with a Marantz pre pro processor. I am very fascinated with tube amps the guy that bought my pendragons had a 200 watt 2 chanel conrad Johnson so amazing. I cannot wait to get the impacts and center with the upgrade thank you Eric for making our enjoyment and hobby so affordable. Another thing you might try is the DIY website on making you own power cords I bought the beldon cable 83803 and then bought the connectors on line I could not believe how it beat cords I had that were more than 500 dollars.
 
I have the privilege of living in Utah I drove down and met Eric two years ago and bought the pendragons he is a genius.
I have been into his shop where he creates his master peaces. I went down their a month ago and had him upgrade the crossovers on my pendragons and he had a pair of double impacts kinda of a orange color I was very impressed and they were not broken in. He played the 1812s for me they are very crisp and also could make your ears bleed. I picked up my pendragons and took them home my pendragons were the first pair with this crossover he put in them I came home and listened and I was floored they
were not the same speakers but I felt that I really wanted to get the double impacts. So I found a buyer for my pendragons and sold them. I went up their last week and dropped off a deposit for the double impacts and dropped my pendragon center for a upgrade,he is working on some great stuff. I am so excited to get the impacts and get my
center channel back with the crossover upgrades. Utah has a few company's that make high end audio Wilson audio also in Orem Utah and Kimber Cable in Ogden Utah. I think he is giving some of these audio giants a run for their money I have been in a few high and shops in the valley one had Mcintosh amps and pre-amps and 12k of transparent cables hooked up to it i do not want to mention the speakers 30k a pair so over 60k worth of electronics and I kid you not my pendragons sounded better. I have a rotel solid state amp 200 watts per chanel with 2 turoidel transformers a 80 pound monster with 12 conductor kimber they sounded amazing with a Marantz pre pro processor. I am very fascinated with tube amps the guy that bought my pendragons had a 200 watt 2 chanel conrad Johnson so amazing. I cannot wait to get the impacts and center with the upgrade thank you Eric for making our enjoyment and hobby so affordable. Another thing you might try is the DIY website on making you own power cords I bought the beldon cable 83803 and then bought the connectors on line I could not believe how it beat cords I had that were more than 500 dollars.
Hey Audioman... what model is your rotel ? On one of my systems I'm running a pair of rotel bx-980 "s in bridged mono mode that gives me 360/watts a side with about 80 amps of reserve current...when i crank em up the lights flicker...gotta run a dedicated 20 amp circuit....lol.....they are older but rock solid and sound lovely...def.wanna get back into the tubes also...looking forward to hearing your impressions when the Double Impacts arrive !
 
I have the RMB 1095 5 chanel silver front 200 watts per channel it is a awesome amp running xlr cables the wire-world silver eclipse and a great set of power cords I am not sure if you could bridge it. What would you recommend for a tube amp? Sounds like you have some really good gear. What kind of amp and and speakers are you running.
 
Hi Mac,

Just found this thread yesterday, after searching Google for Tekton Design links. I had been interested in a pair of Pendragons and will have to sell my Magnepan 3.6Rs before I can order them. This was the only option that would keep my wife happy with spending more money on audio stuff!!! However, after checking out your posts, I'm definitely going with the Double Impacts. Just what I was looking for, speakers that can give you that "live" feeling! Thanks for your posts!

Mark
I might have a friend willing to sell his pen-dragons I just sold mine with the new crossover upgrades I miss them I just ordered the Double impacts.
 
I might have a friend willing to sell his pen-dragons I just sold mine with the new crossover upgrades I miss them I just ordered the Double impacts.

Thx, Audioman! If I wasn't holding out for the Double Impacts myself, I would be very interested! Although, if he was selling them for a great price, I could change my mind! ;)
 
Thx, Audioman! If I wasn't holding out for the Double Impacts myself, I would be very interested! Although, if he was selling them for a great price, I could change my mind! ;)

mgb1985, what's a great price? I might be willing to part with mine.

Original boxes, Cherry Cola paint, Clarity Caps, 4ohm, internal silver wire, cardas silver plated posts. PM Me
 
I have the RMB 1095 5 chanel silver front 200 watts per channel it is a awesome amp running xlr cables the wire-world silver eclipse and a great set of power cords I am not sure if you could bridge it. What would you recommend for a tube amp? Sounds like you have some really good gear. What kind of amp and and speakers are you running.
Hi Audioman..Im def audio on a budget...my home theater setup is a denon 3808 ci receiver with klipsch synergy f3s on fronts ,ref.series rc 52 center rs52 surrounds and another pair of f3 towers for the backs...grunt work is done by a pair of matched sub 12s...I went through a klipsch phase 6 or 7 years ago...lol...for my dedicated two channel listening i have a vintage kenwood kr 9600 and a kenwood model 11 gx...old school beauty...but shes goin in for the recap/rebuild...also the twin rotel 980 bx and a rotel 960 preamp...speakers are old klh b2000 "s...old bears but they can still raise some dust..also some jbl northridge monitors...and a technics sl-5200 with a shure v15 type IV with a sas hyperelliptical stylus...the barn stereo is a yamaha 5890 receiver and a yamaha cd player with first gen klipsch cornwalls...its a big wide open area and those cornwalls need room to breathe...low end is a bic eviction series sub i got from a thriftshop......i have ten or twelve turntables in various stages of renovation,time permitting.... no tube stuff now tho at one point i had a nice old stromburg carlson tube amp, a dynaco 70 and a heathkit...kick my self in the ass for getting rid of that stuff...first wife said i had to much stuff...shoulda kept the gear and sent HER to goodwill.....lol...
 
I finally thought I was going to pull the trigger on Lores this month but then I read there have been pre-Black Friday sales so...I guess I'll wait a bit.

Meanwhile, I wanted to ask if someone can describe what is referred to as the "live sound" of Tekton?
What does that mean for a studio recording? Is it just referring to loud volume or a specific sound shaping? Hall Effect? PA system?

How is presentation in mids to upper register different than the many towers available at the $1k price point?
Specifically what type of listener do you think would not like the Lores that might prefer another speaker from Focal, Wharfdale, Elac, Kef, etc.
 
Back
Top Bottom