• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Tekton Owners Thread

Not sure crammit. I think I got the xli as it was class AB? I don't remember but I did get and bridged them to make two Monoblocks. It was a bummer as I thought I was onto something good that was very affordable. It's worth trying out since they have a money back guarantee......at least Music Direct did.

Yeah, that is a bummer. Appreciate you letting me know! Uh...

Hafler it is. ;) lol. (Audio humor.)
 
looking to buy double impact speaker my setup will be parasound halo amp will that be a good fit.

I'm driving a pair of Pendragons with a Parasound A31 and it's an awesome combination. I spoke with the owner of Parasound and he had positive comments when I told him what I was going to use. He confirmed that I'd be staying in class A most of the time given the efficiency of the speakers.
 
I'm still waiting to receive my D'Is, I'm getting really excited! When I get some time listening to them, I will write my thoughts, I'm sure I will be thrilled. I was wondering what speaker wires and cables you guys are using for your setup. I'm amazed the cost of these cables, read some opinions about not needing expensive cables and speaker wires, but still would like input.
 
Rick, check out Cerious Technologies for exceptionally good cables at very reasonable prices. Their speaker cables are amazing and only $649 for an 8' pair, $50 more per foot. I know of two guys that replaced speaker wire costing well in excess of $10k with these. Theyre the best speaker cables I've ever had. Their power cords are supposedly almost as good and I'll be ordering them soon. The interconnects are very good also, but I prefer either High Fidelity CT-1 ( pricey at $1600/1m) or Teo Game Changers ($500/m ). Good luck.
 
I'm still waiting to receive my D'Is, I'm getting really excited! When I get some time listening to them, I will write my thoughts, I'm sure I will be thrilled. I was wondering what speaker wires and cables you guys are using for your setup. I'm amazed the cost of these cables, read some opinions about not needing expensive cables and speaker wires, but still would like input.
Cables, power cords etc. are such a personal thing. Personally I can't hear the difference between expensive and cheap, assuming the cheap are well constructed. I've tried with speaker cables interconnects and power cables. I've sat with others and auditioned cables and I've been the only one who could not tell a difference in sound or lack of unwanted sound. However, people whose opinions I trust can hear differences. Likewise, others who I also trust, like me, can not. I won't say, I cant say, these things do not make a difference. I simply don't know. I will say, do not spend a lot of money until you decide for yourself and do not buy any cables without have an option to return them.
 
Someday I would like to do some A/B testing with some expensive speaker cables just to see if I can hear any difference between my home made Canare 4S11 cables and some ridiculously priced cables.
I have always felt that spending hundreds of dollars on cables was more for bragging rights than actual performance gains.
 
I pretty much agreed with you guys until getting the DI's. The DI's and my amp are so revealing I'm hearing definate improvements with the Cerious speaker cables over the WE and Duelund 16ga wire I was using along with the BJC and Kimber I used to use. The Cerious cable is perfect with the DI's as they have a relaxed way of displaying tons of detail and bring a whole new level of realism to my system. While I also liked my Belden 8402 interconnects the Cerious IC's revealed details I never heard with the Beldens. The High Fidelity IC's take things up yet another notch. I will say it took getting the DI's and building a dedicated sound room with diffusion and absorption treatments to hear the difference in cables. I never did before, so results will vary. My Duelund 16g was good at a cost of about $160 for a 12' pair bare wired and the Cerious are stellar at about $950 with spades for the same length.
 
Hi Guys,
So I have been doing my homework and preparing towards buying the DIs and looked into Arcam SR250, 2 channel A/V receiver. it's a pricey option but It is going to do everything I need it to do and probably sound better than any other multi-channel receiver out there, any thoughts on this option? it has a class G amplifier which technically I don't know much about but seems like a more efficient option compared to a class AB.
Thanks,
 
Cables, power cords etc. are such a personal thing. Personally I can't hear the difference between expensive and cheap, assuming the cheap are well constructed. I've tried with speaker cables interconnects and power cables. I've sat with others and auditioned cables and I've been the only one who could not tell a difference in sound or lack of unwanted sound. However, people whose opinions I trust can hear differences. Likewise, others who I also trust, like me, can not. I won't say, I cant say, these things do not make a difference. I simply don't know. I will say, do not spend a lot of money until you decide for yourself and do not buy any cables without have an option to return them.

I asked Eric Alexander for a speaker cable recommendation when I received my Pendragons and he recommended 14 Gauge Mogami Coax and he referred me to someone at Performance Audio in Salt Lake City. Should cost around $100 for an 8 foot pair.
 
Last edited:
Any Tekton owners have any experience with the Parasound Halo 5 Preamp? Still looking for a good preamp to go with my Odessey Khatago amp and DI's. I would like to go tube preamp, but just so expensive
 
new to site looking to buy floor standing speaker.my room size is12x17.looking at double impact or pendragon speaker.my setup will be parasound halo and oppo bdp-83 with a turntable.music taste of music is classic rock and rock music.
 
Any Tekton owners have any experience with the Parasound Halo 5 Preamp? Still looking for a good preamp to go with my Odessey Khatago amp and DI's. I would like to go tube preamp, but just so expensive
Hi Rickmusicman,

When I was looking for a SS preamp to drive a pair of Emotiva XPA-1L Gen2 monoblocks for my DIs, I wanted a very low noise floor preamp, as an alternate to my tube preamps that did not work well with the high efficiency of the DIs (probably due to defective tubes). I was considering either the Emotiva XSP-1 or the Parasound Halo P5. There is a long thread on the avsforums site where a guy compared both, side by side. It took him several weeks to make a decision, but he finally went with the Parasound. He felt both were excellent, but he preferred the slight emphasis on bass and richness of the Parasound over the detail and analysis of the Emotiva. For my system, I chose the Emotiva, primarily for the extra functionality of the processor loop and fully balanced analog path to pair with the Emotiva amps that are also fully balanced. By the way, in my home theater system, I have a pair of Odyssey Stratos Extreme monoblocks for the LR channels fronted by a Nuforce MCP-18 8 channel preamp. Love Odyssey Audio products and I just ordered replacement tubes for my Odyssey Candela preamp! Hopefully, that will fix the noise issue. Good luck with your choices!

Mark
 
Last edited:
new to site looking to buy floor standing speaker.my room size is12x17.looking at double impact or pendragon speaker.my setup will be parasound halo and oppo bdp-83 with a turntable.music taste of music is classic rock and rock music.
Hi Chuck Mac,

Looks like we have similar musical preferences! The DIs work great for all types of music, but they can also kick butt with rock!!! As they say, "there's no replacement for displacement" and those dual 10" drivers were designed for live venues, so they can also play loud! Have fun! :)

Mark
 
Long time lurker. Just ordered the Electron with upgrades and grills today. FWIW, Eric said the sonic signatures are spot on between the Electron and the DI, and at louder volumes, you can't tell the difference (he went on to say even more than that, but I'll just say he is extremely proud of the speaker). I currently have the Zu Omen MKii, which i like, but hoping to kick things up a notch (or several). Likely a week before shipping, but happy to post updates once I get them in.

For anyone looking, he has 2 prototype pairs of the Electron for sale as is on the site. One for $1400, one for $2000. Not sure how "off" they are from the final, but I wanted the upgrades and there is no upgrading the ptypes.
 
I pretty much agreed with you guys until getting the DI's. The DI's and my amp are so revealing I'm hearing definate improvements with the Cerious speaker cables over the WE and Duelund 16ga wire I was using along with the BJC and Kimber I used to use. The Cerious cable is perfect with the DI's as they have a relaxed way of displaying tons of detail and bring a whole new level of realism to my system. While I also liked my Belden 8402 interconnects the Cerious IC's revealed details I never heard with the Beldens. The High Fidelity IC's take things up yet another notch. I will say it took getting the DI's and building a dedicated sound room with diffusion and absorption treatments to hear the difference in cables. I never did before, so results will vary. My Duelund 16g was good at a cost of about $160 for a 12' pair bare wired and the Cerious are stellar at about $950 with spades for the same length.
Now that my home theater is finally done my next step is upgrading to Pendragons for my R/L.
Maybe then I will invest in some high end cables and do my own A/B testing and see if I can actually hear any difference.
Cardas Audio just happened to move to the little Oregon coast town of Bandon where we vacation for 2 weeks every September so I just might stop in and see them.
 
I have a pair of Pendragons. Sound is usually pretty good and it goes really low. The problem with mine is that you can't play them at reference levels for very long or else the tweeters melt. I've melted 5 so far and had to buy replacements from Madisound.

Eric at Tekton actually refunded my purchase price and told me to keep the speakers. I'll wait for the next tweeter to burn up then I'll get something different.
 
Back
Top Bottom