• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

The X-202-B. What an amp!

Carbsandcaps

Super Member
I recently bought myself a Christmas present TO REPLACE MY x-100-b. A fisher x-202-b in fantastic shape, no tubes but I had a set of 7591’s from a lowery DSO-1 (don’t murder me please).

I decided a full rebuild was in order. I ordered my Russian pio caps, smaller value caps were replaced with film. I did the 100ohm screen resistor addition and the 330ohm to 220ohm grid resistor and .1uf coupling caps. Installed individual 10 ohm cathode resistors for easier bias adjustments. The jewels were missing from the front so I decide to make a custom LED setup.

After some hickups I finally got it up and running and all I can say is WOW! It sounds absolutely incredible. The highs are high. The lows are low. I can hear things in songs I’ve never heard before. The phase reverse is a game changer. It has way more power than it has a right to I don’t see turning it past 50%. I would highly recommend if you’re thinking about buying one! IMG_0142.jpegIMG_0091.jpegIMG_0075.jpegIMG_9885.jpeg
 
Register to hide this ad
The amp has a non-switchable sub-sonic filter, and a non-switchable turntable rumble filter (not to be confused with the one on a switch).
So...I use a separate phono pre-amp, plugged into the tape monitor. This input is not filtered for rumble.
Better bass.
My Pioneer CS-99A practically walk across the room.
And the Fisher has great imaging on top of that.
Enjoy the amp.
 
Back
Top Bottom