• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Underrated Kenwoods?

We're safe from the Pioneer, and Marantz crowd

I think this is very true. I have a guy that is always bringing me Marantz gear to fix (receivers, amps, integrated amps). I don't think he is impressed with my set up. I'm ok with that.
 
That's because back then we didn't know about the unfathomable depths to which quality would plummet in the following decades. In the 70's every component that cost over $200 was considered good quality but the same gear nowadays would be considered not just good quality but downright premium and/or high-end. They sound the part like Kenwod's silky sound sig. If Pioneer was king then Kenny was pope lol. To Pioneer's credit tho was their "silverface" aka the 50 series initially launched in '76 a good 2 years before its competitors.
Well said. My almost entry level Sony turntable in 1977 was likely as good or better as any turntable that can be had now for under $1000.

Loved those Pioneer SXx50 series receivers.
 
Well said. My almost entry level Sony turntable in 1977 was likely as good or better as any turntable that can be had now for under $1000.

Very likely indeed.

Loved those Pioneer SXx50 series receivers.

So do I, I have a "little" SX-650 and it weighs 31 lbs. I restored it with a kit I had ordered direct from Pioneer in Japan. They keep those parts forever. Interesting factoid about the 650. Although it had been rated 35wpc (the most powerful 35 watter I ever heard lol )by Pioneer it was actually pushing 46 clean wpc. which was dangerously close to the SX-750's 50wpc.

Pioneer underrated the 650 to avoid having it compete with the 750 which sold for $100.more.They knew that few customers would want to pay an extra benjamin for a measly 4-watt gain. Both weigh about the same, a dead giveaway. Soundwise those two were identical, at least to my ear. They were both very "Pioneerian" as in clean and very clear, to the point of being slightly on the bright side at high volume especially with a "West Coast" sounding speaker like JBL

Kenwood has a more laid-back sound.that suits me better, me pushing 60 likes laid-back a lot. But when I was 14 in '77 I dreamed of girls... who would be listening to my SX-1250 because, of course, I would have one someday. Wishful thinking as it turned out, I never went above the more modest 650
 
Wow I really like that.

To me it seems weird that Kenwood could be remotely considered underrated as I do not remember that from back in the day. I remember them being very good.

My neighbor was a technician at Tech HiFi and could have anything at home and he had Kenwood's as did others who had concern for play back. I remember Pioneers being more like Chevy's and not better.

I was only like 14 at the time and also the Paper Boy so would go in the house once in a while and see what was new, he had set up.
 
To me it seems weird that Kenwood could be remotely considered underrated[...]

As a brand it is not underrated, the thread is about certain Kenwood models that for some reason didn't meet with the same commercial success as the mainline series. As for the most part choosing Kenwood over Pioneer was more of a preference for a sound signature than anything else. Practically any Japanese make that was sold in the US was of similar good quality be they Sansui, Onkyo, Technics (Panasonic), Kenwood, Sony, Pioneer, etc. Due to its lofty spot as the top seller Pioneer was often used as a basis for comparison but it was not considered any better or worse than the others from a strictly technical POV.

Pioneer is mostly known for two key events in home audio history: the SX-1010 and the 50 series. The SX-1010 was the first receiver rated at 100wpc RMS and as such marked the start of the "monster receiver war" that stretched into the early 80's with units boasting almost 300wpc, an insane amount of power for home use. As for the 50 series, in 1976 Pioneer introduced the SX-650 which on paper looked quite mundane but its all-aluminum front end including the dial gave it a distinct appearance that won it the nickname "Silverface" and it changed the way home audio gear would look like until the "Dark Age".
 
I've always had a warm spot in my heart for Kenwood Amateur Radio gear. I still have a TS-790 and a TS-950SDX. Even in Ham Radio circles Kenwood is renown for it's smooth, lifelike audio on transmit, and an equally smooth, low distorion on receive, which makes it easy to listen to for hours.

I have Pioneer stuff right now, but I'm learning about Kenwood stuff now, and I'll have to expand the fleet a git when I decide which Kenwood I want.
 
I've always had a warm spot in my heart for Kenwood Amateur Radio gear. I still have a TS-790 and a TS-950SDX. Even in Ham Radio circles Kenwood is renown for it's smooth, lifelike audio on transmit, and an equally smooth, low distorion on receive, which makes it easy to listen to for hours.
When folks talk tuners here on ak I comment on Trio's Ham Radio experience and their gear being some of if not the best. If they can get those bands and others for the rest of the gear they make right, getting the FM band right should be easy for them.

This is the first I've seen discussed the sound quality of their transmit/receive radio equipment as all I've done is stereo. My first tuner was a nice KT-7000 and a decade later while selling gear spent a night listening to the other salesman and the Kenwood rep talk all sorts of radios and antenna. I nodded a lot but couldn't add much to that conversation.
 
When folks talk tuners here on ak I comment on Trio's Ham Radio experience and their gear being some of if not the best. If they can get those bands and others for the rest of the gear they make right, getting the FM band right should be easy for them.

This is the first I've seen discussed the sound quality of their transmit/receive radio equipment as all I've done is stereo. My first tuner was a nice KT-7000 and a decade later while selling gear spent a night listening to the other salesman and the Kenwood rep talk all sorts of radios and antenna. I nodded a lot but couldn't add much to that conversation.


It's very good "Amateur Radio" audio considering how narrow a bandwidth with use for SSB. They have all their filtering spot-on for lifelike voice communication, and their RF circuitry is very linear. Their low-distortion receive audio makes it easy to listen for hours without tiring amounts of hiss and harsh frequency response. I haven't looked at any schematics of their tuners, so I'll have to head over to the HiFiEngine and get some service manuals to read.
 
My first real stereo system was built around a Kenwood KR-5400. I've always loved the look of Kenwoods, as well as their sound -- and I actually prefer the handsome appearance of many Kenwoods (and Sansuis and Pioneers) to the more in-demand Marantzes (whose pretty faces are certainly nothing to sneeze at).

Today, I have a number of 1960s-1970s Kenwood receivers and integrated amps, including:
KA-7100
KA-9100
KA-405
TK-40
KR-5600
KR-6400
Model Eleven

Can anyone tell me about some other Kenwoods of this vintage that you think are worth looking into -- maybe favorite units of yours that tend to fly under the radar?
I love this little amplifier ka-6150 I bought it of ebay for around 300 bucks cleaned it up and installed a red led. Sweet sounding little amplifier 50 wpc . Basically the 6100 but the European model so I suppose the ka-6100 would be great as well .
 

Attachments

  • 20220411_094708.jpg
    20220411_094708.jpg
    59.4 KB · Views: 55
This is an older thread, but I have to agree with the inaugural post ... the L0XY series is largely passed over —or just underrated. Perhaps there were not so many units sold. Monoblocs are rather a niche market. Most vintage audio folks may have never heard of them. I have the Japanese version: the Trio L05M. They run on 100VAC 50/60 Hz.

These mono amps are built like trucks! They are not perfect, but in a world where nothing is, they do everything very competently. With a compatible preamp, they will never tire you. With the wrong one ... YMMV. :))) In my experience, for what it's worth, it's difficult to get something for everything. My Sansui had a richness; my Pioneer A-717 has the wham; an Dynaco ST-70 had the image and presence. But what about an amp that gives you something, but not all of these things? That is an achievement. And let's not forget that these amps are over 40 years old. Yes, I've worked on them, but I'm never going to get rid of them for just the reason I have made. Overall competency!

I've had these for a l-o-n-g time. I bought them here in Japan from HiFiDo. The CEO sold them to me personally. He was candid and said they were rather bright. And they were. But I discovered that with a compatible preamp, they are tamed very nicely. That has nothing to do with being vanilla!

Other stuff comes and goes, dies or whatever. These pieces keep going steady, strong and stable. I recapped these guys and did other stuff using the service manual — which was very clear to electronics moron like me.

I just checked the DC offset for the first time since I worked on them in 2010 — original output transistors:

L: mV5
R: mV

In my opinion, vintage Kenwood / Trio takes no second place among the foremost audio engineering houses.
 
This is an older thread, but I have to agree with the inaugural post ... the L0XY series is largely passed over —or just underrated. Perhaps there were not so many units sold. Monoblocs are rather a niche market. Most vintage audio folks may have never heard of them. I have the Japanese version: the Trio L05M. They run on 100VAC 50/60 Hz.

These mono amps are built like trucks! They are not perfect, but in a world where nothing is, they do everything very competently. With a compatible preamp, they will never tire you. With the wrong one ... YMMV. :))) In my experience, for what it's worth, it's difficult to get something for everything. My Sansui had a richness; my Pioneer A-717 has the wham; an Dynaco ST-70 had the image and presence. But what about an amp that gives you something, but not all of these things? That is an achievement. And let's not forget that these amps are over 40 years old. Yes, I've worked on them, but I'm never going to get rid of them for just the reason I have made. Overall competency!

I've had these for a l-o-n-g time. I bought them here in Japan from HiFiDo. The CEO sold them to me personally. He was candid and said they were rather bright. And they were. But I discovered that with a compatible preamp, they are tamed very nicely. That has nothing to do with being vanilla!

Other stuff comes and goes, dies or whatever. These pieces keep going steady, strong and stable. I recapped these guys and did other stuff using the service manual — which was very clear to electronics moron like me.

I just checked the DC offset for the first time since I worked on them in 2010 — original output transistors:

L: mV5
R: mV

In my opinion, vintage Kenwood / Trio takes no second place among the foremost audio engineering houses.
I grew up listening to my dads KD-5070 hooked to his KR-6030. Other threads here I just read have comments such as ‘boxes of air’ etc. I own Sansui, Marantz, Akai, dbx BX3, Yamaha M80’s & Kenwood separate amps & receivers. Kenwood pieces sound as good as the others. Which is an opinion, my opinion. All create a slightly or greatly different type of sound. And some will have better internal layouts & components than others. Before the mass production affliction took hold, Kenwood’s amps and especially certain receivers moved air very well.
 
You can also argue that Kenwood made the top best tuners
Agreed. weren’t they known for 4 gang early on?
anyway, the experience i had as a youth listening to dads receiver was great. I lived in central Jersey and I could pick up both WPLJ & WMMR from the City crystal clear. As well as stations from Philly.
 
You can also argue that Kenwood made the top best tuners
Not an argument, they did and there is a reason for it.

Trio/Kenwood is still a major player in the amateur radio business and has been for decades, it is how they started after WWII. Doing all those frequencies makes getting the AM and FM bands right a project for the new engineers. Their L-02T is one of the best according the FMTunerInfo site. Their receivers are generally very good at AM and FM.

https://rigreference.com/manufacturers/kenwood some of their other receivers, transceivers and such.

@drjim did you check out some of the tuner schematics? Comments?
 
Last edited:
My first real stereo system was built around a Kenwood KR-5400. I've always loved the look of Kenwoods, as well as their sound -- and I actually prefer the handsome appearance of many Kenwoods (and Sansuis and Pioneers) to the more in-demand Marantzes (whose pretty faces are certainly nothing to sneeze at).

Today, I have a number of 1960s-1970s Kenwood receivers and integrated amps, including:
KA-7100
KA-9100
KA-405
TK-40
KR-5600
KR-6400
Model Eleven

Can anyone tell me about some other Kenwoods of this vintage that you think are worth looking into -- maybe favorite units of yours that tend to fly under the radar?
Sure, the Kenwood KR-6030. Nice unit, easy to work on for the most part. 80 watts per channel mine works well, can't put above 2 on the volume or the neighbors complain. When they do I hit the loudness lever.
 
Back
Top Bottom