• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

W70's are 4 way with a 12 inch woofer
Rosedales are 3 way with 15 inch woofer


Art

Well, the W70D is the 4-way version and has a 12" woofer. The W70, W70B, and W70C are 3-ways with a 12" woofer. The W70E/Rosedale is a 3-way with a 15" woofer. There were five different versions of the W70 (The W70 and W70B are both ported, the original W70 being all-alnico... I believe the W70C is sealed and has a ceramic Super 3 tweeter... The W70D is the first with that purple mylar tweeter, and there was a MkI and a MkII, the most-noticeable difference being the look of the purple tweeter... The MkI has that uncovered tweeter while the MkII has that black diffusor thing over it... Both are visually-different from the W70E tweeter, which has the black diffusor on the front, covering everything but the center dome... The W70D MkI and MkII tweeters show more of that purple mylar material than the W70E does... And there are likely some slight quality differences between the W70D and W70E tweeters, based on marketing philosophy changes introduced by Rank for the W*0E series).
 
Last edited:
I have found it interesting that the components available on the back cover, especially the Super 3 and the full range drivers are not the same as those used in the D series. Also, the purple tweeter and mid-ranges weren't offered as components, at least in that catalog.

For those interested in the page, see http://stereo.toups.info/
(note the pages in the catalogs enlarge if clicked on)

I imagine they offered the Super 3 for that long (ceramic version at that point) for repair & DIY purposes (repair of earlier models where a driver failed or was damaged), and they probably didn't list the purple tweeter in the catalog because they wanted to persuade people to buy new ones rather than building their own, and DIY'ers might have done the latter with the newer tweeters/drivers if they were openly-advertised in the catalog like that (And with Briggs on the sidelines by that point, the Rank Group execs were probably looking to take the company in a less-DIY-friendly direction, an idea Briggs would surely have opposed, being the big DIY supporter that he was all those years).

Speaking of DIY, I have seen that alnico W15RS used in several projects on YouTube and elsewhere. I bet that is one VERY-nice driver. I have a pair, but I haven't implemented them yet. Probably super-smooth and capable of accurate bass extension well-into the 30hz range in the right application. According to Hi-Fi/Stereo Review, the dual 3-way W90 with two 12's (of the alnico RS/DD variety) remained clean down to just below 40hz (Doubling occurring at 35hz), so I have to think that the W15RS should be capable of even more depth, especially in that massive 9 cubic ft bass enclosure they put them in with that omni-directional corner model (I have a pair of those in DIY form, built to spec internally with the sandwich construction on the front AND rear panels... It will be very-interesting to hear those in action with the alnico 15's and the alnico Super 8 and Super 3 drivers on top, free-air-mounted and upfiring, but that project is down the road a bit... Should be a trip though, that sweet sound of those mids and highs PLUS the extra extension).

I've been enjoying my W90's so much this month. And for the past week or so, I've been on a Lalo Schifrin kick (He's most-famous for his movie & TV soundtrack work of the '60's and early '70's... Lots of horns and strings and funky guitar and drum rhythms... Sounds fantastic through the W90's, which really do an amazing job with music like that... Great with the low horns and low strings, like a baritone sax or trombone, or a bowed string bass or cello... W90's really nail the sound and weight of instruments like that). Like you said, they have an engaging quality to them, more so than most speaker brands, past and present. You just want to keep listening to them all day/night long. When you get them into that sweet spot range where the woofer volume has caught up with the volume of the mids and tweeters, the sound really smoothes out, and that's where the real magic happens. ALL the old Wharfie models are like that.
 
Last edited:
Throughout my audio hobby I have been lucky to have really good speakers to anchor my system with:

E-V Aristocrats
Wharfedale W70D
KLH Nine
Bozak 302a
Bozak Symphony
Wharfedale W70

In that order. I also have had over the decades many sets of sets of JansZen speakers. More of his designs than any other designer's, including Rudy. I still have a set of his best hybrid designs, the Z412HP that need new caps and used ro own his best, the Z824HP, a truly amazing speaker in every say.

I also had a goodly number of other speakers. What I realized in thinking about my most favorige systems, I owned the KLHs longest owned but then it hit me I owned and divorced myself from Wharfedales for some 40+ years, I ended up going back to them without thinking about this. It was not that they were a bargain or, I was even speaker shopping; in fact for some 6-months before I had run across some great speakers at bargain price.

Today, I am a might shocked that I still prefer the same speaker that I liked so much and owned for several years as a kid and the common denominators associated with them such as the designer. Sadly, none of these greats are alive so, I need to maintain what I have such as the W70s. Hopefully all of you will also and think about any commonality or common denominator.
 
Last edited:
Throughout my audio hobby I have been lucky to have really good speakers to anchor my system with:

E-V Aristocrats
Wharfedale W70D
KLH Nine
Bozak 302a
Bozak Symphony
Wharfedale W70

In that order. I also have had over the decades many sets of sets of JansZen speakers. More of his designs than any other designer's, including Rudy. I still have a set of his best hybrid designs, the Z412HP that need new caps and used ro own his best, the Z824HP, a truly amazing speaker in every say.

I also had a goodly number of other speakers. What I realized in thinking about my most favorige systems, I owned the KLHs longest owned but then it hit me I owned and divorced myself from Wharfedales for some 40+ years, I ended up going back to them without thinking about this. It was not that they were a bargain or, I was even speaker shopping; in fact for some 6-months before I had run across some great speakers at bargain price.

Today, I am a might shocked that I still prefer the same speaker that I liked so much and owned for several years as a kid and the common denominators associated with them such as the designer. Sadly, none of these greats are alive so, I need to maintain what I have such as the W70s. Hopefully all of you will also and think about any commonality or common denominator.

How do the JansZens compare to KLH's 'stat sound and performance, or the sound and performance of the Quad ESL for that matter?

What has struck me the most about the early Wharfedale W*0 models is how accurate-sounding they can be, given the proper support. My W90's slowly got better and better until every little bump and dip in the frequency response had been polished away, and on top of that, the complexity improved dramatically. It got to a point where it was like, "Jeez, I knew they were good, but damn...". They respond really-well to quality gear.
 
Here is the finished crossover in a 1962 w90 .

I left the original capacitors in place as a reference .

The new caps are Russian . The big green ones are PETP and the smaller ones attached in parallel as a bypass are paper in oil.

Originals were 24 ohm and 6 ohm, both 50 volt.
The new ones are within 5% and volts are 250 on the PETP and 200 on the bypass pio.

I hope this is another example that might help future w90 owners.

Correction; A closer read of the lettering on the capacitor shows it is actually 8 ohms, like the brochure and everyone elses here show.
 

Attachments

  • DSC02501.jpg
    DSC02501.jpg
    48.7 KB · Views: 48
  • DSC02502.jpg
    DSC02502.jpg
    55.6 KB · Views: 50
  • DSC02504.jpg
    DSC02504.jpg
    54.8 KB · Views: 54
Last edited:
Here is the finished crossover in a 1962 w90 .

I left the original capacitors in place as a reference .

The new caps are Russian . The big green ones are PETP and the smaller ones attached in parallel as a bypass are paper in oil.

Originals were 24 ohm and 6 ohm, both 50 volt.
The new ones are within 5% and volts are 250 on the PETP and 200 on the bypass pio.

I hope this is another example that might help future w90 owners.

SIX ohms for the tweeter caps? Boy, that's weird. Mine are eight ohms, which is the same as what the brochure page said for the all-alnico, non-rear-vented version like mine.

The autotransformer thingy in yours looks a little different/nicer than the one in mine. Here's a shot of my crossover just before I put in the oil caps.
picture.php


Getting some time with mine today. Not sure how long it'll be until the neighbors get home, but it's fun right now. Damn them and their addictive qualities.
 
Last edited:
My Newly aquired W90D's

Need a lot of work and haven't opened them up yet, but owner assured me all drivers worked before he put them in storage. They were free so didn't feel the need to check right away.

Wood needs refurb to remove all the crap and water stains on top, and one of the them got attacked by cats and both by mud dauber's.

As soon as I move into the new house will start with a complete restore.

IMG_20150430_160414_zpszbdhwvgt.jpg
[/URL][/IMG]

IMG_20150430_160649_zps3rjbdxvi.jpg
[/URL][/IMG]

IMG_20150430_160641_zpsjdfsvw6j.jpg
[/URL][/IMG]
 
Look behind the grime, and you have some nice woodwork there.
Go with mild soap and water to remove dirt without scratching. Let dry.
Then, for the tops, if those are white water marks take an old cotton t shirt, drain all water from a clothes iron, and put the iron on LOWEST setting, lay the cotton on the wood and iron the cloth, and the white marks may go away.
DO NOT USE MUCH HEAT,
Apply iron a little at a time until you are sure of results.
Low heat so you don't lift veneer.
You could try the bottom first if you want to be safe.
If you have black water marks, ironing won't work.
I have heard oxalic acid takes black water marks out, but that means bleaching the wood, and possibly restaining.
See this link for what it can do. http://www.thomaspenrose.com/diy_stains01.htm
BarKeepers Friend has oxalic in it, and if you make a paste with water and rub it in, stains go away. Rinse and Repeat till all gone.

Nice trim on those . I see a metal trim piece dead centre in the face, and both badges.
What is happening with the grill...is that stain or missing pieces?

I'd say good luck but you already have it at free. Those are nice.
 
Last edited:
Look behind the grime, and you have some nice woodwork there.
Go with mild soap and water to remove dirt without scratching. Let dry.
Then, for the tops, if those are white water marks take an old cotton t shirt, drain all water from a clothes iron, and put the iron on LOWEST setting, lay the cotton on the wood and iron the cloth, and the white marks may go away.
DO NOT USE MUCH HEAT,
Apply iron a little at a time until you are sure of results.
Low heat so you don't lift veneer.
You could try the bottom first if you want to be safe.
If you have black water marks, ironing won't work.
I have heard oxalic acid takes black water marks out, but that means bleaching the wood, and possibly restaining.
See this link for what it can do. http://www.thomaspenrose.com/diy_stains01.htm
BarKeepers Friend has oxalic in it, and if you make a paste with water and rub it in, stains go away. Rinse and Repeat till all gone.

Nice trim on those . I see a metal trim piece dead centre in the face, and both badges.
What is happening with the grill...is that stain or missing pieces?

I'd say good luck but you already have it at free. Those are nice.

Thanks for the info! I'm hoping simple soap and water will go a long way before I have to go to the more extreme measures, we'll see.

The splotches/stains are left over dirt after removing the mud dauber nests that were attached (These are everywhere in Texas). He said these were in a storage shed for several years before he decided to part with them. Im going to run the grills just themselves under a faucet to see if I can remove as much as possible, but will probably end up reupholstering them anyway. The dirt on the wood should just wipe off with a wet rag.
 
Last edited:
Missing parts for my Whafedale W70d markII.

I have a pair of W70D mark II speakers. They are missing one crossover, two Tweeters and two Lower mids. I have the upper mids, and the woofers, as well as the cardboard tube and the packing. Do any of you old timer whafedale re-finishers refurbishers have those parts? At a reasonable price? Or maybe I will just sell off what I have....

mike...
mikestp@yahoo.com
 
Anyone who wants a pair of W90 and lives near South Holland Illinois, take a look at the ebay auction for a pair of back vented beauties. No affiliation, its a charity auctioning them.
They look in nice shape. 1 day left.
 
I have a pair of W70D mark II speakers. They are missing one crossover, two Tweeters and two Lower mids. I have the upper mids, and the woofers, as well as the cardboard tube and the packing. Do any of you old timer whafedale re-finishers refurbishers have those parts? At a reasonable price? Or maybe I will just sell off what I have....

mike...
mikestp@yahoo.com

I would keep watching Fleabay for the drivers, though you may get lucky here, but don't give up on those. The W70D is one of Wharfedale's best models. Throw some tubes at them and get the placement dialed in, and you'll have some very-serious speakers there. Their large W*0 models are no joke when given the proper attention.
 
Thanks for the info! I'm hoping simple soap and water will go a long way before I have to go to the more extreme measures, we'll see.

The splotches/stains are left over dirt after removing the mud dauber nests that were attached (These are everywhere in Texas). He said these were in a storage shed for several years before he decided to part with them. Im going to run the grills just themselves under a faucet to see if I can remove as much as possible, but will probably end up reupholstering them anyway. The dirt on the wood should just wipe off with a wet rag.

Give those some nice tube power of the vintage type, and you will SO love those. If the tweeters aren't high enough to put the tweeters at eye-level (ear-level), just raise them a bit. And make sure the placement distances are right. Some VERY-nice speakers there if given the chance. And very-tweakable. You can really tune the response with those midwoofer and tweeter level controls on the back. You want more bass, just dial the mids and tweets back equally just a bit. Want less bass? Just raise both a bit. Want a smoother sound with a little less grit? Just dial back the midwoofers just a hair so they are just a bit lower than the tweeters (In other words, so the mids are less-aggressive).
 
Last edited:
Give those some nice tube power of the vintage type, and you will SO love those. If the tweeters aren't high enough to put the tweeters at eye-level (ear-level), just raise them a bit. And make sure the placement distances are right. Some VERY-nice speakers there if given the chance. And very-tweakable. You can really tune the response with those midwoofer and tweeter level controls on the back. You want more bass, just dial the mids and tweets back equally just a bit. Want less bass? Just raise both a bit. Want a smoother sound with a little less grit? Just dial back the midwoofers just a hair so they are just a bit lower than the tweeters (In other words, so the mids are less-aggressive).

Yeah cant wait to play around with these, the only thing I'm worried about is finding the oil cap replacements..
 
I will keep looking.....

I would keep watching Fleabay for the drivers, though you may get lucky here, but don't give up on those. The W70D is one of Wharfedale's best models. Throw some tubes at them and get the placement dialed in, and you'll have some very-serious speakers there. Their large W*0 models are no joke when given the proper attention.

I don't know if I am asking the right questions regarding the lower midrange speaker. One of the cabinets I have needs a bit of work to fix but until I can get the components I will wait to fix the cabinet. These are a 4 way set of speakers. I am missing both the tweeters and the lower midrange. Plus one cross over. So is it proper to label my larger midrange speaker as a larger midrange?

I would like to use them (the W70d mark 2s) as my main front speakers and use my E70s as the rear speakers with a pair of Mach 5s as the centre channel. All tied up to my 6.1 amp from Luxman.

Not a particularly fantastic system but enough to satisfy my needs, as well as the listening and movie entertainment for my guests.
 
I don't know if I am asking the right questions regarding the lower midrange speaker. One of the cabinets I have needs a bit of work to fix but until I can get the components I will wait to fix the cabinet. These are a 4 way set of speakers. I am missing both the tweeters and the lower midrange. Plus one cross over. So is it proper to label my larger midrange speaker as a larger midrange?

I would like to use them (the W70d mark 2s) as my main front speakers and use my E70s as the rear speakers with a pair of Mach 5s as the centre channel. All tied up to my 6.1 amp from Luxman.

Not a particularly fantastic system but enough to satisfy my needs, as well as the listening and movie entertainment for my guests.

How are those E70's and Machs with the Luxman? Vintage Wharfedales in general are known to improve quite a bit when you throw higher-quality amplification at them, but the W*0 models seem to crave a tubier sound, though they too will reward quality gear. A fellow AK'er recently mentioned about his W90's sounding flat-out amazing with a Marantz 8b. I haven't tried any Luxman gear with my W90's yet, so I really can't say, but I think you'll be okay if that amp jives well with your other Wharfedales. I just wonder about sensitivity. Won't that affect the W70D's playing nice with the others in a surround setup? Or can you adjust the levels between the mains, centers, and rears with it?
 
Luxman 5.1 amp

The RV371 Luxman allows for adjustment of centre and rear separately from the front. The Luxman amps I have had in the past (LV105) was a tube based amp, but Luxman do not make a tube based 5.1 amp so I had to get a SS amp. But it does play well and it is a marked improvement over the Yamaha amp I had borrowed till i got this... The 105 I sold for a lot more than I paid for the 371 Lux.

I do like the Wharfedale speakers. Thats why I have 5 pairs of em..... I have a pair of W70d mark 2s and a pair of W70's, and a pair of E70's as well as a weird pair of W50's (the W50's are very close in style and age to the E70's and nothing at all like the other older W series). The Mach5's are simply a left over pair from the early 80's I had kicking about. They are just the right size to lay on their sides and support the TV set.... And of course much better than any other centre speaker I have heard.

Of course for listening to music I have a choice of having the stereo play through the fronts, the rears, or a simulated surround that uses all the speakers. I usually listen to music through the front pair.

Until I get the missing drivers for my W70d Mach2's I have the E70's as the fronts, the W50's as the rears and the mach5's as the centres. The older pair of W70's are in the closet.

Mike...
 
The RV371 Luxman allows for adjustment of centre and rear separately from the front. The Luxman amps I have had in the past (LV105) was a tube based amp, but Luxman do not make a tube based 5.1 amp so I had to get a SS amp. But it does play well and it is a marked improvement over the Yamaha amp I had borrowed till i got this... The 105 I sold for a lot more than I paid for the 371 Lux.

I do like the Wharfedale speakers. Thats why I have 5 pairs of em..... I have a pair of W70d mark 2s and a pair of W70's, and a pair of E70's as well as a weird pair of W50's (the W50's are very close in style and age to the E70's and nothing at all like the other older W series). The Mach5's are simply a left over pair from the early 80's I had kicking about. They are just the right size to lay on their sides and support the TV set.... And of course much better than any other centre speaker I have heard.

Of course for listening to music I have a choice of having the stereo play through the fronts, the rears, or a simulated surround that uses all the speakers. I usually listen to music through the front pair.

Until I get the missing drivers for my W70d Mach2's I have the E70's as the fronts, the W50's as the rears and the mach5's as the centres. The older pair of W70's are in the closet.

Mike...

One day I'll get a pair of the E*0's. Someday. They definitely have their own niche carved out. Different than the W*0 sound though. Those early W70's would sweet through a nice, old tube rig. I'm a two-channel guy at heart. I actually like using them for movies, but with the two-channel audio track selected. My W90's sound awesome with action films like the "Fast & The Furious" box set. But of course, they're dependent on that tube-type sound to really-shine, so the typical high-quality 5.1/7.1 amp just wouldn't work.

Yeah, it's odd. The W50 that I know (the OLD W50) is a rarity. It followed the W60 months later (from what I've seen) and couldn't have been around for more than a year or so, two at best. I've never seen a pair. Smaller than the W60 but bigger than the W40, obviously. Probably just pulled for simple marketing reasons, as in, they didn't want it pulling sales away from the W60. Who knows.
 
Last edited:
luxman amps....

I found that with all the Luxman stuff I have owned, you would have to spend at least double what you would have spent on the Luxman gear to surpass them. I have heard 3000-4000 dollar amp systems that did not sound as nice in the stereo world as my cheapo LV-105. And my RV371 is pretty nice as well, especially considering I paid 200 for it. When new I think it was 2000 in 1993. It has a few more bells and whistles to play with. A sorta super stereo where you can hear a stereo recording in all 5 speakers. I don't use it to listen to stereo recordings but it took up a few hours of time playing with it.... lol. :D

So far the only thing I have found wrong with it is the tuner selections. Probably due to gummed up selectors. I will try and spray some magic de-gunker spray to see if I can get them working, but I can manually tune it to one station and really... That's all I need... (before I had just a LV-105 with no tuner. So no big deal. lol) :D

I found the Luxman RV-371 in stereo mode was sounding as nice as I remember the LV-105 tube amp. But they were both attached to the Wharfedales so in my opinion the speakers are more important to the sound than the amp system. Also I think my personal settings affect the conditions of the stereo sound I like... I usually have the bass at mid point And the treble at full tilt, as I love to hear the subtle triangle castanets, xylophone, and various instruments that get drowned out with the bass ... I have no subwhoofer as I feel the Warfes can take care of all the bass I need.

I could hear the difference between both of my Luxman amps and the Yamaha 5.1 amp. But even the lowly Yamaha sounded nice with the Wharfedales. Reinforcing my theory regarding speakers as more important than the amps.

:music: Mike...
 
Last edited:
Back
Top Bottom