• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

I recently added a pair of one previous owner W70's & origional stands (drove 3.5 hours x2 for them) and cleaned them up. I have a HH Scott 299A being recapped currently. I may recap the the W70's or or jump to Cornwalls. I will decide when I get the 299 back. Any advice on recapping , which PIO to look for (source, brand, value) or just general advice on W70's with low watt tube integrated is greatly appreciated.

I would also like to ask if you have best luck running your W70's off 4 o 8 ohm taps ?

Thank you.

 
Last edited:
I recently added a pair of one previous owner W70's & origional stands (drove 3.5 hours x2 for them) and cleaned them up. I have a HH Scott 299A being recapped currently. I may recap the the W70's or or jump to Cornwalls. I will decide when I get the 299 back. Any advice on recapping , which PIO to look for (source, brand, value) or just general advice on W70's with low watt tube integrated is greatly appreciated.

I would also like to ask if you have best luck running your W70's off 4 o 8 ohm taps ?

Thank you.


Cool stands! And congrats on the sweet w70’s! I’ve spent some time with Cornwall’s and I think they are the polar opposite of w70’s/w90’s in most ways. We all hear differently so you need to hear them both if possible and decide which ones do it for you. Either will be efficient enough to be driven nicely by your 299.

To answer my own post a little I did look back in this thread at what @Gang-Twanger & @Crestwood23 used for PIO caps and found this post...
http://audiokarma.org/forums/index.php?threads/wharfedale-owners-thread.543491/page-7#post-7823013

Yep there’s good info there - I’m listening to my W90’s with KGB oil caps right now and they are still going strong.
 
Cool stands! And congrats on the sweet w70’s! I’ve spent some time with Cornwall’s and I think they are the polar opposite of w70’s/w90’s in most ways. We all hear differently so you need to hear them both if possible and decide which ones do it for you. Either will be efficient enough to be driven nicely by your 299.



Yep there’s good info there - I’m listening to my W90’s with KGB oil caps right now and they are still going strong.

Boy you got that right, I have my living room set up,with Four Cornwalls, pushing one set with David Berning Tube amp and pre,-'d the second unit is a Quicksilver Intigrated tube amp, into a second set of corns. They simply rock, and roll, classical and jazz are heavenly via both stereo units. My kitchen stereo speakers are one set of 70s and one set of 90s. 90s,the stereo is an ad/s, amp and pre amp SS, wonderful music comes across in a very satisfactory level.

two very different animals. Both lovely, awesome. Both shine with most tube stereo systems. The ad/s SS unit is also nice, different but sounds great.
Got four 90s and four 70s, so I'm always messing with mixing and matching. I will be going back to all 90s, or all 70s. Soon.

Enjoy.

Dirk
 
Hi, my name is Braulio, I'm from Chile.

I have a beautyfull pair of Wharfedale Rosedale, i need change old xover's capacitors.

Values of capacitors are 6uf and 25uf, I want to buy Jantzen Superior-Z caps.

Jantzen caps are good to my Rosedales???

Regards
 
Anyone using W70's on there sides ? I have seen a few posts around mentioning it and curious for thoughts.

*EDIT: Tried this and although it was different I certainly preferred the W70 standing up vertically as they were designed**
 
Last edited:
My W70's needed about 30 hours to open up and get rid of the creekyness in the cabinets and drivers. Probably from the caps and drivers sitting un-used for some time. FYI
 
I have read a lot in this forum about the subject, many people recommend using the old Russian capacitors. But I believe that modern Jantzen should be a superior improvement.
 
Last edited:
I also think that by changing the coils the improvement should be remarkable. But I have no idea what the values of the coils are, nor do I have any idea how to measure them.
 
Interesting idea, W-70s on their sides. I've got Cornwalls sitting sideways, on another upright set of Corns, in my living room they sound really really good.

My kitchen set up is a set of W90s, with a set of W-70s, on top. Standing just shy of six ft tall, collectively.

I've had folks whom I,consider knowledgable suggest I flip the 70s, upside down, for better speaker alignment, which kinda makes sense to me.

Some day, I may just do that. When it's summer here, my stereo gear isn't my priority. To much going on outside. I generally fiddle with my stereo gear in the winter, when is freezing outside.

Dirk
 
Hello Everyone,

I have a pair of Wharfedale melton 2's in new condition. I bought them when on a bit of a nostalgia trip having heard this when I was a kid. They are completely original with the factory brown speaker grilles and emblems. The veneer cabinets look near pristine and the drivers and tweeters look great. The crossovers have also been serviced with mundorf caps.

I will post up some pics at some point.

David
 
I also think that by changing the coils the improvement should be remarkable. But I have no idea what the values of the coils are, nor do I have any idea how to measure them.

I'm pretty sure I have the same crossover in my W70E's - I'm a bit of a purist and would leave the coils to keep speakers as original as possible. I doubt that you would be able to hear any appreciable difference in sound quality anyway.
 
I also think that by changing the coils the improvement should be remarkable. But I have no idea what the values of the coils are, nor do I have any idea how to measure them.
BTW all the coils on my crossover were clearly marked and I made a schematic drawing since no one has any documentation on these speakers. I will be posting as soon as I have time.
 
Melton 2's - trip down memory lane.

hx09A8C.jpg


QIYyNgG.jpg
 
I'm pretty sure I have the same crossover in my W70E's - I'm a bit of a purist and would leave the coils to keep speakers as original as possible. I doubt that you would be able to hear any appreciable difference in sound quality anyway.

Hello, my idea is that by replacing the components of the crossover with modern components the improvement should be remarkable ... I have some jbl lancer 101, which I put them in jantzen standar caps, the improvement was incredible.

With respect to the change of coils, I have a friend who also has some jbl lancer 101, and he replaced the original coils with made-to-measure ones .. the improvement was very good too ..

So my idea is basically to try to get the best possible performance of the components of my Rosedales.
 
BTW all the coils on my crossover were clearly marked and I made a schematic drawing since no one has any documentation on these speakers. I will be posting as soon as I have time.

Hello again, when I uncovered my Rosedales I noticed that the crossover coils were only wrapped in a colored ribbon, but there are no values anywhere.

Could you show me a picture of the crossover of your W70-E?

Could you tell me the values of the coils?

Could you show me your schematic drawing?

Thank you very much
 
Back
Top Bottom