• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Wharfedale Owners Thread

just picked them up.....gave it a quick test run with Grateful Dead Europe 72....sounds good to me so far.

As a complete newbie with this, not sure where to go from here but step 1 is trying to clean these grills. They don't appear to come out (easily), so hopefully I can gently scrub out the stains.
 

Attachments

  • wharf1.jpg
    wharf1.jpg
    35.5 KB · Views: 30
  • wharf2.jpg
    wharf2.jpg
    37.6 KB · Views: 27
  • wharf3.jpg
    wharf3.jpg
    48.7 KB · Views: 27
  • wharf4.jpg
    wharf4.jpg
    49.8 KB · Views: 27
  • wharf5.jpg
    wharf5.jpg
    56 KB · Views: 28
just picked them up.....gave it a quick test run with Grateful Dead Europe 72....sounds good to me so far.

As a complete newbie with this, not sure where to go from here but step 1 is trying to clean these grills. They don't appear to come out (easily), so hopefully I can gently scrub out the stains.
If it were me I'd rent a furniture steamer that uses steam plus vacuum to suck up the vapor and dirt as it goes. I would dismount speakers first.
 
If it were me I'd rent a furniture steamer that uses steam plus vacuum to suck up the vapor and dirt as it goes. I would dismount speakers first.

I have a clothing steamer, but it doesn't have the vacuum function. Guess I can follow the steamer with a small handheld vac
 
I have a clothing steamer, but it doesn't have the vacuum function. Guess I can follow the steamer with a small handheld vac
That may not work. The professional machines mix surfactants into the water/steam to desolve the dirt. Try using a cleaning solution in a spray bottle such as Fantastic 409 or the non-chlorine version of clorox spray cleaner. Then go over it again using a sponge with plain water to remove the soapy residue.
 
  • Like
Reactions: BMC
That may not work. The professional machines mix surfactants into the water/steam to desolve the dirt. Try using a cleaning solution in a spray bottle such as Fantastic 409 or the non-chlorine version of clorox spray cleaner. Then go over it again using a sponge with plain water to remove the soapy residue.
Makes sense, thanks

Picked a small section and started with my steamer first, then applied a foam upholstery cleaned and rubbed gently. Minimal results, but after it dried.....it did look somewhat better. Going to try this method on all affected areas next. I suspect this will be the first of many cleanings before I see some real progress.

Really wish I could just remove and replace easily
 
From the looks of it (and many other posts from owners), it seems these weren't designed for an easy grille detachment. Here is the inner cabinet with the speakers removed. Those small wood blocked are glued and nailed it. I guess I could try and remove, but I fear causing more damage. Going to try the steamer + foam cleaner a few more times and see how it pans out...
 
It would be cheaper and the results more satisfactory is you just replaced the dirty worn grill cloth. It is cheap to do.

This outfit has similar styles of weaves. The best place to learn how to replace the grill cloth is to go to Youtube to watch artists making their own canvases the process is exactly the same. You need a pair of canvas pliers. and an upholstery stapler.

Whoops wrong tab on the website let’s try this again.

https://reverb.com/shop/stringtrader
 
Last edited:
pic below
Note the space between the speaker panels that should be filled with sand. It is difficult to tell from the photo if the sand filling is still there. It is very important it is replaced if missing the speaker will not sound right without it. Go down to a local lumber company and purchase a bag of sand. This can be found at Lowe’s 50 pounds for $5.30.

C01D255F-0918-4689-8A92-527B3024843F.jpeg
 
It would be cheaper and the results more satisfactory is you just replaced the dirty worn grill cloth. It is cheap to do.

This outfit has similar styles of weaves. The best place to learn how to replace the grill cloth is to go to Youtube to watch artists making their own canvases the process is exactly the same. You need a pair of canvas pliers. and an upholstery stapler.
https://www.atsacoustics.com/Guilfo...372bJ9B6310oNvyvgqhUn94vIPlWdXZ8aAha5EALw_wcB
I'm not sure I would want to use fabric that is designed specifically for sound absorbing acoustic panels. One thing you have to be mindful of is how much high end will be filtered out by the fabric. If I owned these I would try to keep these as original by salvaging the existing speaker cloth if it's not torn.
 
I'm not sure I would want to use fabric that is designed specifically for sound absorbing acoustic panels. One thing you have to be mindful of is how much high end will be filtered out by the fabric. If I owned these I would try to keep these as original by salvaging the existing speaker cloth if it's not torn.

yeah, and not to mention....the potential damage to the cabinets as they don't look too easy, especially for a very amateur "woodworker" like myself.

But, I assume if I managed to remove the 10 wood blocks, that would free the front grille allowing for a simple re-fabric with a proper cloth. But I'm going to give the steam + clean a few more attempts over the weekend as to try and salvage the original cloth
 
I have had fairly good successes with an upholstery cleaner. I figured I had nothing to lose. Go down to the Auto parts store and look for something like this.
483259A1-A1B7-4D06-B902-80A186D7CF62.jpeg
 
So, here's the final outcome......ended up from taking it completely apart. A few coats of Howard's Restore N Finish (a few more to go) and new fabric for the grills. Had to remove rear wood trim for removal and just ended up replacing it all with new 1" trim. All in all....not bad for my first project.

wharffinal.jpg

Lessons learned -
1. If you have ODC or strive for perfection, don't bother trying to clean the stains off of 50+ year old fabric. It will never look good enough. Through a combination of foaming carpet Woolite, Blue Genie, and some elbow grease....I was able to remove a lot of the dirt & grime, but in the end....not good enough
2. Be careful removing 50+ year old particle board. Both grills broke upon removal, so I had to glue them back together before putting the new fabric on
 
These don't match any of the pictures on google. Did they redesign the Diamond 8.1 significantly? They are better looking. What is the build quality like? Most importantly, how do these sound, and what does your user manual give them for specifications? Thanks!
This is technically the 13th generation of Diamonds obviously the 8.1's are the 8th gen which I have owned since 2001. After the 8th gen you had the 9.1(gen 9) 10.1 (gen 10) 121 (gen 11) 220 (gen 12) and now these gen 13, gen 10 we didn't get in North America. All the generations sound similar but they all have their unique twist, these actually sound the most similar to the 8.1 which I feel is the most lively of the bunch up until the 11.1, and the 8 series tweeter was rolled off on the topend the 9.1s was to but barely and it had a much better tweeter than the 8.1. These 11.1 are much more extended from top to bottom than the 8.1, the box is much bigger of course, but they have that musical magic like the 8.1..that ebb flow so to speak, with the multi-layer cabinet, foam woofer surrounds and killer tweeter being miles ahead of the 8.1....
 
This is technically the 13th generation of Diamonds obviously the 8.1's are the 8th gen which I have owned since 2001. After the 8th gen you had the 9.1(gen 9) 10.1 (gen 10) 121 (gen 11) 220 (gen 12) and now these gen 13, gen 10 we didn't get in North America. All the generations sound similar but they all have their unique twist, these actually sound the most similar to the 8.1 which I feel is the most lively of the bunch up until the 11.1, and the 8 series tweeter was rolled off on the topend the 9.1s was to but barely and it had a much better tweeter than the 8.1. These 11.1 are much more extended from top to bottom than the 8.1, the box is much bigger of course, but they have that musical magic like the 8.1..that ebb flow so to speak, with the multi-layer cabinet, foam woofer surrounds and killer tweeter being miles ahead of the 8.1....
Somehow I thought these were the 8.1 - now I clearly see the 11.1 on the packaging and I have to admit they look beautiful.
 
Back
Top Bottom