Wriley
New Member
I recently purchased a set of Dynaco A10s. Set everything up and all was good—sounded great. I decided to plug my turntable into the AC Outlet on the back of my Pioneer SX-880 receiver to free up the wall outlet. I didn't turn off the receiver before doing this. Made a godawful sound and before I could shut things off, one of the speakers dropped out. The other seems to have survived whatever happened, but now i have one speaker that sounds like this.
https://drive.google.com/open?id=1xsjGuyR8mkC1P9SLJXRCTIBRRZOc2zyU
I switched to a backup receiver to rule that out. Tweeter seems OK, but the woofer is mostly just a scratchy noise. A search around the web leads me to believer that I may have blown the voice coil but since that seems to be the worst case scenario I figured I'd throw it out here and see if someone smarter than me could give me hope. Or do I go ahead and set up that eBay alert for "A10 driver"...
https://drive.google.com/open?id=1xsjGuyR8mkC1P9SLJXRCTIBRRZOc2zyU
I switched to a backup receiver to rule that out. Tweeter seems OK, but the woofer is mostly just a scratchy noise. A search around the web leads me to believer that I may have blown the voice coil but since that seems to be the worst case scenario I figured I'd throw it out here and see if someone smarter than me could give me hope. Or do I go ahead and set up that eBay alert for "A10 driver"...

