• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

What Do We Have Here?

I love a mystery. All those bright blue can caps... That seems like a lot of capacitance for a preamp, no?
 
amps in speaker cabinets is not impossible. A power cord and a switch would be the tell.

I had the original powered Large Advent Speakers. I wanted to take the amps out and make acrylic covers for them but someone wanted the speakers and paid for freight to Washington State. Never saw another pair

With regard to your question

Mirko Paneyko (http://www.nytimes.com/1986/11/11/obituaries/mirko-paneyko-head-of-audio-corporation.html)

It says the company, then known as M-P Audio Corp., was founded in 1936 and manufactured custom sound systems.

The 7/11/60 issue of Billboard magazine also lists M-P as a phonograph manufacturer
 
This is a BYOA deal.
There are no amps in the speakers. However, the speakers are very interesting in themselves:
Each box is 16 cubic feet, housing (4) B-199A 12" woofers, (2) B209 Mid-range, (1) cluster of (8) b-200X tweeters, (2) N-103 crosovers, (1) super tweeter and a 3rd crossover for the super.
2015-12-08 21.59.26.jpg 2015-12-08 22.01.19.jpg 2015-12-08 22.01.54.jpg 2015-12-08 22.02.41.jpg 2015-12-08 22.02.56.jpg 2015-12-08 22.03.21.jpg 2015-12-08 22.05.20.jpg 2015-12-08 22.06.31.jpg 2015-12-05 14.49.39.jpg
 
Sorry for my lame suggestion but...

Maybe you can "find" the missing amplifier by tracing the wires from the speaker themselves?

If the wires from the speakers go to a connector on the back of the cabinet, it's just a "speaker box" with no amps. in it.

There may be a "missing" piece that houses the power amplifiers (this system seems to be built in "sections).

Mark T. :music:
 
Apparently this system was custom built by MP ENGINEERING CO. with distinctive high quality fabricated power supply & preamp / amp modules,

not to mention the sweet & neat R.T. BOZAK cabinets, Very interesting at that. Very nice, Cheers & Enjoy………………………................................
 
not to mention the sweet & neat R.T. BOZAK cabinets, Very interesting at that. Very nice, Cheers & Enjoy……

The Bozaks are very sweet & neet in deed!
I plan to enjoy them this weekend by hitching them onto either my converted Fisher 440a console amp or maybe I'll try my $5.00 estate-find SWTP 207/A s.
Then I can pull those preamps & power supplies and start warming them up.
 
Kasanay, where did you get this setup? I had an architect in Westerly RI who had a friend with this identical (as I can remember) combo.

These are a set of lowboy B310A Concert Grands with a pair of aftermarket supertweeters added. I can't remember if the cabs were custom made, or factory.
 
Last edited:
That tweeter should be a Foster/Radio Shack supertweeter, IIRC. The gentleman did not care for the original Jensen RP 302s. If the amps are tucked in the speakers, expect a pair of McIntosh MC60s or Acrosounds with little fans behind a mesh.
 
BTW, since Bozak manufactred these drivers in Dec. 1962, they should be B-200Y tweeters and B209A midranges. You'll need to deal with the dried-out foam dampening rings on the B209As. You have some truly excellent speakers there. Shine a light through the grille cloth - if the tweeters are satin black without silver dustcaps, they're B-200Ys. If the cones are flat black and they have silver dustcaps, they're B-200Xs.

The lowboy Concert Grand was the B-400. I don't think they made a B-400A variant, but these would be a custom interpretation of that design.

It looks like preamps were tethered to the amps with XLR cables. Damned unusual for 1962 home stereo gear.
 
Last edited:
where did you get this setup?
I picked these up outside of Detroit, MI. 5 years earlier, they were removed from the original owner's home, located in Grosse Point, MI.
It's interesting to here that there were other installation like this. I have read about similar installations. I think the folks at MP Engineering (or MP Audio Corp.) may have done several of these high-end, custom installs.

That tweeter should be a Foster/Radio Shack supertweeter, IIRC. The gentleman did not care for the original Jensen RP 302s. If the amps are tucked in the speakers, expect a pair of McIntosh MC60s or Acrosounds with little fans behind a mesh.
I haven't pulled the super tweeter out yet, but I will. There are no amps in the speakers. I don't think there ever were any. I think the amps were in a 2nd console cabinet or possibly in a remote location.

Thanks for the information.
 
It looks like preamps were tethered to the amps with XLR cables. Damned unusual for 1962 home stereo gear.
Sam, Those "XLR" jacks are may not be connection to the power amp but rather to a remote tone control box.2015-12-06 21.00.28.jpg 2015-12-06 21.00.40.jpg
Thanks, for the great info. I'll be checking those dust caps later today.
 
With the help of my brother, I was able strip all the components of of the console, dim-bulb-test each one up line voltage and then started connecting things together.IMG_0099.JPG IMG_0104.JPG IMG_0106.JPG IMG_0108.JPG IMG_0114.JPG IMG_0119.JPG IMG_0125.JPG IMG_0127.JPG IMG_0163.JPG
EVERYTHING WORKS!
Ok, everything also needs work. But, it was very exciting to be able to power these all up. We plugged the preamps into the Fisher 440A console amp that I am converting to a stand-alone and then hooked up the Bozaks. Pretty sweet!
 
I was able strip all the components of of the console,
dim-bulb-test each one up line voltage and then started connecting things together. EVERYTHING WORKS!

Ok, everything also needs work. But, it was very exciting to be able to power these all up. We plugged the
preamps into the Fisher 440A console amp that I am converting to a stand-alone and then hooked up the Bozaks. Pretty sweet!

Very nice photo presentation on how things are comming along.................
 
Back
Top Bottom