Winter fire place
- Thread starter WildWest
- Start date
Register to hide this ad
WW
That sure looks like an inviting glow; just the thing when you come in from shovelling snow.
Wait a minute! You're in Tucson???????
Well, you can snuggle up to it when you have the air turned off and are watching us Arctic boys digging out from under 12" of white stuff.
That sure looks like an inviting glow; just the thing when you come in from shovelling snow.
Wait a minute! You're in Tucson???????
Well, you can snuggle up to it when you have the air turned off and are watching us Arctic boys digging out from under 12" of white stuff.
oldmarantz
Well-Known Member
Hey WW you ve got a really big electric Heater
the weather must be cold in your area...cold but good
Dom.
the weather must be cold in your area...cold but good
Dom.
radioactive
tube gear fanatic
ww,
thats one cool stand(the equiptments nice too)
is it homemade or bought.ive been looking for ideas for a stereo stand beside the traditional ones.how high is it.
if its bought wher'd you get it?
how much?
radioactive
thats one cool stand(the equiptments nice too)
is it homemade or bought.ive been looking for ideas for a stereo stand beside the traditional ones.how high is it.
if its bought wher'd you get it?
how much?
radioactive
MikE
Color Me Gone
DIY Rack
And a damn fine one at that. Here's the link> http://audiokarma.org/forums/showthread.php?s=&threadid=4927&highlight=rack MikE
And a damn fine one at that. Here's the link> http://audiokarma.org/forums/showthread.php?s=&threadid=4927&highlight=rack MikE
WildWest
Super Member
Thanks Radioactive...
Yup, I wanted something a bit more untraditional so this came outta my head. It's 82" inches high and 12" between shelves. That gave me enough room for cooling and stacking. If you have the place to build it why, it ain't so hard to do. Well, manhandling the 4' x 8' sheets of 1" MDF was a bit tricky and a table top band saw is handy for the round cuts.
Yup, I wanted something a bit more untraditional so this came outta my head. It's 82" inches high and 12" between shelves. That gave me enough room for cooling and stacking. If you have the place to build it why, it ain't so hard to do. Well, manhandling the 4' x 8' sheets of 1" MDF was a bit tricky and a table top band saw is handy for the round cuts.
radioactive
tube gear fanatic
re system rack
hi ,ww
your right that mdf is pretty heavy stuff.i have a set of homemade spekear cabs made out of 1'mdf and their pretty heavy.
i was thinking of doing something similar to yuor setup but using stainless tubing or aluminum.my brother works for a welding company and i could probally get the tubing at cost.while a little more expensive than the threaded rod ,i wouldnt have the cost of chrome plating them.im still looking around for ideas and another shelf that looks cool is the one on berners mcintosh site.om sure theres others but yours and his have been the only ones ive seen so far.more searching is needed but im sure ill come up with something.thanks for the input...
radioactive
hi ,ww
your right that mdf is pretty heavy stuff.i have a set of homemade spekear cabs made out of 1'mdf and their pretty heavy.
i was thinking of doing something similar to yuor setup but using stainless tubing or aluminum.my brother works for a welding company and i could probally get the tubing at cost.while a little more expensive than the threaded rod ,i wouldnt have the cost of chrome plating them.im still looking around for ideas and another shelf that looks cool is the one on berners mcintosh site.om sure theres others but yours and his have been the only ones ive seen so far.more searching is needed but im sure ill come up with something.thanks for the input...
radioactive
