• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Yamaha CR-1020 Case Measurements

M

Marc44

New Member
Hey folks,

I was just wondering if one of your number could do me a favour and measure their original Yamaha CR-1020 case from the front edge that butts up against the faceplate to the front edge of the top grill?

I have my receiver out for reconditioning a few hours away and forgot to take that measurement.

I want to have a cabinet maker build a new dark walnut case with a light maple inlay at exactly the halfway point between the faceplate and grill.

Thank you to anyone who can help me out with this.

Marc :)
 
Register to hide this ad
Welcome Marc,
I took these two pictures of my CR-1020 cabinet. The measurement from the back side of the cabinet to the grating is a more reliable measurement at about 1-5/8".
Since I have done previous repair work on the front edges of my cabinet, you should probably subtract about 3/16" from the reading in the photo, which is just under 3.5". This would make the measurement from the base area of the faceplate to the grating at approximately 3 - 1/4".
Hope this helps.

Archie
 

Attachments

  • 20230925_145145 (002).jpg
    20230925_145145 (002).jpg
    90.5 KB · Views: 3
  • 20230925_150702 (002).jpg
    20230925_150702 (002).jpg
    97.7 KB · Views: 3
You must log in or register to reply here.
Back
Top Bottom