• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

case

  1. D

    Fisher 500-s Wood Case?

    I would like to find a wood case for my Fisher 500s. Does anyone know what the model number was for this case? Is it compatible in size to cases for other Fisher receivers? Does anyone currently make new ones? Thanks!
  2. M

    Yamaha CR-1020 Case Measurements

    Hey folks, I was just wondering if one of your number could do me a favour and measure their original Yamaha CR-1020 case from the front edge that butts up against the faceplate to the front edge of the top grill? I have my receiver out for reconditioning a few hours away and forgot to take...
  3. FireGuruMN

    Wood Receiver Cases/Cabinets-How I Built a Few

    Here are the steps I took to build these wood cases: After exhaustive searches of the interweb I found only one relatively complete guide on how to build nice wooden cases for vintage (or modern) audio receivers. And now I can't even find that one anymore. So in case there are other fools out...
  4. Sylph

    Voltage on the chassis of an AU-919

    I am calling out to anyone that can help me on this one as I am stumped. I've had this amp for roughly 8 years now and is still considered my favorite piece thus far. The amp was serviced myself, full recap job, adjustments, cleaning, etc. After 8 years, the amp has suddenly developped voltage...
  5. K

    Marantz WC-10?

    I recently purchased what was supposed to be a WC-10 for my Marantz 4060 but it’s measurements were significantly off. Correct me if I’m wrong but a WC-10 should measure as such: FACEPLATE 14 1/4 " X 4 3/4 " EXTERIOR 15 5/6 " Width X 5 15/16 " Height X 12 " Depth The case I received measures...
  6. Bburdette

    Pioneer SX-650 Damaged Corner.. Repairable?

    Hi, I purchase a really nice Pioneer SX-650. It is in excellent working condition and the case was in very good condition with sharp corners, minor peeling and scratches. When it arrived it had shipping damage to the lower front right corner, It is banged up pretty bad. Now the whole unit...
  7. mstewart

    Restoring some old Pioneer cases

    I have a SX-440 where the coating on it looks completely dry and worn out. I'm wondering if I could just sand that down and put some stain or clear coat on it. If so what should I use? I also have a SX-626 that's sort of rough. Only the problem is more that its chipped. Is it possible to strip...
  8. bre's dad

    WC-22 case height

    Good morning. I am building a new stand and have ordered a WC-22 case for my 2270. My question is what is the height of the case (specs weren't in the ebay listing) so I can make sure to have enough clearance on top for cooling.
  9. Mike Sweeney

    Veenering this and that

    So here is a question to those that have worked on restoring Marantz cases. I have two.. one came with a 2226B and one came with a 2285B. Both are OEM and were sold with the case. In the 2285B case, it does not have the metal shield at all and the screw holes for it were never used ( still has...
  10. DL Jones

    Marantz 22xx wood case WC-22 WC-22B

    I've seen a few threads with folks asking about cases for their 22xx model Marantz receivers. I had a saved search on eBay and almost all the true vintage cases I saw had issues - chips to the veneer, water damage, sagging screens, etc. I ended up buying a repro case for my 2270 that turned...
  11. Marantz 150 Tuner with Solid Figured Cherry Case

    Marantz 150 Tuner with Solid Figured Cherry Case

    Marantz 150 Tuner with Solid Figured Cherry Case. Very clean tuner, near mint with my solid hardwood case.
  12. Punker's Marantz 2110

    Punker's Marantz 2110

Back
Top Bottom