Yamaha YP-D6 is it worth it?

[Mr. Disco]

Here is a picture of a Yamaha YP-D6 for sale, it's supposed to be mint with owners manual, asking price $300.
Is it worth it?

 

[Metalownz]

$300.00 may be a bit high, but that is one hell of a turntable right there. I have one, and it was one of my favorites. Try to talk him down to at least $150.00. However, that example looks almost brand new.

 

[nickrobotron]

I had a "brand new" looking D6. Fantastic table, but it's not a $300 table. $200 at most. And that means it should come with a good working cartridge, IMO.

 

[nickrobotron]

I sold mine on BT for $180 with a brand new Grado Green.

 

[wushuliu]

Here is a picture of a Yamaha YP-D6 for sale, it's supposed to be mint with owners manual, asking price $300.
Is it worth it?View attachment 487688

The D-6 was higher up in the chain but not TOTL IIRC.

If it is actually mint as in the grading term then I'd say yes. Mint means basically new. The seller probably means very good maybe even excellent, but near mint/mint I'm skeptical. Sellers throw those words around a lot without thinking about the actual reference meaning and tables tend to look much better in picture than up close where the smudges and scratches then show themselves.

If in 'excellent' condition I'd say get them to knock off a few bucks. This assuming everything works as it should, testing, etc.

 

[jnoyes]

The D-6 was higher up in the chain but not TOTL IIRC.

If it is actually mint as in the grading term then I'd say yes. Mint means basically new. The seller probably means very good maybe even excellent, but near mint/mint I'm skeptical. Sellers throw those words around a lot without thinking about the actual reference meaning and tables tend to look much better in picture than up close where the smudges and scratches then show themselves.

If in 'excellent' condition I'd say get them to knock off a few bucks. This assuming everything works as it should, testing, etc.

I agree! I would offer $250, if it's in the condition as stated. I might go to $300 if it's really mint with a decent cartridge and usable stylus. Keep in mind that any used stylus may need to be replaced.

Jon

 

[mythless]

Some of the issues I've come across with the Yamaha's direct drive TTs, except for manuals, is the cracking of the gears for both auto-return and lead in. So that is one issue to be vigilant in if you are serious buyer.

 

[hypertone]

I wouldn't pay more than $50 for one. I had one and it was decent, but you can do way better for $300.

 

[jnoyes]

I wouldn't pay more than $50 for one. I had one and it was decent, but you can do way better for $300.

Such as?

Jon

 

[Mr. Disco]

That sexy looking YP-D6 in near mint condition is sold, so obviously someone was willing to pay $300 for it. Which just reinforces my stance that vintage tt's are not only harder to come by but also $$$. Maybe it's because I live in Canada, maybe there aren't as many out there as there are say in the U.S. market. Damn!

 

[silvernutsaq]

The YP-D6 is fairly common and a good value for a TT at $150-200 tops. It is close in performance to the venerable YP-D71, which I had two of, and sold a spare one mint in box w/manual on BT for $300 +shipping. My original has been going strong for 20 years now as a testimony to how durable some of the Yammys are. Oh, but that smooth Yamaha sound is what will seduce your senses. :yes:

 

[jnoyes]

That sexy looking YP-D6 in near mint condition is sold, so obviously someone was willing to pay $300 for it. Which just reinforces my stance that vintage tt's are not only harder to come by but also $$$. Maybe it's because I live in Canada, maybe there aren't as many out there as there are say in the U.S. market. Damn!

It would have to have been in near mint condition to be worth that kind of money and perhaps it was. Keep looking and asking questions and something will come up.

Jon

 

[wushuliu]

That sexy looking YP-D6 in near mint condition is sold, so obviously someone was willing to pay $300 for it. Which just reinforces my stance that vintage tt's are not only harder to come by but also $$$. Maybe it's because I live in Canada, maybe there aren't as many out there as there are say in the U.S. market. Damn!

Lol there'll be other tables. I used to feel that way when I first got into vinyl a few years ago but once you take the patient approach you realize that good deals pop up often, just need to do your due diligence. Still think $300 is more than that table's worth.

 

[BillyBatts]

In the Yamaha realm, I'd also consider a YP-D4 if you want a direct drive.

But as stated above, lots of fish in the sea. Keep looking.

 

[Mr. Disco]

Thanks for the reassurance, I hope something nice pops up, I'm getting impatient wanting to listen to my small but growing vinyl collection (talk about putting the cart before the horse!)
I got a price from a local Audiophile shop on a YP-D4 selling for $175. it's got some damage to the front in terms of missing some of the wood veneer and a curious looking hole underneath which has been partially filled with epoxy or wood filler. I would be more apt to pay this kind of money if it were in better shape cosmetically. I asked the owner how often he gets Yamahas and he said on average 2-3 per month and they sell very quickly, so I may as well keep checking back and looking online.

 

[Mr. Disco]

The YP-D6 is fairly common and a good value for a TT at $150-200 tops. It is close in performance to the venerable YP-D71, which I had two of, and sold a spare one mint in box w/manual on BT for $300 +shipping. My original has been going strong for 20 years now as a testimony to how durable some of the Yammys are. Oh, but that smooth Yamaha sound is what will seduce your senses. :yes:

What is BT? Is the YP-D71 a belt drive? Since I seem to be focused on finding a vintage Yamaha, which models should I be seeking? Perhaps a Direct Drive isn't necessary.

 

[DublinTrader]

BT= Barter Town, where members buy and sell.

 

[TomB19]

Some of the issues I've come across with the Yamaha's direct drive TTs, except for manuals, is the cracking of the gears for both auto-return and lead in. So that is one issue to be vigilant in if you are serious buyer.

I don't know if you're still around but I'd like to know if the gears are metal or plastic. Specifically, I'd like to know if I can 3d print replacements.

Anyone?

 

[mythless]

I don't know if you're still around but I'd like to know if the gears are metal or plastic. Specifically, I'd like to know if I can 3d print replacements.

Anyone?

They're plastic, hence the cracking. If you have a 3D printer I am sure it can be re-made.

 

[TomB19]

Thank you!

And thanks for taking the time machine back to 2014 to save me.