New profile posts

Hi Tom, I see that you posted that you have the manual for the sears receiver that is MHF-94.. If by any chance you have it scanned and you dont mind sending me a copy I will forever be grateful. jbf23.2017@outlook.com

Many interests, astronomy, amateur Radio, metal detecting, licensed pilot, bbq/smoking.

Paul, I might be interested in your EA10 for my GX85D, as my 10.5" reel mod on my GX280D will not allow me to use standard 7" reels, only NAB reels. Can you shot me a picture of the axle bearing mounts? How much are you asking?

Thanks,

Rick

does not like to visit the forum anymore due to the intrusive ads spoiling the fun

Hello,
I'm about to embark on tweeter repair on C95s. Any advice? How did it go?
Thank you!
ben

I have a Sansui G7700 still sitting in it's box that is all original and was only powered up a few times. Came from my parents divorce in 1982 was put in it's box and stored, when mother passed I got it in 2009. Who knows if it's balanced, caps ok, or what works on it. still looks brand new.

Hi gonzo, Im just getting into my mach one mod. I'm wondering what you decided to do about the vents in the horn driver body? Did you just leave them open? When I asked AI it told me to cover them with plumbers putty....But it seems that steve just left them open? Wondering what you did and how it worked out. Thanks

Hi, I have the same unit, were you able to find a manual on this? I believe my unit needs new 2SC793 Power Transistors, the volume isn't there. thanks

Good morning, Dony. Started going thru your check list this am, and got as far as step 9, and I'm stuck. Just to verify, I have an Hp model s5603w desktop. I'm not getting the allerts on a watched item that I should get, but will watch for a reply. Here is a pic of the screen I'm on.

Hi Dave.

Any chance you can source some incandescent bulbs for my Kenwood 700M? Would love to have two sets for backup. Thank you!

Christopher

Hello - were you ever able to locate Baldwin schematics? I have a power transformer and it looks identical to the one in your third picture - 003.jpg. I know the voltages, but not the current ratings. Any information would help. Thank you!

one of the 47 uf on the relay board are backwards according to the schematic and other techs.

Need help, I need to purchase new cross overs for a pair of Dalquhist DQ 10, I live in Mexico with makes it more dificult to find someone. Thanks for the help

Hi Dave,
Hope you are still sending out lights, etc. I'm looking to relamp my Marantz 2285B with incandescents. I also need a dial pointer light. Can you let me know what this runs and shipping dets.
Thanks,
Steve

Looking to buy the "STK-0050-II,60,70,80 replacement Modules(2), complete kit with all parts & docs" off eBay, but there is a no ship to Maryland, US issue. I messaged you about it. Do you sell here? I can do PayPal or Venmo.

I have a Fisher SA 880 I can't seem to part with that needs "restoring".

Thanks again!

David Heikamp
717 Giuffrias Avenue
Metairie, Louisiana 70001-4814

The regulator current draw is from the feed resistor through the 0D3's.

Should not affected by the drivers or grids. According the original schematic...

RIP sansui au719 - 2026. This member's memorial information can be found here: AudioKarma's Memorial Wall

Hello. I am an audio enthusiast living in Japan. I can provide information on the DS-3000, specifically the crossover network diagram and component values that I have analyzed.

Hi, My name is Dan and although I have mostly collected, restored, and sold racked studio gear, I have a few pieces that really fall into the audiophile catagory. I will be listing them but I am not familiar with this system...Yet! Its coming. A few things I have, McCurdy transformer discreet broadcast quality phono preams(pait, Altec model 9842 (grey) same as Altec model 14, and all original Kenwood Model 700m.