• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

New profile posts

What's new Featured content New posts New media New media comments New profile posts Latest activity
T
Subject: Fisher CR-5120 Cassette Deck, Plays great but cannot engage the record function: Depress pause then play & record simultaneously & they will not lock in position. Removed the faceplate & examined points where lubrication was factory applied. A shiny black lubricant (like lithium) not hardened on the moving interface points or surfaces. Suggestions? Richard
M
M Anthony
Suggest first check the write protect tabs on the cassette edge. It's to prevent accidental erasure. Then check lock out parts in the transport, may out of adjustment. Also, pushing on the controls too hard in the write protect mode may have bent something. When users are not aware there was such a feature, can caused more issues. Either way, best to ensure this function is working before going further.
T
titonrafter
Aware of protective tabs on the cassette case, had not considered excessive force on function buttons. Good tip, will check before going further.
TkelleyAK
Hello From ALASKA, NEW Magnapoan LRS+ arriving TODAY, will compare to my 20yo Magnapan 1.6QR
P
I've a (lucky) friend who's just acquired a near mint condition SU-V7X. What he's now seeking is a user manual. He has the service manual. Any ideas please?
Massa
Massa
Hi, I have two mint SU-V7X's and I do have a manual. Would you like me to send a scan or are you looking for an original? Thanks
B
Hello, I’d love to get your DCM speakers… I’ll be driving (moving) from Idaho to New York the first week of May and if you still have them then, I can pick them up. However, the logistics of the 4-day drive are still pretty fuzzy and I can’t ask you to hold them for me. I’ll check back with you closer to my dreaded drive if it’s ok with you
anotherhobby
anotherhobby
all yours .. let me know
B
Bbyaka
Thank you! I’ll check with you before we start our drive to make sure I need to save room for them in the trunk and to get your address
P
Hello Dimanag,
I have the exact same problem as Junglimonito in the previous post. AVR 2113 E2 (Europe) with messages GUI VER. ERROR, Packet: 0000, and ▲GUI: FFFFFFFF.

Could you please send me the firmware for USB
(I dont have the writing kit for rs232)

My email: petarjanevski@gmail.com
Thank you in advance

BR
D
dimanag
Hi!
Give me couple days to search for this as i had a hdd problem and lost my data base!
P
pepi.san
Sorry to hear that, I by any chance you manage to find something, I'll be gratefull.

BR
Tara Lewis
Hi, Chris I have owned from brand new a Peerless SCL-1 MC Step-Up Transformer. I use it for my Linn 12 with a Kandid cartridge into a highly modified Dynaco Pas 3.
It might just be the finest SUT out there.
RZ1
Fun fact: My Sansui 7070's signal meter is inverted. That means that the closer that meter is to 0 the stronger the signal
RZ1
RZ1
I consider it to be more of a tower proximity meter than strength meter
J
Hello, I have a Zenith wave-magnet trans-oceanic radio. Would you know if anyone in the NH area who would be interested in this for repair or parts? We did try to turn it on but not sure if we actually know how. Appreciate any help with this.
J
buenos dias soy Jose Luis , he leído que usted es distribuidor de sanken ....
Estoy intentando localizar unos transistores de calidad.
2sa1492 PNP
2sc3856 NPN
gracias
VoltMan
If you don’t have a grounding wire, do something to make one. You should have a ground between the receiver and the turntable. Sorry, I’m a bit sporadic. I’m driving at the moment hehe.
VoltMan
Something like that. It’s probably overkill. But I like the fact that it has solid state versus switches which can get dirty and noisy.
VoltMan
2/2 update ….The Denon has the ability to turn off the equalizer. It’s in the instruction manual, but I don’t know where the SWITCH is as I don’t have physical access to a turntable like that. You might have to remove the platter and poke around a lot to find it. But in any case, that seems to be the issue, as by default, it is turned on.
J
joshualizer
That’s crazy thanks! So it’s a separate switch from the pre amp switch on the Denon? I do know where that is it’s under the platter. But I wasn’t sure if you can disengage the eq separately from the pre.
Back
Top Bottom