• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Home Built Mega Amp

speakerlust

Super Member
Banned
I want to build an amp that really puts out and I wonder
if anyone here has ever done this ??? ......
Can you save any money building your own amp ???

capacitor-comp.gif
 
Register to hide this ad
Sure. You can often save money over buying new by going DIY, once you've built up the necessary collection of tools and skills.

Of course, you can often save money over DIY by buying vintage or at least used.

Why do you possibly need that much power in a home stereo? I'm afraid I'm not too familiar with the conventions of the auto gear in your picture, other than that the auto amps are without exception 4-ohm stable.
 
Can you save any money building your own amp ???
If you're looking for a well-designed, well-built, quiet, powerful amp with low distortion, no. Unless you really know what you're doing, already have the tools, some test equipment, and a large bin of parts, that'll be true - to paraphrase a slogan from Ivory soap - 99.44% of the time. If you just want to build "an amp" you can probably find something as good or better on the market for less. Decent amps are pretty cheap these days.

With a sophisticated device like a high-quality amplifier, if you can buy something "off the shelf", it will almost always be cheaper than assembling the equivalent from scratch. Even if the design is given to you, buying the parts alone at retail prices will, in most cases, more than wipe out any savings from paying retail for professional engineers to design, professional assemblers, using professional equipment, to put it together, including reasonable (but not ridiculous) markup.

This advice above may or may not apply to some amps with simple circuits and low part counts, like S.E.T. amplifiers, that are hand-built in small quantities and sell for very high prices. The beauty of an S.E.T. is in its simplicity. They're low-power - hardly "mega-amps" - and use high voltages, though, so be very careful if you build one!

It can be fun, very educational and very satisfying to DIY - that's where the reward is. Just don't expect to save money.
 
With a sophisticated device like a high-quality amplifier, if you can buy something "off the shelf", it will almost always be cheaper than assembling the equivalent from scratch. Even if the design is given to you, buying the parts alone at retail prices will, in most cases, more than wipe out any savings from paying retail for professional engineers to design, professional assemblers, using professional equipment, to put it together, including reasonable (but not ridiculous) markup.
:no: Not entirely true..Really depends on your parts sources...Cost of course plays a roll but..in the end its personal sense of accomplishment.What price would you put on that?
professional assemblers
Who get paid less than minimum wage in Mexico or elsewhere.
 
The L-MOSFETS are about $10 apiece the rest of the parts to stuff the boards about $15-20 .The Torroidal transformers that I used were $68. The power supply caps,Heatsinks,fans purchased on Ebay.The enclosures were purchased at Par-metal.com $90
 

Attachments

  • gdwo.jpg
    gdwo.jpg
    46.4 KB · Views: 122
  • DSC011.JPG
    DSC011.JPG
    25.4 KB · Views: 73
  • Trinity fro.jpg
    Trinity fro.jpg
    33.2 KB · Views: 65
  • Trinity   # 000.jpg
    Trinity # 000.jpg
    61.4 KB · Views: 88
  • 1&2.jpg
    1&2.jpg
    42.1 KB · Views: 66
The L-MOSFETS are about $10 apiece the rest of the parts to stuff the boards about $15-20 .The Torroidal transformers that I used were $68. The power supply caps,Heatsinks,fans purchased on Ebay.The enclosures were purchased at Par-metal.com $90

WOW !!! ....... :banana::banana::banana:
 
More pix...I use the P101's to power the two sets of NS-1000's.As you can see you can make them as cheap as you want.I think these turned out pretty good . Of course if I were to start all over.Ya theirs a few things I'd change. But ****..these sound excellent the way they are....dead silent no hum ...To frickin loud when you crank'em up ..And they really don't need the fans because they do not run that hot,just alittle warm. I love cranking up Vangelis-Chariots of Fire the bass is solid and the highs are crystal clear:thmbsp:
 

Attachments

  • 44,600uf per rail.jpg
    44,600uf per rail.jpg
    40.5 KB · Views: 140
  • softstart.JPG
    softstart.JPG
    70.5 KB · Views: 119
  • MainSystem2.jpg
    MainSystem2.jpg
    40.3 KB · Views: 160
  • vamp.jpg
    vamp.jpg
    71.1 KB · Views: 131
More pix...I use the P101's to power the two sets of NS-1000's.As you can see you can make them as cheap as you want.I think these turned out pretty good . Of course if I were to start all over.Ya theirs a few things I'd change. But ****..these sound excellent the way they are....dead silent no hum ...To frickin loud when you crank'em up ..And they really don't need the fans because they do not run that hot,just alittle warm. I love cranking up Vangelis-Chariots of Fire the bass is solid and the highs are crystal clear:thmbsp:

That is sooooo SWEET !!! .... MY GOD !!! ...... :banana::banana::banana:

Dudeness .... you da man .... speakerlust :ntwrthy: :king: avionic
 
Many would also consider the Marshall Leach designed Low TIM amp 100watts/channel its latest configuration, lots of his students at Georgia Tech have built them as projects. Google Leach Low TIM and you'll find a lot of information about them.

regards,

Bart
 
Hi, I second the Leach amp. I was given a dead Crown DC-300A and converted it into a Leach amp. Total cost of parts for both channels, $128. Probably could have done it a little cheaper. J
 
Hi, I second the Leach amp. I was given a dead Crown DC-300A and converted it into a Leach amp. Total cost of parts for both channels, $128. Probably could have done it a little cheaper. J

Hi James, you have any pics of your converted amp? Hadn't seen one implemented in a Crown Chassis before.

Regards,

Bart
 
Back
Top Bottom