• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Home Built Mega Amp

Wow again! James, that's a very professional adaptation to the Crown chassis. Like the way you did the front panel, sort of reminds me of the Dynaco ST-150/300 type faceplate.

I can see the heatsink nounting of the outputs (and note you have room for double the # of transistors - ever think about building the Leach SuperAmp?). But do you then attach/mount additonal heat sinking onto the primary fins as shown in your first photo - the heatsinks look like they've got a lot more fin stucture than in the output transistor photos.

Also, what version / revision of the Leach did you build?

Regards,

Bart
 
May want to check Aspen Amplifiers / AKSA. They're more of a kit (less chassis and a few other key elements) and not particularly cheap, but some DIY circles are fond of them. Never heard one myself...
 
Thanks Bart. Yes, those are extensions clipped on the primary fins in the first photo. I have thought about the Super Amp and might build one someday or when I find another DC300. The version built is 4.5 with modifications to the board to reduce the wiring and supplied with ±60V. J
 
avionic, the transformer and filter caps are original. The bridge rect. I had to replace and could only get at the time a 600V 35A unit. The caps are 13000uF @ 70V and the transformer is 84VCT @ 1kW J.
 
avionic, the transformer and filter caps are original. The bridge rect. I had to replace and could only get at the time a 600V 35A unit. The caps are 13000uF @ 70V and the transformer is 84VCT @ 1kW J.
Power supplys are KEY:thmbsp: In my amps I used:
1.) Antek Toroidal 100 vct @ 800VA
2.) IR 500v@45A bridged rect.
3.) 2 Cornell-dublier 35,000uf @ 80vdc and 4 Phillips-7800uf @ 100vdc

Dave
 
Can you save money building an amp?

Well, considering I've never seen another US-made commercial version of my amps, and the ones in Japan sell for $5k or so...yeah, you could say that :D
 
You just go to Wal-mart and get that 'genuine' 3000W "made in china" car amp
Yeah but all the car batteries and cables looks real tacky in the mancave.:smoke:
 
Back
Top Bottom