• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Are these Dynaco A25X speakers?

Wardsweb

Behind The Curtain
Staff member
Admin
From what I've seen, I thought the port was on the bottom and not above the tweeter. Also I have never seen the ring around the tweeter before.

Dsc_0088.jpg
 
Register to hide this ad
I believe these are just the early model of the A-25. The cabinets should have the same dimensions the commonly known A-25, but early runs of the speaker had the port above the tweeter, instead of below the woofer, as is more commonly seen.


I'm glad to see the plastic grate over the port - I had a pair of these, and I thought the plastic was a cheap replacement for what was originally there - but, apparently that's just the way they were made then.
 
Interesting. I've got two pairs of these with widely differeing serial #s and all are of port on bottom config. All have the inexpensive looking plastic grille stapled over the port too.
 
From what I've seen, I thought the port was on the bottom and not above the tweeter. Also I have never seen the ring around the tweeter before.

Dsc_0088.jpg

Out of curiosity, where is that wire going off to the lower right? Is it some kind of remote?

Nice looking speakers! I've never heard A25's. But if I ever see a pair I will snatch them up as I know they're legendary for their size.

Rick
 
Out of curiosity, where is that wire going off to the lower right? Is it some kind of remote?

Nice looking speakers! I've never heard A25's. But if I ever see a pair I will snatch them up as I know they're legendary for their size.

Rick

This picture was taken at our last Lone Star Bottleheads meeting. Fredt300b gave me the speakers. They were in fairly rough shape so I refinished the cabinets and recovered the grills. Other than that, they are original and sound way beyond what they look like they would.

The wire you see is going to an iPod, which was the source being used with that Bottlehead 6DN7 amp that was pushing the speakers.
 
Those are the version based on the Scan Speak drivers, not SEAS.
They are not the XL version.
I believe that they are 4 ohm.
 
I have both kinds. I don't know why they changed. I think the ones with the port at the top are more rare.
 
Back
Top Bottom