• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

1030

  1. V

    1030 mid-resurrection...

    Moving this question off another thread where I was able to get some great help tracking down an issue on a 1030 P700 amp board that was producing sound on the left side only. Once I was able to get sound out of both channels, I replaced problem preamp transistors and recapped the power supply...
  2. harlest

    Marantz 1030 P700 Transistor

    I was hoping someone could help with matching the transistors on the 1030 amp board. I really love this little amp and don't want to lose it but she's popping and crackling pretty bad. I've replaced all caps and installed pre out jacks which helped me determine that it's definitely in the amp...
  3. A

    Marantz 1030 repair - left channel noise

    Hi all, I´m new here. My Marantz 1030 has a loud hum/noise in the left channel, right is ok. The noise is there with volume at 0, I´ve made a little video to demonstrate: I´ve built a couple of effects pedals, so I know a little about reading schematics and I can solder, but this is completely...
  4. Bluefisheye

    Marantz 1030 - H504 & H505 identification?

    On the 1030's service manual for the tone, preamp board P500, there is no description for the H504 and H505. Someone knows what is the right description for those transistor? Thx
  5. Mike Sweeney

    KX-1030 Cassette Deck

    I just picked this up to fill out the set of the Kenwood receiver, amp and turntable :) I got it and they said it "powered up".. that was the extent of their testing. I got it and yes, it powered up.. even played somewhat.. bad speed control, sticky controls etc.. pretty normal. I opened...
  6. A

    1030 amplifier faceplate

    Hello everyone, I've got a little 1030 amp that I bought a while ago and intend on rebuilding. It has a lovely champagne face but unfortunately the face is the problem. It has a serial number engraved (like some of these vintages pieces do by their previous owners) and also a very faint (but...
  7. Mike Sweeney

    Just when you think you have it done

    I have a 1030 amp that I restored some months ago and it sounds great.. except for the Phono so I parked it till I had a chance to go back into it. What I found was a mis-marked board for four of the caps regarding polarity. But that wasn't the real issue. Two of the caps had not been replaced...
  8. A

    Noisy Headphone Jack on Marantz 1030?

    Guys, I recently picked up an integrated Marantz and it sounds great--save for the fact that plugging in a pair of headphones results in some fairly noticeable static and perhaps even some faint humming that won't change despite any volume adjustment. To be clear, there's some faint static...
  9. A

    Noisy Headphone Jack on Marantz 1030?

    Guys, I recently picked up an integrated Marantz and it sounds great--save for the fact that plugging in a pair of headphones results in some fairly noticeable static and perhaps even some faint humming that won't change despite any volume adjustment. To be clear, there's some faint static...
  10. Keith Baran

    Marantz 1030 Power caps question

    Hello all I’m on the last leg of a 1030 refurb, my first ever. The problem on the P700 is repaired, the amp board P700 and pre amp P500 are recapped, and everything is working and sounds great. The only things left is the re-cap of the P800, P900, and the three output caps. Here lies my...
  11. Richs_Trains

    Quickie 1030

    Hey All, got a 1030 the other day, it had a nice wood case, so I picked it up. Did a quick recap and set-up, sounds nice for a very small amp, but a little lacking in the low end. Here's the pics.... Thanks Rich
  12. Marantz Model 1030

    Marantz Model 1030

    ...like new ;)
Back
Top Bottom