• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

500

  1. T

    My PMA 500 AE probably needs to be replaced

    My Denon PMA 500 AE has had the input selector clicking for years but I have been patient. Now sometimes the sound quality is bad even with a different AUX cable or source. It starts breaking or as if the quality is less than 128. I had bought this from Greece (EU plug) and now have it in the...
  2. B

    Need to find VU meters for Marantz 500

    They say fs.. 200uA on the back.
  3. dankik

    Nakamichi 500 Pause Stops Take-up Hub, but not Capstan?

    I am refurbishing my old Nakamichi 500. In the process of recapping boards I noticed that at some point the pause does not work. When in Play and I press Pause, the take up reel stops turning but the capstan and pinch roller continue to operate so i get a tape spill. There is a microswitch...
  4. David Weaver

    Sansui Model 500: My First Tube Amp

    I've refurbished several solid state Sansui's (AU-555a's AU-888's, QS-1, QS100, 350 to date) but I never had a tube amp to refurbish; until now. Recently, I acquired a Sansui Model 500 that is in pretty darn good shape at least visually. The only thing I can see that is broken is the AM antenna...
  5. T

    Marantz 500 handbook with circuit description

    Hi all I upload to HiFI engine the 500 handbook - quite had to find it seems. it has the circuit description in it - my favorite part :D Robin
  6. sansevy

    Kenwood 500 Volume Pot Repair?

    Hi folks, I recently purchased a Kenwood 500 off of ebay. The previous owner noted that the volume pot was not functioning properly and that his tech had given up on trying to repair it. I am assuming that I cannot source an original version or replace it, so I was wondering if anyone thinks...
  7. X

    Need help identifying a Magnavox 500 Solid State Amp/Receiver

    I found what appears to be a nice Magnavox 500 Amp/Receiver that I can't find anywhere online. I found one that is similar but appears to be the next model up: https://www.worthpoint.com/worthopedia/vintage-magnavox-1000-solid-state-115836961 . Everything appears to work on it and it has a nice...
  8. B

    Fisher 500 Mono Bulbs & Knob

    Hi, I"m working on restoring a The Fisher 500 mono tube receiver and there are a few bulbs in the front panel that look like fuses that are not working. Does anyone know where to find replacement bulbs? and It's also missing a knob, any leads? thanks!
  9. Krosya

    Jensen System 500 Speakers - rare find and a nice surprise!

    Thanks to all of you and this forum, ever since I got into vintage stereo I cant pass up on interesting speakers. To keep myself from buying everything I come across, I try to stick with rather rare and unusual model. Plus only if they are sold cheap (under $100). I already made a thread about...
  10. davstev

    Kenwood 700M vs. Supreme 500/600

    I have a 700M (recapped) which I really like. I have always wondered if anyone has compared the sonic character and performance of a 700M against the Supreme 500/600's (assuming the 500 & 600 are very similar sounding to each other). I know that the 700M is just a power amp and so it's hard to...
  11. D

    Need Fisher 500C help

    Just bought a 500C and an Elac Miracord 10H for $150. I'm thrilled! Turntable is in excellent condition. The Fisher has a few issues mainly the fact that I think the right channel is out. The unit is very clean, but I removed, cleaned, and reinstalled the tubes. The sound improved in the left...
  12. ONKYO SCEPTER 500

    ONKYO SCEPTER 500

    My wish list no.-2
Back
Top Bottom