Greetings,
I am currently restoring a B and O Beocenter 9500. Recently it has developed a loud pop through the power link and passive outputs on initial power up from stand by. Doesn't matter which source is selected.
Is this a failing cap issue? Couldn't find any previous posts on this...
Hey All,
Hoping for some B and O types to chime in. I picked up my first B and O system this week, a clean Beocenter 9500. Got it home and began doing my full test and check to see what shape it is in. New tape belts (Expected), but the passive speaker outputs aren't working as they should...
Hop i reached the right forum.....
I have a Beocenter 9500. An old machine with several issues.
One of them is the sound settings. Bass / treble / volume.... When restarting the stereo, it has lost the memory of the last setting...
Anyone has repair ideas ???
Regards Martin.
Hello All,
This is my first on this forum. I have managed to get hold of a sansui Au-9500, which is more of less fully working . However the NR adapter switch is faulty on the front panel. As this is part of the pre-amp circuitry the only way the amp works is if I adjust the switch to is half...
Hi,
I recently purchased a Sansui AU 9500 that had undergone a full service and partial recap. Upon receiving it, it took a longer than normal time for the speaker relay to switch on. Once the amp was warm and the relay had switched once, it worked perfectly and would switch at a normal time...
weighing in at 51.26 Lbs. the transformer is probably the half of weight. This is a very clean second hand purchase, with just the left channel DC offset in the high 90's. Now both right and left DC run + - 2.0