Hey everyone! First post on AudioKarma here but I've been getting advice from the forum for years!
I had previously been using a Pioneer QX-747 quad amp with a set of B&W 600 s2's & a pair of JBL LX-55's (each hooked up to its own channel since there are four). I have two Technics MK2's and I...
My AR3 grilles are warped enough that the support piece in the middle is contacting the woofer and causing sound distortion with heavy bass even at lower volume.
I tried some different speakers and took off the grill and it took away the “distortion” vibration.
Besides just using them...
Hello All! This will be my first post on the forum, but I've been reading threads for months. A couple weeks ago I stumbled upon a set of AR3's at an estate sale, and bought them (of course). While cleaning the potentiometers yesterday I encountered quite the problem. The tab that contacts the...
I would recommend using this simple plastic tool from Harbor Freight to remove the grills. I used a small 3 inch plastic putty knife on the first speaker grill. Not good. So pondering my problem I checked at Harbor Freight and found this Paint Trimmer tool. $1.50. I went along the side edges...
So I fairly recently obtained a pair of AR3 speakers that were in pretty bad shape and, with the generous support of members on this forum and a few other sources (more on that later) I managed to restore them to what I feel is a good representation of their former glory. I wanted to share my...
Hi all,
I recently purchased a C29 preamp and so find myself able to venture into the McIntosh section of audiokarma for the first time looking for a bit of advice.
Having recently restored a pair of AR3 speakers I now have a second room set up of a Thorens TD160mkii table, Topping D90 DAC...
My dedicated listening room as viewed from the entry doorway. Three Celestion 700's are the main speakers with AR3's (original) providing the 0.1. Celestion SL12sis are used as the surround speakers in this 5.1 music system. The 13" monitor is used for navigating the DVD-A menus and...