• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

bi-amping

  1. M

    Bi-amp Klipsch w/MC275 and MC152 at different Ohms

    Hello experts. I am currently bi-amping my Klipsch Heresey iv speakers with a C55, MC275 for the highs and mids, and a MC152 for the woofers. I have the C55 set to bi-amp in split mode with crossover frequencies set at 3000hz low pass and “bypass” for high pass. Currently the speakers are...
    • M33SEC
    • Thread
    • bi-amp bi-amping c55 klipsch heresey mc152 mc275 mc275 vi ohm ohms
    • Replies: 8
    • Forum: McIntosh Audio
  2. Kkristen70

    Bi-amping JBL XPL200

    Hi, I am looking for some advise on Bi-amping a pair of vintage JBL XPL200 (6 Ohm). 1) Firstly, is it worth considering bi-amping at all - any experinces with the JBL XPL 200 in particular? 2) I have a 2x200W/8OHM (Onkyo M-588) that I would consider for the low frequencies. Should the high...
  3. J

    Bi-amp with integrated amp and receiver (which is best?)

    Hello everyone, I’ve recently acquired a set of R-series, R11’s for front, R2C for center and R3’s for surrounds. Subwoofer will come later, but for now that’s it. I have used a Yamaha A-S1100 integrated amp for stereo listening for about a few months before also going surround. As a result I...
  4. Raphaz

    Setup and wiring multiple speakers plus subwoofer for two rooms

    I have two receivers, two sets of speakers (for different rooms) and one subwoofer hooked up to two receivers. The goal was to be able to adjust loudness and switch the sound on/off independently for each room/speaker set. Gear list below. I’m constantly wondering if I wired everything the...
  5. M

    Bi-amping Renaissance 90 speakers

    Hi everybody, newbie on the forum here! I was gifted a pair of Renaissance 90s from a friend who switched to a new set. I have a couple of power amps at home and I was wondering if I can use to drive the speakers in horizontal bi-amp mode. The first amp is Mark Levinson ML-9 which according to...
    • Maria83
    • Thread
    • bi-amping infinity
    • Replies: 8
    • Forum: Speakers
  6. P

    Bi-amping KEF 107/2s with KUBE 200?

    Has anyone ever tried bi-amping KEF 107/2 speakers with a kube 200? I know they are not a specified match, but with it being near impossible to find a 107/2 kube I'm interested in giving it a shot. Cheers and thanks for the advice.
  7. Tiver

    Gain matching for biamp

    Hi folks, I have acquired an ADS C2000 and will be looking to bi-amp some ADS L1230. I don't have a lot of knowledge on the demands I will be putting on the amplifiers. What I think is, as different program content puts demands on the amplifiers, they will respond accordingly and the output...
  8. Riki

    Marantz 2230 Power Amp Recomendation (Bi-Amp Project)

    I'm thinking about bi-amping a pair of Heathkit AS-101 speakers. I've really enjoyed listening to them with my 2230. What I envision is using the integrated power amplifier to drive the horns and using the external power amp for the woofers. What would you recommend for a power amp? I'd like...
    • Riki
    • Thread
    • bi amp bi-amping heathkit marantz marantz 2230 valencia
    • Replies: 0
    • Forum: Marantz Audio
  9. Sam08861

    Bi-Amping Altec Lansing Model 14 with Driverack PA2 - Project and Questions

    I've decided to give this a try, follow the example here, although with different amps. Don't have much experience in speaker building, bi-amping or using crossovers, so have some newbie questions...
    • Sam08861
    • Thread
    • active crossover altec lansing bi-amping driverack pa2 model 14 output threshold rta
    • Replies: 64
    • Forum: The Lansing Legacy
  10. L

    Bi-amping open baffles

    Hi, all, Hoping someone might be able to provide me with some advice. I recently built a pair of open baffle speakers with the assistance of Martin King (MJK) and his mathcad worksheets. I used Eminence Alpha 15A woofers and Alpair 7 full-range drivers on 18" x 24" baffles. I also build some...
    • leer0y
    • Thread
    • bi-amping open-baffle valve amp
    • Replies: 7
    • Forum: DIY
  11. E

    Bi-amping using rear surround amp outs

    Hi folks, couldn’t find this question answered on here. So I just got a Denon AVR-2808CI (7.1) receiver and I have a 5.1 setup with some Infinity IL 40’s as the fronts. This is also my music listening system, and I really like these speakers. The il40’s have bi-amp capability, and the denon has...
  12. Funky54

    What do you do to set gain when bi or tri-amping?

    This thread is NOT a debate about bi-amping. If you ARE bi-amping please share and participate. I also would like it to NOT turn into an argument over passive and active crossovers. Of course everyone has an opinion and they are welcome to share, but please don't let that take over the topic of...
  13. JarrettUrban

    Questions about the way Bi-amping works on a Sony STR-DH770

    So soon I am going to have a new receiver from Sony (STR-DH770) and it has the capability to hook up speakers in the bi-amp mode. I have some bookshelf speakers that have two wires coming out the back. One for the lows, (two woofers) and one for the horn. Now the amp manual says to hook the...
    • JarrettUrban
    • Thread
    • bi-amp bi-amping bookshelf speakers no crossover blowing out tweeters no crossover for tweeter sony str-dh770
    • Replies: 5
    • Forum: Home Theater & Video
  14. rjohn

    Questions about biamping

    I recently purchased and re-foamed a set of Infinity CS 3007 speakers. They sound very good, especially in the mid and higher ranges. I have them separate from my regular system as it is in a cabinet which is very difficult to switch equipment in and out of. I am powering them with a Marantz...
Back
Top Bottom