• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

cross-overs

  1. N

    Help with Advents

    Hi all, Apologies for probably being an annoying noob but I am struggling a little here and hopefully you will take pity given my circumstance. So my Dad is in his 70’s and his health is pretty bad, so I was trying to give him a surprise to cheer him up. He always loved his Advents and for...
  2. G

    B&W 802 Series 80 Recap

    This is my experience with recapping the cross-over boards on my B&W 802 Series 80 speakers. I’m the original owner of these speakers that I purchased back in 1982. All the tweeter, mid and base drivers on both speakers are still in excellent condition. However the components on the...
  3. O

    AT-12 crossover question

    A good while ago, I went from "Lets fix my AT-12s cabinet rattle" to "Could I build these from scratch?" as one does. I've been aiming for as close to manufacturing as I can get but while documenting the cross fades, I noticed two things. - I can't figure out what rating the "MCI" PTC resettable...
  4. Cheeseknot

    Infinity RS4 (early 80s) Crossover Questions

    Hello friends I'm planning on replacing the capacitors in my much loved RS4. I found this technical manual unfortunately there are a couple of mistakes. This makes me hesitant to follow it. I was able to verify or find the actual values of everything except for 19uF midrange cap Does...
  5. John Carr

    Designing a custom crossover.

    I have been designing crossover specifically for the drivers I have. I have never done this before, but I know that the goal is to flatten the response fairly well. I did input my specs into a crossover calculator and designed it in xsim, with a few tweaks. Does that look like a good response in...
  6. John Carr

    Need 3-way Crossovers.

    I just recently finished building some custom speakers, but i only had a 2-way crossover on hand to try them out. I have done a fair amount of research trying to find some quality passive 3-way crossover units.I have spent a good amount of money on other parts and am limiting myself to not spend...
  7. S

    Please Help Me Recap My Yamaha NS-200M And HPM-60 Speakers

    I am very unimpressed with the sound of these speakers. Would a SA-9800 be unable to push them enough? Compared to the HPM-60'S I have set up on the same amp, they sound like rubbish to me. Muffled, no bass, not even much high end. I want to re-cap the cross overs to see if they improve but...
  8. seifreit

    NPEs for cross-over recap

    I just picked up set of Kappa 8s and I am going to do a partial re-cap, replacing all the NPEs. I've used Mundorf E-caps when I re-capped my RSIIIbs, RS5bs and Kappa 6s. Very happy with the results but here is my dilemma. I need much larger NPEs for the woofer section of the Kappa 8s and I can...
  9. T

    BOSE 601 Serie I , Crossover replacement.

    Hi, I got a pair of Bose 601 Series I speakers from 1977 that havent been used for more than 20 years. I've taken the speakers to a technical service to restore the foam to all the woofers and tweeters and he told me it would really improve the sound to change the crossover for one new...
  10. ccawker

    Heresey Cross-over conundrum

    I just acquired new cross-overs with Dayton caps for my Heresey lls.....problem is i wanted Heresey l recaps,can i use these on my 1s or will that not work.
Back
Top Bottom