kr-9600

I recently bought a KR-9600. When I bought it, I was having a problem with the pre-amp. It would only work partially when you move the selector switch from one input to another. It would then play for a second then stop. It was not just a dirty connector as it was very systematic meaning that it...

Currently working on a KR-9600, going to the mod for saving the power switch with a triac once I get it sorted out. On arrival there was no relay click, chased down to a bad power supply transistor. Following that the relay clicked in and FM at least started to show tuning. Now what I am seeing...

hey everyone, i'm new to audiokarma This particular receiver was my father's and he gave it to me as a house warming gift. It sat for a few years before I finally set it up with the original speakers in my home a few weeks ago. Upon the initial setup the relays did not want to close but after a...

Gents, trying to repair my 9600. No stereo only mono. Was shutting off/back on repeatedly till I took loose the board with R1, R2 to let it cool. Read the thread on board restoration but could not find the recommended replacement transistors. Mouser expecting delivery in June and I can't go that...

New to the site and to audiophilia. I recently purchased a KR-9600 and today I found that the left channel was cutting out. After checking to make sure the connections were all tight, I began fiddling with the sound injection, loudness, etc. I found that the mode switch, when switched to...