• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

magnavox

  1. Harlon

    Decision Time: To Upgrade OPTs for Maggie 9304-20 or Not!?! Help

    For those who aren't following along, I'm amidst a console rebuild with a 9304-20 amp at its core. I'm working through a full console refurb, and it is time to either order upgraded output transformers or not. The idea from the beginning has been to go UL with the 9304-20 using new Dynaclones or...
    • Harlon
    • Thread
    • 9304-20 magnavox output transformers ultra linear upgrade
    • Replies: 42
    • Forum: Tube Audio
  2. Harlon

    Cathode Bypass Cap on AF Amplifier portion of Maggie 9304-20

    Here's what I did. After much reading I came across a thread about improving gain in a 9302 build by adding a 22uf cap across the cathode resistors to ground of the AF Amp section of the two 6EU7s. I had some 33uf electrolytic caps laying around so I jumpered them in place. I had read that 22uf...
    • Harlon
    • Thread
    • 9304-20 cathode resistor bypass cap improvong gain magnavox
    • Replies: 28
    • Forum: Tube Audio
  3. Harlon

    Conceptual Magnavox Console Preamp Control Question?

    For my Maggie Console Rebuild I'm refurbing a 9304-20 powered console with a twist. I just completed rebuilding the power supply. The next phase of the build is the Amp and Preamp. I'm considering moving the preamp 6EU7 to the Amp chassis. I'm wondering about this creating proximity issues for...
    • Harlon
    • Thread
    • 9304-20 controls magnavox preamp
    • Replies: 2
    • Forum: Tube Audio
  4. Harlon

    Doctor, Doctor, I need help. I've developed a nasty hum.

    Finished my power supply build. After running things for a few half hour listening sessions the amp has developed a pronounced hum. This is a Maggie console. I'm using the tape inputs in the tuner chassis to run music through an iPad. I've done a number of things to isolate the source. Here's...
  5. ca. 1963 Magnavox (solid state)

    ca. 1963 Magnavox (solid state)

    Found this a couple years ago and stashed it in the garage. Was moving some things around(trying to make room for MORE stuff) and took this pic. It has a turntable but it was not sitting next to the amp & tuner. I bought then because I liked the look of the black metal cages used on these...
    • louis1957
    • Media item
    • 1960's magnavox shelf stereo vintage
    • Comments: 0
    • Category: Member Galleries
  6. Magnavox 6V6 mono tube amps

    Magnavox 6V6 mono tube amps

    This is one of a pair of tube amps I restored. Removed from a 1950's Magnavox console, recapped and upgraded. Sound terrific.
    • PeterI
    • Media item
    • 6v6 magnavox monoblock
    • Comments: 0
    • Category: Tube Gallery
  7. A vintage Magnavox

    A vintage Magnavox

    For awhile I used my brother's 1962 Magnavox 6QB5/EL84-based dual SE class-A console (#1ST228K) stereo power amp. It's non-ultra linear at approximately 2 to 5 watts per channel, using a pair of new matched Ei Elite EL84EG goldpin output tubes, a single 2003 Electro Harmonix 12AX7EH driver, and...
    • jt1stcav
    • Media item
    • 6qb5 amp console el84 magnavox sep
    • Comments: 0
    • Category: Member's Tube Gear
  8. Polaraman

    Polaraman

    Got this set at goodwill for $1.06 including tax. It is a combo and it all works. Fuse was pushed out in the back and that is why it did not work at the store. Good deal? Polaraman
    • polaraman
    • Media item
    • 99 cent magnavox
    • Comments: 1
    • Category: Horizontal Hold
  9. Arvin b-w, 1966 Magnavox color, 1979 RCA CTC-92

    Arvin b-w, 1966 Magnavox color, 1979 RCA CTC-92

    Arvin b-w; no HV. Magnavox 1966 Magna-color, needed components in HV regulator section replaced and new 6BK4, needed tube socket on board replaced as it had burned. 1979 RCA CTC-92 Colortrak, replaced power switch (you can see replacement on top), added picture tube filament booster circuit...
    • Chad Hauris
    • Media item
    • 1966 1979 arvin ctc-92 magnavox rca
    • Comments: 0
    • Category: Horizontal Hold
  10. Magnavox combo, Hitachi Solid State, B&K TV Analyst

    Magnavox combo, Hitachi Solid State, B&K TV Analyst

    Magnavox combo w/AM-FM tuner and phono from 1968. The screen is burned, someone must have left a pong-type game on the screen for a long time. CRT is somewhat weak but is OK once it warms up a while. $5.00. Also Hitachi Solid state, it allows you to pre-set 8 UHF channels on the UHF knob...
    • Chad Hauris
    • Media item
    • analyst astro-sonic b&k hitatchi magnavox solid state stereo tube tv
    • Comments: 0
    • Category: Horizontal Hold
  11. 1958 Magnavox

    1958 Magnavox

    27-Series Chassis. B&W 17"
    • Charlie
    • Media item
    • 1958 magnavox
    • Comments: 0
    • Category: Horizontal Hold
Back
Top Bottom