• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

mx-110

  1. Geek

    MX-110 MPX Matrix Issues

    Hi Folks, Gotta MX-110 on the bench here (Ser. 188Z6) with a unique issue I have not encountered before. Problem: All (including FM Mono) works awesome. MPX position delivers a mono L-R (left minus right, the info contained on the 38KHz DSB subcarrier) to the speakers. There appears to have no...
    • Geek
    • Thread
    • matrixing mcintonsh mpx multiplex mx-110 tuner
    • Replies: 6
    • Forum: McIntosh Audio
  2. M

    MX110 has intermittent audio issues

    I had gotten the preamp on ebay in ok condition. It needed a cleaning and had 1 previous owner from what I was told. It works, but I noticed intermittent issues with the audio. Sometimes one channel will go low and then back to normal. Also both channels don’t seem balanced. I’m getting it...
  3. m_cugat

    Hum when listening to FM on a MX-110

    Hello to all Mac specialists, got my MX-110 (Z- series) back from a complete technical overhaul / restoration a couple of months ago. Every component was checked thoroughly but only was changed in case of issue (to prevent the original character as close as possible), the tech explained. All...
  4. florida71

    Headphones with an MX110--tape monitor?

    Hi all. I'm trying to figure the best way to add phones to my MX110 tuner/pre. I'm thinking about running a Schiit Magni 2 headphone amp out of the tape mon output. Thataway I should be able to cut speaker volume using the 110's volume control while retaining a line signal to the headamp. Has...
  5. westeagle

    MX110 Bumblebee Cap value?

    Hi Folks Doing a power supply rebuild and a slow step-by-step recap of the crucial (mostly 'lytic) caps on a newly acquired MX-110. Just wanting to find out the value of those bumblebee caps. The calculator online tells me they are .18mF, 200v. In all the online discussion, I haven't come...
  6. westeagle

    MC MX-110 Bumblebee cap replacement values

    Hi Folks Doing a power supply rebuild and a slow step-by-step recap of the crucial (mostly 'lytic) caps on a newly acquired MX-110. Just wanting to find out the value of those bumblebee caps. The calculator online tells me they are .18mF, 200v. In all the online discussion, I haven't come...
Back
Top Bottom