nagaoka mp-200

Feeling like a bit of a newbie on this one, but I suppose the reality is, I am and after hours of reading, figured it can't hurt to just ask. First off the set-up for said new cartridge: - Pioneer PL-518 TT - Luxman R-1050 and Marantz 2245 Receiver - Celestion Ditton 332 or Ditton 44...

I have a Nagaoka mp-200. It's mounted on a 1983 LP12 Valhalla with Basik LVX arm. When the stylus needs replacement. I was considering a mp-500 stylus. It's a cemented Microline on a boron cantiver. The mp-200 is an elliptical on boron cantilever. My hearing may not pickup all of 8k+...

Hi all, This is a continuation of another conversation but with a focus on distortion and sibilance with regard to two cartridges… Ortofon 2M Bronze (my present cartridge) and Nagaoka MP-200 (a cartridge that is making its way across the globe to its new home). My set up is: Thorens TD125 SME...

Hi there everyone, I am finally taking my SME 3009 tonearm in to get fixed. It is missing the connector for the headshell. Presently the wires go from the cartridge straight in. And the headshell can’t be perfectly set up as a result of the missing connector. I have an Ortofon 2M Bronze...

Nagaoka MP-200 Cartridge with ReVox B790 Turntable - Hints and Lessons Learned (To conform with file uploading limits a reduced size PDF file containing the figures is attached). History * My ReVox B790 Linatrack turntable serial number 004778 I purchased new in July 1978 from REW Audio Visual...

Is anyone running a Nagaoka MP-200 on a Yamaha PX-2 (or a PX-3, since it shares the same tonearm)? I picked up a PX-2 a few weeks ago, but have been traveling and haven't had a chance to use it. It came with an incorrectly set up Grado Black, but I'd like something better for this table. I've...