• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

parallel

  1. michaelm101

    Which Vintage Integrated Amps Have A + B = PARALLEL CONNECTION?

    I have a pair of 1980s GNP speakers that require the satellites to be connected to "A", and the (passive) woofer box (2 separate L & R woofers) to be connected to "B." I've discovered here on AK, that my old Kennys are A+B = SERIES, so I currently have an old Kenny running the satellites, and...
  2. G

    First recap job with Sansui 8080

    Got a Sansui 8080 and already replaced all the fusible resistors on the driver board F2436. Trying to recap most of the electrolytics. Regarding the power supply filter caps... The existing ones (2 x 6800 uf) both measure good and are measuring above 7100 uf in-circuit. I would like to increase...
  3. Mahan Safaei

    Another Impedance Question: receivers with built-in speaker selector

    I have been trying to figure this out reading the different threads but haven't had much luck: I have an Onkyo TX-860 receiver which has a minimum 4 Ohm impedance. Now this amp allows for 2 sets of speakers to be connected to it and has a selector, Speakers A and Speakers B. The question is, if...
    • Mahan Safaei
    • Thread
    • 4 ohm & 8 ohm impedance onkyo tx-860 parallel series speaker selector
    • Replies: 3
    • Forum: Solid State
  4. VonDrake

    Running Four Mixed Ohm Surround Speakers on Two Terminals?

    A few months ago I added 2 extra surround speakers to my 5.1 surround sound setup. 2 small bookshelf speakers each connected in parallel to the left and right surround on my Yamaha RX-V663 (95 watts per channel). 4 surround speakers total on a 5.1 setup. I was inspired by cinema theater...
  5. Manchophile

    Fuse Protecting multiple speakers

    Hi everyone. I am new to this forum so be easy on me. I know just enough to get in trouble. Any speaker gurus out there, this is for you. I have a Phase Linear 400 II and I want to hook up multiple speakers. 4 pair to be exact. If you are not familiar with the Phase Linear it only has...
    • Manchophile
    • Thread
    • fuse fuses parallel phase linear 400 testing power amplifier sansui speaker cable vintage amp
    • Replies: 91
    • Forum: Speakers
  6. OP Music

    I want to stack my OLAs (Advents), would appreciate some guidance

    Hey guys, I have two pairs of Original Large Advents (utility cabs) that I would like to power with my Marantz 2325, I just want to make sure I'm doing this right. From most everything I've read, there seems to be a consensus that powering the Advents in parallel is the way to go. Will my...
    • OP Music
    • Thread
    • 2325 advents marantz ola parallel stacked
    • Replies: 39
    • Forum: Speakers
Back
Top Bottom