Seeing as this is a Pioneer chip, I figured the best place to say this was here. I've been working on a PL-630 and after some reworking and repairs, discovered that the PD1003 oscillator chip was (mostly) dead, and the motor just gently bounced back and forth. I confirmed it was the earlier...
Looking at picking up a Lab-8500 TT.
Does not appear to be much info out there on them. As far as I can tell it was a Canada (and possibly Euro) custom edition of the Lab-500.
Research points to it being built by Mitsubishi (possibly ITT).
It's a quartz lock direct drive. Has a repeat play...
The QL in my DQX-1000 is spinning the TT at 40 rpm. It's been working fine for well over 30 years since I first owned it. Months ago, the problem started but quickly returned to normal for weeks/months after one day. Now it's here to stay. I tried to locate the schematic for the QL circuitry...
Hi, everyone
I have an Onkyo TX4500 that has some FM tuning locking issues. The tuning (centering) meter barely moves and, when tuned to the strong point of the signal, won't hold a lock on it - instead, the "locked", "tuned" and "stereo" indicators blink about twice per second. The...
I recently acquired a 1980 that was fully cleaned, power supply rebuilt and the tuner supposedly aligned. The unit works and sounds great, however the quartz lock will not stay locked. Usually, right when I power the unit on, the quartz lock works as it should. After about 30 min to 1 hr give or...
Real quick...
Anyone have an explanation as to why the quartz locked speed of the platter malfunctions when splicing new RCA cables with the OEM cables?