• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

sx-6000

  1. Richard P

    Pioneer SX-6000 Stereo Indicator Bulb Replacement

    Hi folks. I'm finishing up some work on an SX-6000 and need to replace the stereo indicator bulb. The schematic shows a 6.3V, 0.03A bulb in series with a 470 ohm resistor. This bulb is turned on by the MPX unit through a transistor (2sc711) and the MPX schematic indicates Imax for the...
  2. Led-Zep

    Pioneer SX-6000 repairs

    This is my first post on the forum. I bought an SX-6000 several years ago and used it only for FM. Then I bought a turntable and found the phono inputs 1 + 2 work however there is some noise. I plugged the turntable into the aux and tape monitor jacks and the is barely enough volume to hear...
  3. Classic Pioneer

    Classic Pioneer

    SX-980, SX-3000, SX-6000, SX-727. The Yamaha RX-730 controls all the Pioneer receivers. Gotta have the remote capabilities. HPM 100's modified. S-510. S-910 with rebuild woofers and ESS Model 10 Tweeters. Keeping an eye out for the originals
    • PioneerHPMLuver
    • Media item
    • pioneer hpm-100 pioneer s-510 pioneer s-910 sx-3000 sx-6000 sx-727 sx-980 yamaha rx-730
    • Comments: 1
    • Category: Member's System Pics
  4. surfnsound

    SX-6000 Restaurantion

    Got an SX-6000 in good visual shape, but its been a while since it did run. I think it will take ma a while to restore and wanted to open this thread. I open the receiver.... No sound There are two 3A channel fuses on the amp board. One was burned out, exchanged I get sound :-) :banana...
Back
Top Bottom