Another tonearm id question

[fdejong]

Anyone know which tonearm is mounted with this SP-10?

Came with a Pioneer headshell and a Stanton 681EEE. Have been Googling but no luck so far

 

[RickB]

Audio Technica ATP-12T

 

[fdejong]

Audio Technica ATP-12T

You're quick. Just found it myself too by reading the tiny print on the RCA plugs. Can't wait to try this setup out tomorrow.

Thanks!

 

[fiddlefye]

You're quick. Just found it myself too by reading the tiny print on the RCA plugs. Can't wait to try this setup out tomorrow.

Thanks!

SP-10, AT ProBase and ATP-12T. Should be good!

 

[fdejong]

SP-10, AT ProBase and ATP-12T. Should be good!

Is the AT ProBase the plinth/drawer it's mounted in? I just though it was a generic drawer...

 

[fiddlefye]

Is the AT ProBase the plinth/drawer it's mounted in? I just though it was a generic drawer...

It looks like the ProBase I (and a million others) have. It doesn't mean it is, but it looks like one. MDF clad in black melamine. You mentioned "drawer". Was yours set up to somehow pull out of a cabinet or something?

 

[majick47]

Never heard the term "drawer" used for a plinth/turntable base. I'll go along with the other AK members re the tonearm being the Audio Technica ATP12T, 10" professional broadcast tonearm. As Kent has advised the Stanton 681EEE will be a good match for the ATP12T. Is it a 1st generation SP-10 or SP-10Mk2? From photos I'd say it looks like a Mk2. Should be an excellent performing/sounding combination if properly set up.