• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Bookshelf Speaker ID

Rmac587

AK Subscriber
Subscriber
No markings, but the cabinet looks a lot like a infinity tide. The tweeter though looks like a Vifa. 6 inch woofer with some kind of poly material. Binding post looked pretty good, decent quality. I’m at a loss though....
 

Attachments

  • 759139F0-16D9-4667-9D91-9CAA29FBA4CF.jpeg
    759139F0-16D9-4667-9D91-9CAA29FBA4CF.jpeg
    69.8 KB · Views: 87
  • 28721AC2-45AD-4690-89F9-C073B7D518B8.jpeg
    28721AC2-45AD-4690-89F9-C073B7D518B8.jpeg
    68.6 KB · Views: 94
Register to hide this ad
Superficially resembles the Infinity Reference One (there were also other similarly styled Infinity models) but the Infinity's tweeter was centered and it had crappy wire clips rather than binding posts. Let alone the fact that the drivers are completely different.

Woofers look like they might be replacements, but only because of the gasket.
 
The cabinets, grill and tweeter look just like my BR-1's, but with the wrong woofers. Maybe someone replaced the original woofer?
20201023_132136.jpg
 
If there is a port on the back they probably are BR-1's with the wrong woofers. Or an older version of the woofer with lighter colored ring seal.
 
I'd bet that's the correct woofer (Dayton 295-305- now called the DC160-8)- and the gaskets are just sun-faded, or the top layer of black has been peeled off the gasket, or both.

Regards,
Gordon.
 
I'd bet that's the correct woofer (Dayton 295-305- now called the DC160-8)- and the gaskets are just sun-faded, or the top layer of black has been peeled off the gasket, or both.

Regards,
Gordon.
I think your right Gordon. They look exactly like the BR-1kits I built. The tweeters are very smooth and clear. Not an overly sensitive speaker, but they sound pretty good. I've been using them on my bench system for several years. Decent bottom end too. Some thought was put into the crossovers as well.
 
I think it’s the correct woofer, the material is very similar, it’s just the lighting and these were beat up. Thanks all of you!
They are nice sounding speakers. I've built several of the Dayton kits and these are my favorite. Replacement woofers are pretty cheap also.
 
Back
Top Bottom