Bose 901 eq help

[dangrusdave]

Trying to hook up Bose 901 eq to SA-9100. I think I’ve got it right.. but it’s not working. Does pre amp separation switch need to be in different position?

 

[larryderouin]

Got pictures of the connections? Should be something like, 9100 Preamp OUT to Bose input. Bose output to Main in on the 9100. And yes the separation switch needs to be moved from Normal. Owners manual here........ http://www.kallhovde.com/pioneer/sa-9100om.pdf Read explanations Page 6 (Purpose of PREOUT and POWER IN JACKS) and Page 9 (Low Filter) as it pertains to the switch also.

 

[whoaru99]

FWIW, 901 eq can be in pre out/power amp in circuit, but I think Bose 1st recommendation is in tape monitor loop.

 

[dangrusdave]

Got pictures of the connections? Should be something like, 9100 Preamp OUT to Bose input. Bose output to Main in on the 9100. And yes the separation switch needs to be moved from Normal. Owners manual here........ http://www.kallhovde.com/pioneer/sa-9100om.pdf Read explanations Page 6 (Purpose of PREOUT and POWER IN JACKS) and Page 9 (Low Filter) as it pertains to the switch also.

Thanks Larry, and muchas gracias for the maunal. I was going download from HIFi Engine today....Appreciate the help, first set of Bose I've ever owned.

 

[dangrusdave]

FWIW, 901 eq can be in pre out/power amp in circuit, but I think Bose 1st recommendation is in tape monitor loop.

Thanks I will try as well.

 

[leesonic]

+1 on putting it in the tape loop instead of the pre/power.