Cardboard can on a Fisher X-202

[Naptown Rob]

Cardboard can on a Fisher X-202?

I'm looking for a good source to replace the black cardboard can on an X-202 (not "B").
Sam's shows it as a 1000/1000uF 30volt. I didn't see one on AES.

 

[Naptown Rob]

This be the one...

 

[audiodon]

This is one that's easy. I use 1500uf 50 volt caps from Nichicon. They're quite small and you can either:
1. Put them under the chassis (as I said, they're quite small)
2. Take apart the can and fit 'em in.

 

[Naptown Rob]

Hmmm... I've never re-stuffed a can. Will I enjoy it?:scratch2:

 

[tube-a-lou]

Oh! yes, once you start you can't stop! I restuffed all my Can caps for my Fishers,
if you put one in the can you'll have more room for other stuff underneath if need
be.

Tube

 

[audiodon]

The replacement caps aren't large. Even in that unit you probably don't have to. It's not that hard though. It's harder to get the can on and off the chassis.