cscudelari
New Member
I have a Dual 704 and need a schematic of the antiskating mechanism... can anyone assist me? Also, if you know of a Dual parts place, that is probably going to be needed. Thx.
Dual 704
- Thread starter cscudelari
- Start date
Register to hide this ad
OvenMaster
Baby, you're my winterblue
I can point you towards a parts place:
http://www.turntableexperts.com/html/dual.html
These guys bought the remaining Dual parts inventory
As far as a diagram of the antiskating, I'm going to go out on a limb here and guess that the 7xx series is fairly similar from model to model except for mechanical refinements. I may be wrong about that, but here's a link to a 721's service manual:
http://fileserver.vinylengine.com/download_centre/index.php?dual_721_service_de.pdf
Disclaimer: I take no responsibility for the accuracy or similarity, or lack thereof, for the info I provide that is not exactly for your prescribed model of equipment. It is for reference only.
Tom
http://www.turntableexperts.com/html/dual.html
These guys bought the remaining Dual parts inventory
As far as a diagram of the antiskating, I'm going to go out on a limb here and guess that the 7xx series is fairly similar from model to model except for mechanical refinements. I may be wrong about that, but here's a link to a 721's service manual:
http://fileserver.vinylengine.com/download_centre/index.php?dual_721_service_de.pdf
Disclaimer: I take no responsibility for the accuracy or similarity, or lack thereof, for the info I provide that is not exactly for your prescribed model of equipment. It is for reference only.
Tom
cscudelari
New Member
Thx Tom for the tip (n/t). CS
No text
No text
pbda
Super Member
Try the Dual-Reference website: http://dual-reference.com/
