Interesting - the 600 has the older flat stamped faceplate like the FM-50. The 800's faceplate is much more like the later extruded panels.
Fisher ID
- Thread starter amphead4
- Start date
Interesting - the 600 has the older flat stamped faceplate like the FM-50. The 800's faceplate is much more like the later extruded panels.
I actually have another 800 with a slightly different faceplate. It's very similar to the extruded one, but it has end pieces attached, which give it a "framed in" look.
There are two versions of the 800- one has a piece of metal trim going around the entire face panel- almost like a picture frame.
The other version is the one pictured that is in Fisherdude's collection.
That's the one! I'd post a pic, but it's in "as-found" condition, and covered in dust. Later!
Follow-up question...I haven't tried mine to see if it fits yet, but does the one with the trim pieces around the panel still fit in the standard steel cabinet?
Operator's Manual and Schematic/Parts list for the 600 have been scanned and emailed to AK. These should be added to the Digital Docs database soon.
I noticed the Operator's Manual always referred to the unit as The 600 except in a warning about turning it on without a speaker load, where it was called a TA-600.
I noticed the Operator's Manual always referred to the unit as The 600 except in a warning about turning it on without a speaker load, where it was called a TA-600.
FloridaSam
I like tacos
Thank you very much for that! I have wanted a manual for mine for eons.
You folks are right, says The 600 on the face and TA-600 on the output transformer.
This things going to need some work - the tone has booming bass, like one of those pimp rides. We'll work on that after the recap.
Tubes are Fisher-branded and all innerds look original except for 6 OD caps, including the output couplers.
Brass face plate is like new.
This things going to need some work - the tone has booming bass, like one of those pimp rides. We'll work on that after the recap.
Tubes are Fisher-branded and all innerds look original except for 6 OD caps, including the output couplers.
Brass face plate is like new.
