• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Open Baffle Epiphany!

I always liked the design of these Emerald Physics. The size of the full range driver baffle is relatively small. Forcing the radiation of the woofers through the smaller openings is similar to the effect of slot loading.

hero.jpg
 
I fabricated the Eminence 15A/Betsy OBs today. I was so excited to have something I could listen to before an afternoon meeting that I cut the ply, installed the drivers, attached speaker wire to all of the drivers and connected to the AVR and SMSL amp as previously mentioned up-thread.

The AVR crossover arrangement works perfectly and the sound is outstanding and well-blended coming from the drivers. The room correction decided to cross the 15As at 120 hz, which I'll play around with as they burn in.

The 15As are massive, "big driver" cool and make big sound. Second, the amount of low bass they pump out stunned me. Based on earlier posts I expected a mild increase in "non-thumping" and articulated bass, but actually got massive gobs of thumping and slamming bass, so much so that even after running room correction I turned down the gain on the SMSL amp to cut the amount of bass cranking from the woofers.

I'll need to reconfigure speaker cables, pair/bind them and will let the drivers burn in for a few days. Then, I'll unmount the drivers and properly sand the ply, consider a wood finish and "complete" the set up by cleaning up wires. I'll try to add some pics in the next few days, but OMG the total sound coming from these OBs with the 15As on top of the Betsys is delightful, full, truly excellent. The total cost to do this was:

Betsys: $126
15As: $138
3/4" cherry-faced ply: $~40
SMSL amp: $62
Misc cable, quick connects, etc: ~$20

So, for less than $400 I gained a phenomenal set of gigantor-driver speakers that fit my application perfectly, look cool, sound BIG, and were fun as hell to set up. That's money well spent!
 
Last edited:
I've finally finished my open baffles with the Zenith 49CZ802 drivers. Everything was done in the living room of my small apartment with a plunge router, a cordless drill and some hand tools.
I asked about bass augmentation on these forums a few weeks ago. When I realized that adding bass augmentation would require buying a plate amp in addition to the Alpha 15As, I decided to hold off on the purchases and to augment the bass a little with folding wings.

Well the speakers sound just phenomenal. I'm sure more bass would be great, but they really sound very good now with the wings open. I have to say that the combination of the Musical Paradise 301-MKIII, homemade Duelund Coherent Audio DCA16GA tinned-copper wire interconnects and speaker cables and the Zeniths are really wonderful.

Here are some pics ...



20180424_223726.jpg

20180424_223819.jpg

20180425_002812.jpg
 
Nicely done!
Love the "Butcher Block look!
I don't use a plate amp for my Alpha's. I use a Hafler dh-100 with Fmods LP @ 70 hz..
It has more than enough power for the High Sensitivity of the 15a's.
 
Hi essNeff,
Thanks for the feedback ...

I'll have to look into the Fmod LPs. For now I'm just going to enjoy the music for a while ... no more sawdust in my living room, for now in any case ... lol ...
 
Bravo! Those look fantastic, much better than my project will when completed. I love these large drivers. They produce a very different sound that the typical small-driver-clusters used in modern box speakers. Great work.



I've finally finished my open baffles with the Zenith 49CZ802 drivers. Everything was done in the living room of my small apartment with a plunge router, a cordless drill and some hand tools.
I asked about bass augmentation on these forums a few weeks ago. When I realized that adding bass augmentation would require buying a plate amp in addition to the Alpha 15As, I decided to hold off on the purchases and to augment the bass a little with folding wings.

Well the speakers sound just phenomenal. I'm sure more bass would be great, but they really sound very good now with the wings open. I have to say that the combination of the Musical Paradise 301-MKIII, homemade Duelund Coherent Audio DCA16GA tinned-copper wire interconnects and speaker cables and the Zeniths are really wonderful.

Here are some pics ...



View attachment 1173484

View attachment 1173485

View attachment 1173487
 
I'm powering a set of 15As with a small SMSL TDA 50WX2 amp. Economical, sounds good (to me so far) and easy to tuck away within the other audio equipment I have.

Nicely done!
Love the "Butcher Block look!
I don't use a plate amp for my Alpha's. I use a Hafler dh-100 with Fmods LP @ 70 hz..
It has more than enough power for the High Sensitivity of the 15a's.
 
I'm sitting opposite these 15A/Betsy OBs tonight, listening to Supertramp. It's wall of sound down here. I don't understand how others have found the 15As to be light in deep bass. I've actually had to tweak the lower registers down because they dominate otherwise. Crossed at 120 hz, the bass is tight, just the sound of that massive diaphragm doing its thing in free air, no port noise, no excessive boom. A couple of hours in, I think I genuinely like the sound better than my Focal floorstanders upstairs. Again, the wall of sound. I enjoyed the Betsys on their own, but they absolutely required sub support for me to enjoy them alone. Not so with the 15As on board. I am deeply impressed. Pictures of these OBs will not impress, but goddamn they sound good to me.

I also can highly recommend the use of an AVR to defray the crossover issues and signal management when bi-amping, at least for beginners like me. I know they aren't audiophile approved, but the LFE signal on my AVR is easily configurable from 40 hz to 200 hz. Furthermore, the room correction algorithm did a great job of blending gain levels between the 15As and Betsys so that the drivers work together really well.

Wall of sound!
 
I'm not sure I get your meaning mkane. Is the idea that they produce bass frequencies but are not "musical"? They certainly aren't exotic and they didn't cost a ton. I do like the sound they make, blended with the Betsys. I'm sure there are better drivers and better configurations but I'm sold on the possibilities for sure.

Alpha 15's are considered a one-note bass driver.
 
Not musical would be the correct term. I had alpha's, now betas and my next upgrade will be different bass drivers again.
 
Back
Top Bottom