• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Piezo-Azden-Acutex Thread

Yes, Seth Kolon is his name............ but how do you know he's not a Canadian? ;)

It has been a couple of months since I corresponded with Kolon-san :) about upper level styli for the Piezo bricks. Maybe it's time for a follow-up.

I think if we were to "appoint" a liaison between our community and JICO it should be someone with a deep understanding of styli and their manufacture, someone who could stay with the conversation when it got all wonky. That isn't really me.

Also, it would be important to ensure that this sort of input from us would be welcomed by JICO. It wouldn't be good if they viewed any input from us as unwelcome. Apart from anything else, it would be prudent for us to assess the possible demand for anything we suggest to ensure it makes economic sense for JICO to produce the stylus.

John
How about a crowd-sourced project to fund the creation? Or at least a petition type thing?

Of course I can imagine everyone feels their cartridge deserves a SAS but if we can truly identify a desire for acutex azden piezo styli across the popular Internet turntable sites, we might have a shot?
 
Yes, Seth Kolon is his name............ but how do you know he's not a Canadian? ;)

It has been a couple of months since I corresponded with Kolon-san :) about upper level styli for the Piezo bricks. Maybe it's time for a follow-up.

I think if we were to "appoint" a liaison between our community and JICO it should be someone with a deep understanding of styli and their manufacture, someone who could stay with the conversation when it got all wonky. That isn't really me.

Also, it would be important to ensure that this sort of input from us would be welcomed by JICO. It wouldn't be good if they viewed any input from us as unwelcome. Apart from anything else, it would be prudent for us to assess the possible demand for anything we suggest to ensure it makes economic sense for JICO to produce the stylus.

John

John,

It was only a suggestion (advise & consent). :D

Perhaps a moderator can comment on this as the need arise. :scratch2:
 
How about a crowd-sourced project to fund the creation? Or at least a petition type thing?

Of course I can imagine everyone feels their cartridge deserves a SAS but if we can truly identify a desire for acutex azden piezo styli across the popular Internet turntable sites, we might have a shot?

Crowd sourcing to raise funds to effect a purchase from JICO? Who would then market the styli? Not JICO since they will have already sold us the styli a la EVG. Or do you envision that the individual contributors would simply be buying a stylus?

Either way, we'd need to figure out a cost from JICO based, I'm sure, on the quantity ordered. So, it would take a fair amount of spade work initially to assess the size of our market and then figure out how much cash would be needed.

Another problem I see is using AK's forums as the platform for launching a commercial venture of any kind. We'd be running afoul of the rules here if we did that.

I think it would be much better to convince JICO to, as wualta said, wrap the base of one of their boron cantilevers in soft iron, stick on a couple of mouse ears, stick an ML stylus on the end and shove the whole thing in one of their Piezo/Aiwa/Akai/Kenwood mounts. Then we could just buy them, as many as we want when we want.

John
 
Do we know if JICO is currently making any of the aftermarket 707-DE styli?

I wonder if the fact that Azden is still in business means the tooling and engineering drawings for the styli are still stored away somewhere. Might make it easier/more attractive for someone to restart production.

In any case, JICO seems to be slowly moving in a direction (with the V15V variant) that doesn't require them to try to adapt the current SAS design to something unsuited to it. Let's hope this trend continues and finds its way into some classic moving-iron designs.
 
By the way, it looks like the M312III STRs may be gone. Ebusinesspoint's eBay listing expired a week ago and hasn't been relisted. They do show a quantity of 20 available on their Blomming site and they still show as available on their eponymous site so there's also the possibility that they've just forgotten to relist them on eBay.
 
Last edited:
Do we know if JICO is currently making any of the aftermarket 707-DE styli?

I wonder if the fact that Azden is still in business means the tooling and engineering drawings for the styli are still stored away somewhere. Might make it easier/more attractive for someone to restart production.

In any case, JICO seems to be slowly moving in a direction (with the V15V variant) that doesn't require them to try to adapt the current SAS design to something unsuited to it. Let's hope this trend continues and finds its way into some classic moving-iron designs.

JICO still lists, and I may have missed some, styli for the Akai PC-100 (conical) and PC-120 (elliptical), the Hitachi MT-103 (conical), the Kenwood V-45 (conical) and the Piezo YM-308/2 (conical). It seems that the current choice, and the only "DE", would have to be the Akai PC-120 since it's the only elliptical in the bunch. The rest would be 707-D7 I suppose.

In reviewing my correspondence with Kolon-san, I see that he mentioned that it appeared the Piezo brick and, by extension, short-nose styli aren't adaptable to the geometry/physics of the SAS. This more or less confirms my suspicion that the problems dlaloum mentioned with regard to the A-T V-magnet styli extend to the Piezo V-armature styli. I suspect it has to do with all these appendages hanging off the cantilever forward of the fulcrum point.

I think we can still hope for an HE or MR version of these styli, perhaps on an exotic cantilever though. Fingers crossed!

John
 
Last edited:
Crowd sourcing to raise funds to effect a purchase from JICO? Who would then market the styli? Not JICO since they will have already sold us the styli a la EVG. Or do you envision that the individual contributors would simply be buying a stylus?

Either way, we'd need to figure out a cost from JICO based, I'm sure, on the quantity ordered. So, it would take a fair amount of spade work initially to assess the size of our market and then figure out how much cash would be needed.

Another problem I see is using AK's forums as the platform for launching a commercial venture of any kind. We'd be running afoul of the rules here if we did that.

I think it would be much better to convince JICO to, as wualta said, wrap the base of one of their boron cantilevers in soft iron, stick on a couple of mouse ears, stick an ML stylus on the end and shove the whole thing in one of their Piezo/Aiwa/Akai/Kenwood mounts. Then we could just buy them, as many as we want when we want.

John

Perhaps a kickstarter initiative isn't exactly what I had in mind, but perhaps a group-buy model is more correct. Effectivey, rally enough people up to say hey JICO, we have y people here with $xxxx, ready to give you, for the development and purchase of this particular styli. Once their tooling and etc. are created, they can continue to market the products as part of their catalog, much like the hundreds of other styli they produce.

And I do agree also that we can suggest the NON-sas type styli development like with the V15 variant mentioned, keep the same design as the standard 707-DE but with a MR stylus on a boron cantilever ? I would imagine that it would not be as significant an investment in time and money on their part compared to a SAS
 
Meanwhile, going through my Acu-archives, I discovered something embarrassing: I didn't know the Acutex 307 II E is not at all the same cartridge as the Acutex M307 II E. And the brochures I have are no help.

They're both big non-LPM style cartridges, but the non-M 307 has the slide-on-from-behind stylus (same body as my Piezo YM-310) and the M307 has the big magnet and the push-on-from-below 707-DE stylus. Both tripoles and all that, just not the same layout.
 
Last edited:
Meanwhile, going through my Acu-archives, I discovered something embarrassing: I didn't know the Acutex 307 II E is not at all the same cartridge as the Acutex M307 II E.

They're both big non-LPM style cartridges, but the non-M 307 has the slide-on-from-behind stylus (same body as my Piezo YM-310) and the M307 has the big magnet and the push-on-from-below 707-DE stylus. Both tripoles and all that, just not the same layout.

I know. I'm not sure whether Acutex could have made their numbering system more confusing if they'd actually set out to do it.

(I've been referring to the Piezo YM-320/Spectrum SC212 II E/Acutex 307 II E as the "short-nose" type to distinguish it from the "long-nose" LPMs and the Piezo YM308/Acutex M307 II E "brick". I don't know whether I'm helping or hurting the matter. ;))

John
 
Hmm, I realize this is not quite applicable in our case, since the product we have in mind doesn't actually exist (it's more of a request to have something made-to-order) but I thought this is nice to keep in mind if we ever do make an endaevour like this

https://www.massdrop.com/how-it-works
 
By the way, it looks like the M312III STRs may be gone. Ebusinesspoint's eBay listing expired a week ago and hasn't been relisted. They do show a quantity of 20 available on their Blomming site and they still show as available on their eponymous site so there's also the possibility that they've just forgotten to relist them on eBay.

Could it be the last one was sold (as a single-quantity listing)?

http://www.ebay.ca/itm/TESTINA-ACUT...I-INTROVABILE-STYLUS-FOR-NUOVA-/251671378777?

:pity:

RIP :angel:

:thumbsdn:
 
I'm lurking and finding this topic murky — tripolar being a new thing for me.

As I am living in Japan, and because the giant 'Yodobashi Camera' where I pick up audio stuff from time to time seems to have some pull and leverage with Jico, perhaps I can go and talk directly with the the Yodobashi staff — if you have a specific question.There is a young guy there who is really into vintage audio and vinyl. I think I still have his card. — Lorne
 
I'm lurking and finding this topic murky — tripolar being a new thing for me.

As I am living in Japan, and because the giant 'Yodobashi Camera' where I pick up audio stuff from time to time seems to have some pull and leverage with Jico, perhaps I can go and talk directly with the the Yodobashi staff — if you have a specific question.There is a young guy there who is really into vintage audio and vinyl. I think I still have his card. — Lorne

I guess The Mysteries of the Tri-Polar Universe were discussed in earlier threads regarding these cartridges. There is, however, an Acutex brochure from around 1980 that discusses the design. I have the brochure on my HD but the file is too large for AK. This thread at Lenco Heaven is pretty informative and the tri-pole design is explained in Reply #54 with a portion of that brochure.

John
 
Lorne, turn that puzzled frown upside down. Don't you be a murky lurky. Tripole tech needn't be mysterious. It's simply an elaboration of the induced-magnet principle, but elaborated in the direction of Audio-Technica's V-magnet setup, except instead of little rod-magnets, there are little soft-iron discs .

In fact, at some point, someone made replacement styli for the Acutexans that were in everything but name Audio-Technica V-magnet styli-- though how they were supposed to work alongside that big honking magnet already in place in the middle of the body, I don't know.

The 1980 brochure should make it all clear. It should also be clear that the stylus assembly is complex, and probably expensive to manufacture, which could be the reason the simpler moving-magnet styli were resorted to.
 
The 1980 brochure should make it all clear. It should also be clear that the stylus assembly is complex, and probably expensive to manufacture, which could be the reason the simpler moving-magnet styli were resorted to.

Here's the section on the tri-pole principle.

John

i6gkcn.jpg
 
Could it be the last one was sold (as a single-quantity listing)?

http://www.ebay.ca/itm/TESTINA-ACUT...I-INTROVABILE-STYLUS-FOR-NUOVA-/251671378777?

:pity:

RIP :angel:

:thumbsdn:

Just got this response from EBusinessPoint, the seller of these Acutex LPMs:

"Hello, at the moment they are no longer available, maybe next week we will have a few more pieces of the Acutex M312III, thanks best regards The Staff EBusinessPoint."

I asked them to let me know if they get more.

John
 
Wow, thanks! We can continue to recommend this cartridge for folks who are about to lose hope of getting a good-sounding line-contact-equipped cartridge for less than $80 (if they keep the price the same).
 
Back
Top Bottom