• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Piezo-Azden-Acutex Thread

Here are four variants of the 'generics'
First is in a branded Hitachi Box but no markings on the stylus(no stereo sticker).
It seems to be of good quality and the tri-pole ears are flat..while the z axis seems to have a shroud covering part of the metal pole ,a bit of the metal pole seems exposed where it surround the cantilever. The inclusion of the magnetic shield suggests that this z axis is indeed the third induced pole.
The second is from the Pinnacle brand..and also seems ok..electrical shielding in place etc , x and y have similar 'flat' ears ..and the z axis induced pole at the base of the cantilever is clearly visible with no such 'shrouding'.
The last two are from the Eurochannels brand and another unbranded generic and I've included several pics side by side for comparison..
The Eurochannels version is on the left..and shares the flat ears of the Hitachi and Pinnacle version with metal shielding and the z axis pole is also visible.
The unbranded version on the right has neither shielding or flat ears on the x y axis..and the z axis 'pole' is either under some covering(glue ?) or perhaps isn't there at all ?:scratch2:
There are a few more generic versions where the magnet shielding is mostly a thin metal cylinder that fits over the round magnet in the cartridge body ..as opposed to the 'side plates' shown in these pics...and are probably closer to the original design.
I'll have a dig tomorrow and see if i have one of those also..
 

Attachments

  • hitachi ds- st103- branded packaging.jpg
    hitachi ds- st103- branded packaging.jpg
    57.8 KB · Views: 75
  • hitachi ds- st103- branded packaging-02.jpg
    hitachi ds- st103- branded packaging-02.jpg
    50 KB · Views: 67
  • pinnacle brand.jpg
    pinnacle brand.jpg
    55.7 KB · Views: 68
  • pinnacle brand-2.jpg
    pinnacle brand-2.jpg
    53.6 KB · Views: 68
  • eurochannels and unbranded -01.jpg
    eurochannels and unbranded -01.jpg
    66.4 KB · Views: 73
Last edited:
a few more side by side pics of the *Eurochannels* vs unbranded generics ( i think the unbranded versions sometimes turn up as Topodis..but they seem slightly inferior to the others..)
 

Attachments

  • eurochannels and unbranded -05.jpg
    eurochannels and unbranded -05.jpg
    54.6 KB · Views: 49
  • eurochannels and unbranded -04.jpg
    eurochannels and unbranded -04.jpg
    46.7 KB · Views: 46
  • eurochannels and unbranded -03.jpg
    eurochannels and unbranded -03.jpg
    44.8 KB · Views: 42
  • eurochannels and unbranded -02.jpg
    eurochannels and unbranded -02.jpg
    52 KB · Views: 52
As we say here in the States, daaang. The unbranded generic in the photos in post 123 has a cantilever/suspension assembly that's a dead ringer for a moving-magnet Audio-Technica. You could check to make sure those little bars sticking out where they'd be in an Audio-Technica are really magnets, but I have little doubt they are. Might well work in the same body as the MI version. A hybrid design, or just a cheap-out by the aftermarket?

Are any genuine/original/factory styli equipped with V-magnets, aside from one of the Spectrums?
 
Last edited:
The originals I've seen all have the model number of the cartridge they belong to printed on the label. Certainly those for the YM-308 are so marked, Also, at least in my experience, the armatures on the original styli are fixed to the cantilever by a bright blue adhesive, visible with the naked eye.

That seems about right as I have two stylus that are marked pc-100 for the akai and ym-308 for the Piezo...I think the main thing with the 'aftermarket' version is how old they are. I.E. the replacements made around the time the cartridges were available may be of better quality (and perhaps different compliance) than those made a few years later.
The thing I've noticed in a couple of the later versions with the rounded or square section ears and no shielding is that there is no *plate* behind the suspension with the screw to adjust the compliance..as found in the earlier versions witht he flat ears and shielding.
Perhaps with a diminished market for these cartridges,( and let's face it they pretty much took the world by storm around 1978 and then vanished by around 1983(?), ..perhaps..the last aftermarket samples simply went with a once size fits all generic body..excluded the shielding, flat ear and adjustment for complaince.....and simply made the suspension rubber stiffer to suit the 'average' consumer table..:scratch2:
 
Thanks! Your "unbranded" one is a non tri-pole, non IM stylus, just like the one shown earlier in the thread. It even has the red dot on the cantilever. As you can see, it also lacks the metal "slug" that would sit below the magnet and the U-shaped shield that all the others have. The "ears" for the X and Y poles are in fact magnets, or so I believe, rather than "inducers" so this stylus is of the same design as the moving magnet Audio-Technica "V Magnet" styli.

John

OOPS ! I see Walt beat me!
 
Last edited:
As we say here in the States, daaang. The unbranded generic in the photos in post 123 is a moving-magnet Audio-Technica-looking version. You could check to make sure those little bars sticking out where they'd be in an Audio-Technica are really magnets, but I have little doubt they are. Might well work in the same body as the MI. A hybrid design, or just a cheap-out by the aftermarket? Are any genuine styli equipped with V-magnets, aside from one of the Spectrums?

These are for the older Acutexan tripole 3 series bricks btw. The stylus all have the familiar curved side fitting and the cartridge has an unmistakable profile.
I don't think i've seen any Audio technica cartridge so far that cloned this particular cartridge shape, but please share a pic or link if you have one as it's still a mystery who else added a brand to this Piezo/Acutex design.
We know Akai , Acutex, Piezo , Hitachi and Eagle all have a version of this cartridge...it would be interesting to see other examples..I'll include a side profile picture of the 3 series brick just to avoid confusing y'all.. :D
 

Attachments

  • wrm8mu.jpg
    wrm8mu.jpg
    42.4 KB · Views: 54
Last edited:
boreas said:
...The "ears" for the X and Y poles are in fact magnets..
And big fat heavy-looking magnets, at that.

boreas said:
OOPS ! I see Walt beat me!
But you rightly pointed out that there's no soft-iron sleeve and plate to constitute the Z-axis on the [allegedly] MM stylus.
 
Last edited:
These are for the older Acutexan tripole 3 series bricks btw. The stylus all have the familiar curved side fitting and the cartridge has an unmistakable profile.
I don't think i've seen any Audio technica cartridge so far that cloned this particular cartridge shape, but please share a pic or link if you have one as it's still a mystery who else added a brand to this Piezo/Acutex design.
We know Akai , Acutex, Piezo , Hitachi and Eagle all have a varsion of this cartridge...it would be interesting to see other examples..I'll include a side profile picture of the 3 series brick just to avoid confusing y'all.. :D

I think the white body suggests a Piezo or Hitachi brand for the cartridge in your picture. The 300 series Acutex bricks had black, gray or blue bodies.

What's Audio Technica-like on your unbranded generic stylus is just the V-magnet arrangement on the cantilever (as well as the little black rubber collar forward of the magnets). I don't believe AT ever made a cartridge that resembled the brick.

John
 
The "ears" for the X and Y poles are in fact magnets, or so I believe, rather than "inducers" so this stylus is of the same design as the moving magnet Audio-Technica "V Magnet" styli.

I haven't tested the x y poles of the last unbranded version...but the stylus itself is shaped to fit a tri-pole body cartridge as can bee seen by the barrel shaped plastic moulding.
Despite not having an obvious z axis pole...I'm not sure making if using magnets for the x y poles would work in a tri-pole body ?..so i'm guessing that the magnetism is still 'induced' in this particular design too...they just cheapened it out and forgot that the whole point of tripole...is the Z axis.. :D
I fear that this last unbranded design..is probably just cost cutting...no z axis..no shielding...but it works well enough to sell in the older tri-pole stubby brick body.
 
Last edited:
melofelo said:
..I don't think i've seen any Audio-Technica cartridge so far that cloned this particular cartridge shape...
Neither have I. That's why it was such a shock to see it in a MI-type stylus grip for Acutex. Maybe Audio-Technica was a silent partner in the Acutex venture. Dunno. But it is interesting that the tripole design looks very much like the IM analog of Audio-Technica's VM design, almost as if they'd been intended to be more or less interswappable from the start. Verrry interesting.

melofelo said:
I fear that this last unbranded design..is probably just cost cutting...no z axis..no shielding...but it works well enough to sell in the older tri-pole stubby brick body.
I think you are correct, but I also think that, as I said, Acutex hedged their bets by making the designs sneakily similar.
.
 
Last edited:
I think the white body suggests a Piezo or Hitachi brand for the cartridge in your picture. The 300 series Acutex bricks had black, gray or blue bodies.

Akai and Piezo used a white body in their tri-poles and possibly Hitachi too..although I've never seen a Hitachi MT-103 cartridge ..which is allegedly the cloned tri-pole culprit that the stylus fits.
.I think the Acutex branded version of these tri-poles did indeed correspond to a colour scheme..but mostly to differentiate what stylus to use..from the elliptical up to the vital str which i think was all black.
The 3 series stubby tri=pole bricks bodies are actually all the same design regardless of colour.
 
Thanks! Your "unbranded" one is a non tri-pole, non IM stylus, just like the one shown earlier in the thread. It even has the red dot on the cantilever. As you can see, it also lacks the metal "slug" that would sit below the magnet and the U-shaped shield that all the others have. The "ears" for the X and Y poles are in fact magnets, or so I believe, rather than "inducers" so this stylus is of the same design as the moving magnet Audio-Technica "V Magnet" styli.

John

OOPS ! I see Walt beat me!

Actually..this make sense ...if the induction plate behind the cantilever is missing. But...hm...wouldn't' that make the big barrel magnet in the body redundant ?:scratch2: Because that stylus can only fit a tri-pole body...perhaps this last stylus bypasses the tri-pole design back to to a bog standard dual magnet cartridge...hm..what a waste.
 
Last edited:
Yes, indeed it would! Which is what makes this whole thing a little mysterious.
 
Actually..this make sense ...if the induction plate behind the cantilever is missing. But...hm...wouldnt' that make the big barrel magnet in the body redundant ?:scratch2:

Yes, it would and inserting a pair of magnets into the body, bringing them in proximity to the coils, would allow it to function. So, it would work but work as an MM, like an AT, and, of course, it would be "bi-polar". :D

John
 
Last edited:
Yes, it would and inserting a pair of magnets into the body, bringing them in proximity to the coils would allow it to function. So, it would work but work as an MM, like an AT, and, of course, it would be "bi-polar". :D

John

:D I Had to get a coffee and wrap my head around the problem...then revise my last post..and in the meantime...you solved it!..haha..:thmbsp:
So basically i should throw that last one in the bin ..hm..if it says tri-pole..i want TRI-POLE SOUND!...:D
 
Actually...having a cartridge body that can be tri-polar or bi-polar...depending on what stylus you fit... is bloody genius when you think of it.. :D:D:D
 
There's only one possible problem, and you mentioned it just a few posts back: the sound is inferior. This has been the result anytime we've found someone has stuck a magnet (or two) on an ostensibly-MI cantilever assembly to make a universal hybrid. In some cases the level drops by ~10dB. In others there are tracking problems. In others the shape of the frequency response envelope alters for the worse. This I've always attributed, rightly or wrongly, to the presence of two (or three) interacting magnets, wholly aside from the effect of increased effective mass of the moving system.

Now, if you can find a stylus with the V magnets that sounds as good as an IM stylus....
 
Last edited:
There's only one possible problem, and you mentioned it just a few posts back: the sound is inferior. This has been the result anytime we've found someone has stuck a magnet (or two) on an ostensibly-MI cantilever assembly to make a universal hybrid. In some cases the level drops by ~10dB. In others there are tracking problems. In others the shape frequency response envelope alters for the worse. This I've always attributed, rightly or wrongly, to the presence of two (or three) interacting magnets.

Now, if you can find a stylus with the V magnets that sounds as good as an IM stylus....

Again this makes complete sense. :thmbsp:
You have only to look at the sheer size of the barrel magnet fitted to the original 3 series bricks to realise that changing back to two magnets on the cantilever...basically means :
a: you're adding mass to the cantilever
b: the cantilever magnets themselves have to be powerful enough to drive a coil circuit designed to work with a single large barrel magnet that has been bypassed
c: all you end up with..is a basic dual magnet design..in a cartridge body that has *unused* and maybe *Unshielded* magnetic mass right where you least need it.
d: the suspension compliance has to be altered to accomodate the changes in moving mass and unnecessary weight

I'd recommend sticking to the shielded tri-pole generics if you have this particular tri-pole body..:D
The few I have tried sound pretty good indeed.
 
Last edited:
@ Boreas and Wualt...#Thanks for putting up with my slow brain by the way...A long day + missing inducer plates from supposedly tri-pole stylus in my stash...well whew...
logic took a back seat to coffee...

But...at least it's a bit easier to spot which ones to avoid from the generics
:o)..:thmbsp:
Much appreciate and enjoy all your invaluable insights, it's been a Superb thread so far...(my brain fade aside..:sigh:)
:thmbsp:
Here is another stylus:
Eagle brand but blue body..which is probably the same spec as the Acutex range..probably made by Piezo around 1980 for the UK market.
 

Attachments

  • eagle.jpg
    eagle.jpg
    57.5 KB · Views: 62
Last edited:
Back
Top Bottom