• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Piezo-Azden-Acutex Thread

Aaah, don't mention it. I should point to a true "universal" cartridge I own that was probably made by Azden: the Sanyo MG-66/67 twins.
Oh, and vigorous head-nods to everything you said in post 139.
 
Last edited:
Thanks for your patience :D added a pic above of another tri-pole rascal. Made by Piezo round 1980.
Someone in Australia bought all remaining stocks of these from the seller..about 45 in total in one go... if you spot them for sale...I think that's as close as you'll get to an 'original' shibata tri-pole stylus for the 3 series acutexan bricks...:sigh:
 
Thanks for the photo. Interesting that Eagle, the UK distributor, sold Acutex-looking styli with Shibatas, while US Acutexans (yee haw) used Toshiba's Symmetrical Tri-Radius (STR) stylus, which was expressly, emphatically not a Shibata.
 
Thanks for the photo. Interesting that Eagle, the UK distributor, sold Acutex-looking styli with Shibatas, while US Acutexans (yee haw) used Toshiba's Symmetrical Tri-Radius (STR) stylus, which was expressly, emphatically not a Shibata.

Yes, I noticed that too and, yes, very interesting. I believe it's unique among these cartridges. The Piezo version, the YM-308II X used the "Toshibata tm".

But I guess these customer models could be spec'd in many different ways. If the customer, Eagle in this case, wanted a Shibata, Piezo would just get on the blower to Ogura and Bob's your uncle.

John
 
As far as I can tell from old reviews, the Eagle UK variants had at least two versions, the p750x (elliptical) and p 750sx (shibata).
Maybe there was a plain 750 spherical..but I've not been able to find any info.
Hi-fi choice wasn't overly impressed by either the 750x or 750sx in a cartridge round up shootout back in 1980 but a small review from Gramophone seemed quite favourable toward the 750x.
 

Attachments

  • eagle p750x review-page-001.jpg
    eagle p750x review-page-001.jpg
    156.9 KB · Views: 73
  • eaglle-01.jpg
    eaglle-01.jpg
    118.5 KB · Views: 66
  • eagle-02.jpg
    eagle-02.jpg
    63.5 KB · Views: 62
  • eagle-03.jpg
    eagle-03.jpg
    117.3 KB · Views: 66
Last edited:
As far as I can tell from old reviews, the Eagle UK variants had at least two versions, the p750x (elliptical) and p 750sx (shibata).
Maybe there was a plain 750 spherical..but I've not been able to find any info.
Hi-fi choice wasn't overly impressed by either the 750x or 750sx in a cartridge round up shootout back in 1980 but a small review from Gramophone seemed quite favourable toward the 750x.

Thanks! The review says that the X was TOTL out of three cartridges until the SX came along so there apparently were 4 Eagles at one time or another. They could have been of a different type though, maybe Spectrum type short-noses.

John
 
The Australian seller that melo mentioned apparently is down to his last brace of Eagle PS750SX styli. They're on eBay Australia for 95.00 SUD a pop plus shipping, apparently to Australia only. Well, I've been spending enough on cartridges and styli lately.

John
 
Right. Time to spend some on Eagle orthodynamic headphones with their Sawafuji drivers.
eagle H4300_1b.jpg
 
Last edited:
Right. Time to spend some on Eagle orthodynamic headphones.


There ya go!

A while back there was a set of Acutex headphones on eBay. I was mildly intrigues and was planning to bid on them but I forgot. They looked decent and went cheap.

John
 
A Brother Tripole from an Unexpected Quarter

Anyone recognize this design?

ADC TRX-1,2- cutaway view.jpg
You're right, it's a tripole induced-magnet job, though with squared-off "ears" and a small SmCo magnet behind the cantilever, Micro-Seiki style. Hint: one of the models had a sapphire-tube cantilever. The replacement stylus bolted on, Audio-Technica 23/24/25 style. But it looks very much like the old Azdens and Acutexes we've been having inexpensive fun with. The Brother Tripoles were anything but inexpensive, however.
 
Last edited:
Anyone recognize this design?



You're right, it's a tripole induced-magnet job, though with squared-off "ears" and a small SmCo magnet behind the cantilever, Micro-Seiki style. Hint: one of the models had a sapphire-tube cantilever. The replacement stylus bolted on, Audio-Technica 23/24/25 style. But it looks very much like the old Azdens and Acutexes we've been having inexpensive fun with. The Brother Tripoles were anything but inexpensive, however.

Is this Brother as in sewing machines and typewriters? Shades of Braun!

I wonder whether these were Axden-supplied OEM.

John
 
boreas said:
I wonder whether these were Axden-supplied OEM.
I often find my life done up in Shades of Braun, but this is not one of those times, happily. But yes, I do find myself axing if this is an Axden/Piezo OEM job. I think the answer "yes" is inescapable. This has been pointed out by people here and there over the last decade or so, but the reaction has always been a dull thud.

Anyway. What you're looking at is the innards of the near-mythical definitely-legendary ADC TRX-1 or -2. Imagine my surprise. Another brother from the Acutex mother. The worshipful reviews of the TRX line should make stylus makers sit up and take notice. There's potential in the tripole design, and high-end styli might bring it out of even the humbler Acutex-branded carts we've been playing with.

Still looking for a similar diagram for the beryllium-equipped TRX-3.
.
 
Last edited:
I often find my life done up in Shades of Braun, but this is not one of those times, happily. But yes, I do find myself axing if this is an Axden/Piezo OEM job. I think the answer "yes" is inescapable.

What you're looking at is the innards of the near-mythical definitely-legendary ADC TRX-1 or -2. Imagine my surprise. Another brother from the Acutex mother. Still looking for a similar diagram for the beryllium-equipped TRX-3.


All this talk of fancy cantilevered Acutex-zden carts make me really want to get a JICO SAS made for these carts ASAP! Or failing that, a soundsmith ruby cant. retip!
 
All this talk of fancy cantilevered Acutex-zden carts make me really want to get a JICO SAS made for these carts ASAP! Or failing that, a soundsmith ruby cant. retip!

In another thread dlaloum (I think) mentioned that SAS styli weren't amenable to the design of some styli. I think Audio-Technica's V-magnet styli were the example he cited. He was specific about the reasons for this but I can't recall what they were. In a general sense, however, the reasons were related to the V-magnets.

It occurs to me that the "V-armatures" of the tripoles might present the same obstacle. If so, we might have to "resign ourselves" to a JICO Shibata or HE for the short noses and bricks. I don't know about the LPM tripoles.

The bricks would be simple. JICO already makes styli for these and it would be very simple to just shove a Shibata or HE tip onto the cantilevers they already make. :dunno:

John
 
Anyone recognize this design?



You're right, it's a tripole induced-magnet job, though with squared-off "ears" and a small SmCo magnet behind the cantilever, Micro-Seiki style. Hint: one of the models had a sapphire-tube cantilever. The replacement stylus bolted on, Audio-Technica 23/24/25 style. But it looks very much like the old Azdens and Acutexes we've been having inexpensive fun with. The Brother Tripoles were anything but inexpensive, however.

Specs and drawings for these little beauties!

TRX-1

TRX-2

TRX-3

Paste the kanji into Bing Translator and all will be revealed. :)

All have one form or another of the "Vital" stylus which, as we know, is found on many other Piezo/Azden tripoles and, I think, is their trademark fro the "Toshibata" line contact stylus.

John
 
The [few] people who own TRX-3s keep claiming the 3 differs internally from the 1 and 2, so I'm still looking for a nice cutaway drawing of the TRX-3 showing us whether there were really any differences, which I doubt, but I'd still like to see.

The electrical specs (the few that are available, though they are telling) look the same on the Japanese database site, but I'd still like to see a brochure or user guide. Meanwhile, the TRX-2:

1a.jpg

Farz I know, Vital was/is an Ogura trademark, though the overall shape used here looks similar to the "Toshibata", and the 1980 brochure says all the STRs were made by Ogura under license from Toshiba. So is the Vital STR that's used in the TOTL 320 bricks and LPMs entirely a Toshiba design? Maybe not. "Vital" could refer to the special lightened 'tombstone' diamond-- in other words, to the overall size and shape of the diamond shank, not the playing tip. The normal STR diamonds have a square shank. Sumiko calls the Ogura Vital "a costly design profile that removes excess 'moving mass closest to the tip of the cartridge, leaving only that which is deemed vital.' "

As for what JICO might be able to do for us.. If they take your [boreas'] suggestion seriously and tool up to make the Mickey Mouse soft iron armature and wrap it around a boron whisker with a microridge-type diamond on the end.. I'd consider smiling..
 
Last edited:
liaison

It would be nice to have an AK turn table forum spokesmen-liaison.

Some one who would correspond with JICO on our behave!
 
They (JICO) have an American working as their representative.

We should have some one who can tell them about our needs. :yes:
 
They (JICO) have an American working as their representative.

We should have some one who can tell them about our needs. :yes:

Yes, Seth Kolon is his name............ but how do you know he's not a Canadian? ;)

It has been a couple of months since I corresponded with Kolon-san :) about upper level styli for the Piezo bricks. Maybe it's time for a follow-up.

I think if we were to "appoint" a liaison between our community and JICO it should be someone with a deep understanding of styli and their manufacture, someone who could stay with the conversation when it got all wonky. That isn't really me.

Also, it would be important to ensure that this sort of input from us would be welcomed by JICO. It wouldn't be good if they viewed any input from us as unwelcome. Apart from anything else, it would be prudent for us to assess the possible demand for anything we suggest to ensure it makes economic sense for JICO to produce the stylus.

John
 
Back
Top Bottom