• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Pioneer PL-45D

Zonian

Endangered Species
Gotta line on one at what sounds like it may be a bargain price (under $75).
Anyone have experience with this model?
What say ye, yay or nay?
 
Register to hide this ad
Oops! Got in a hurry and made a "typo"!

Yes...PL-A45D was in fact what I meant to type.

That being the case, working, you think it's a keeper? I have absolutely no knowledge of this particular model.

Where does is rate...High...Middle...Low...as far as vintage Pioneer gear goes?
 
Oops! Got in a hurry and made a "typo"!

Yes...PL-A45D was in fact what I meant to type.

That being the case, working, you think it's a keeper? I have absolutely no knowledge of this particular model.

Where does is rate...High...Middle...Low...as far as vintage Pioneer gear goes?

I don't know either! :D
 
Bumping this back up before it winds up on page 2.

Still looking for input on this model Pioneer Turntable: PL-A45D.

Anyone have/had one? Recommend it or should I turn tail?

My time to make a decision on this is somewhat short...

...any useful input would be greatly appreciated.
 
Bumping this back up before it winds up on page 2.

Still looking for input on this model Pioneer Turntable: PL-A45D.

Anyone have/had one? Recommend it or should I turn tail?

My time to make a decision on this is somewhat short...

...any useful input would be greatly appreciated.



For under $75 I would say yes. I am assuming you realize it most likely is not a step up from your SL-1200 MkII I think it is a decent alternate/backup to it.

Check the auto features, check the belt, check to make sure the tone arm does not have any play.

good luck, Bob
 
Loving my SL-1200MK2, but thinking of expanding my Pioneer gear.
Thank you for your useful input, Bob.
 
I recently picked up a PL A45D on the cheap and was ecstatic because I'd wanted one since being a teenager in the 70s. The fact that it's belt drive with a (mediocre) suspension lends itself to the style of table I personally like, and having it be fully automatic was a plus for the wife acceptance factor. Plus, it's a handsome match for Pioneer SX 850.

I had to get its output cables replaced, but now the table is in near mint condition, and all I can say is... meh. The automatic start and stop functions are very noisey, the arm is very high mass so you'll need a low compliance cartridge, and the manual cueing mechanism is not very smooth. I'm currently running a Stanton 681EEE on the arm which isn't very good, but still I'm way less impressed with this table than I'd hoped.

Depending on the condition of your find (and its cartridge) I'd say $75 is a decent price. I'm now into mine for $110 and expect to sell it for $150 shortly. Personally, for a fully automatic table of this era I'd go for a Dual 1249 next time around.
 
Wow! now that's the sort of feed back I was hoping for! If the cost of this sucker stays way low, I'll be in the market just because I'm into the look of it, after that, I think I'll pass.
Thanks a bunch!
 
Back
Top Bottom